Abstract:Flexible superhydrophobic surfaces have been attracting more and more attention due to their foldable property. However, the superhydrophobic structure was easily damaged or destroyed owing to their poor interfacial force between substrate and superhydrophobic coating. Herein, fluorinated silica nanoparticles (F-SiO 2 ) were sprayed onto the wet poly(amide–imide) (PAI) surface, which made F-SiO 2 easily went into PAI substrate to enhance the durability of superhydrophobic surface. The PAI/F-SiO 2 flexible surface exhibited a water contact angle (CA) of beyond 160° and a sliding angle (SA) of as low as 3°, while the tensile strength (34 MPa) was comparable to that of PAI substrate (35.8 MPa). Encouragingly, the superhydrophobicity and hierarchical porous structure of PAI/F-SiO 2 surface were maintained even they were folded by 5000 times or underwent sandpaper abrasion test (500 cm of wear on a 1200 grit sandpaper under 50 g load), while the nanocomposites failed the sandpaper abrasion test when F-SiO 2 were sprayed onto completely dried PAI surface. More importantly, the CA and SA just slightly decreased when PAI/F-SiO 2 surfaces were heated at 300 °C for 24 h due to the unique surface morphology and high thermal stability of PAI, which is one of the highest thermal stabilities for flexible superhydrophobic films. In addition, PAI/F-SiO 2 surfaces maintained superhydrophobic after hot water jet impact, acid–base immersing, UV irradiation, and ultrasonic treatment, indicating the fabricated surfaces could be used for practical application especially under harsh conditions. Furthermore, the superhydrophobic surfaces possessed icephobic properties. It should be noted that PAI/F-SiO 2 surfaces showed such excellent properties, although their fabricating procedure did not undergo any optimization. This wet spraying method was also used to fabricate flexible superhydrophobic surfaces with other polymers as substrates such as poly(acrylic acid) (PAA), thermoplastic polyurethane (TPU), polystyrene (PS), and poly(vinyl alcohol) (PVA). Therefore, the simple strategy provided a general route to prepare flexible superhydrophobic films with high durability.

Facile preparation of pliable superamphiphobic papers with high and durable liquid repellency for anti-corrosion and open surface microfluidics

Design and Synthesis of a Robust and Multifunctional Superhydrophobic Coating with a Three-Dimensional Network Structure on a Paper-Based Material

Facile preparation of economical, eco-friendly superhydrophobic surface on paper substrate with excellent mechanical durability

Synergistic reinforced superhydrophobic paper with green, durability, and antifouling function

Facile fabrication of flexible superhydrophobic surfaces with high durability and good mechanical strength through embedding silica nanoparticle into polymer substrate by spraying method

A Waterborne Coating System for Preparing Robust, Self‐healing, Superamphiphobic Surfaces

An all-water-based system for robust superhydrophobic surfaces

Flexible biomimetic materials with excellent photothermal performance and superhydrophobicity

Fabrication of durable and sustainable superhydrophobic‐superoleophilic paper for efficient oil/water separation

Facile Preparation of Robust Superamphiphobic Coatings on Complex Substrates via Nonsolvent-Induced Phase Separation

A Simple Method For Preparing Superhydrophobic Self-Cleaning Paper By Spraying Nanoparticle Suspension

Spray-coated Superhydrophobic Surfaces with Wear-Resistance, Drag-Reduction and Anti-Corrosion Properties

Fabrication and research of superhydrophobic paper for oil-water separation

Sandpaper as template for a robust superhydrophobic surface with self-cleaning and anti-snow/icing performances

Fluorine-Free Dual Superamphiphobic Cellulose Paper Coated with Mushroom-like Pillar Microstructure

Robust and transparent superamphiphobic coating prepared via layer-by-layer spraying

Fabrication of durable polytetrafluoroethylene superhydrophobic materials with recyclable and self-cleaning properties on various substrates

Preparation of High Wear-Resisting Superamphiphobic Robust Film by Self-Assembled Monolayer Surface Reaction

Surface Modification of Paper by TiO2-PDMS-KH550 Coating with Superhydrophobic, Self-cleaning and Oil/Water Separating Properties

Facile fabrication of hierarchical textures for substrate-independent and durable superhydrophobic surfaces

Facile fabrication of pufferfish-like structured ZIF-8 on cellulose fibers with superhydrophobicity and anti-bacterial adhesion properties