Abstract:Flexible superhydrophobic surfaces have been attracting more and more attention due to their foldable property. However, the superhydrophobic structure was easily damaged or destroyed owing to their poor interfacial force between substrate and superhydrophobic coating. Herein, fluorinated silica nanoparticles (F-SiO 2 ) were sprayed onto the wet poly(amide–imide) (PAI) surface, which made F-SiO 2 easily went into PAI substrate to enhance the durability of superhydrophobic surface. The PAI/F-SiO 2 flexible surface exhibited a water contact angle (CA) of beyond 160° and a sliding angle (SA) of as low as 3°, while the tensile strength (34 MPa) was comparable to that of PAI substrate (35.8 MPa). Encouragingly, the superhydrophobicity and hierarchical porous structure of PAI/F-SiO 2 surface were maintained even they were folded by 5000 times or underwent sandpaper abrasion test (500 cm of wear on a 1200 grit sandpaper under 50 g load), while the nanocomposites failed the sandpaper abrasion test when F-SiO 2 were sprayed onto completely dried PAI surface. More importantly, the CA and SA just slightly decreased when PAI/F-SiO 2 surfaces were heated at 300 °C for 24 h due to the unique surface morphology and high thermal stability of PAI, which is one of the highest thermal stabilities for flexible superhydrophobic films. In addition, PAI/F-SiO 2 surfaces maintained superhydrophobic after hot water jet impact, acid–base immersing, UV irradiation, and ultrasonic treatment, indicating the fabricated surfaces could be used for practical application especially under harsh conditions. Furthermore, the superhydrophobic surfaces possessed icephobic properties. It should be noted that PAI/F-SiO 2 surfaces showed such excellent properties, although their fabricating procedure did not undergo any optimization. This wet spraying method was also used to fabricate flexible superhydrophobic surfaces with other polymers as substrates such as poly(acrylic acid) (PAA), thermoplastic polyurethane (TPU), polystyrene (PS), and poly(vinyl alcohol) (PVA). Therefore, the simple strategy provided a general route to prepare flexible superhydrophobic films with high durability.

Facile preparation of TPE/SiO2 flexible superhydrophobic composite film with acid corrosion resistance and stretchable recyclability

Facile Fabrication of Superhydrophobic Nanocomposite Coatings Based on Water‐Based Emulsion Latex

Femtosecond Laser Fabricated Elastomeric Superhydrophobic Surface with Stretching-Enhanced Water Repellency

Robust Superhydrophobic SiO2/polydimethylsiloxane Films Coated on Mild Steel for Corrosion Protection

Fabrication of durable polytetrafluoroethylene superhydrophobic materials with recyclable and self-cleaning properties on various substrates

Facile Formation of Hierarchical Textures for Flexible, Translucent, and Durable Superhydrophobic Film

Facile fabrication of flexible superhydrophobic surfaces with high durability and good mechanical strength through embedding silica nanoparticle into polymer substrate by spraying method

Eco-friendly waterborne superhydrophobic/superoleophilic FEVE composite coating with prolonged mechanochemical and anti-scaling properties

Robust Superhydrophobic Composite Fabric with Self-Healing and Chemical Durability

Facile preparation of pliable superamphiphobic papers with high and durable liquid repellency for anti-corrosion and open surface microfluidics

Eco-friendly fabrication of robust flexible superhydrophobic double-layer composite film by a blade coating method

Preparation of High Wear-Resisting Superamphiphobic Robust Film by Self-Assembled Monolayer Surface Reaction

Dip-Coating Approach to Fabricate Durable PDMS/STA/SiO2 Superhydrophobic Polyester Fabrics

Preparation of superhydrophobic coatings with excellent mechanical and chemical stability by one-step spraying method with selected fluorine-free modifiers

Flexible biomimetic materials with excellent photothermal performance and superhydrophobicity

Facile Fabrication of a Mechanical, Chemical, Thermal, and Long‐Term Outdoor Durable Fluorine‐Free Superhydrophobic Coating

Robust superhydrophobic silicone/epoxy functional coating with excellent chemical stability and self-cleaning ability

Preparation of a superhydrophobic TiN/PTFE composite film toward self-cleaning and corrosion protection applications

Robust interface-free superhydrophobic polymer-based composites with recoverable and anti-icing properties

Durable superhydrophobic PVDF/FEVE/GO@TiO2 composite coating with excellent anti-scaling and UV resistance properties

Free-standing, flexible, multifunctional, and environmentally stable superhydrophobic composite film made of self-assembled organic micro/super-nanostructures through solution process.