Abstract:Poly(glycolic acid) is a biocompatible as well as biocomposable polymer with superior mechanical and barrier properties and, consequently, has found important applications in both medical and packaging fields. However, the high hydrolysis rate in a high humidity environment restricts its application. In this work, a solid-state drawing process after melt extrusion is applied in order to produce fibrous PGA with enhanced mechanical properties and a much better resistance towards hydrolysis. The crystal structure of PGA gradually transformed from spherulites into oriented fibrous crystals in the stretching direction upon solid-state drawing. Meanwhile, both the length of microfibril and the size of lamellae increased initially with the drawing ratio (DR), while the chain-folded lamellae transformed into extended-chain fibrils at high(er) DR. The oriented structures lead to an overall improvement of the mechanical properties of PGA, e.g. , the tensile strength increased from 62.0±1.4 MPa to 910±54 MPa and the elongation at break increased from around 7% to 50%. Meanwhile, the heat capacity of totally mobile amorphous PGA (∆ C p 0 =0.64 J·g −1 ·°C − 1 ) was reported for the first time, which was used to analyze the content of mobile amorphous fraction ( X MAF ) and rigid amorphous fraction ( X RAF ). Both the oriented chain-folded lamellae crystals and the tightly arranged RAF are beneficial to prevent water molecules from penetrating the matrix, thus improving the resistance towards hydrolysis. As a consequence, the fibrous PGA with a DR of 5 showed a tensile strength retention rate of 17.3% higher in comparison with the undrawn sample after 7-days accelerated hydrolysis. Therefore, this work provides a feasible method to improve the mechanical and resistance towards hydrolysis performance of PGA, which may broaden its application and prolong the shelf-life of PGA products.

High-performance and durable fibrous poly(glycolic acid)/poly(butylene adipate-co-terephthalate) blends by reactive compatibilization and solid-state drawing

Poly (l-lactide)/PEG-mb-PBAT blends with highly improved toughness and balanced performance

Poly(glycolic Acid) Materials with Melt Reaction/processing Temperature Window and Superior Performance Synthesized Via Melt Polycondensation

Poly(L-Lactide) Materials with Balanced Mechanical Properties Prepared by Blending with Peg-Mb-Ppa Multiblock Copolymers

Superior toughened bio-compostable Poly(glycolic acid)-based blends with enhanced melt strength via selective interfacial localization of in-situ grafted copolymers

Superior ductile poly(glycolic acid)/poly(butylene adipate-co-terephthalate) blends compatibilized by triphenyl phosphite

Drawing Temperature-Dependent Mechanical Properties of Poly(glycolic acid)/Poly(butylene adipate- co -terephthalate) Films

Improvement on the Mechanical Performance and Resistance Towards Hydrolysis of Poly(glycolic acid) via Solid-state Drawing

Preparation of rigidity toughness balance and stable poly(glycolic acid) based on chain extension reaction

Preparation and Properties of Poly(ethylene glycol-co-cyclohexane-1,4-dimethanol terephthalate)/Polyglycolic Acid (PETG/PGA) Blends

Improving the compatibility and toughness of sustainable polylactide/poly(butylene adipate-co-terephthalate) blends by incorporation of peroxide and diacrylate

Highly toughened poly (lactic acid)/poly (butylene adipate-terephthalate) blends in-situ compatibilized by MMA-co-GMA copolymers with different epoxy group content

In Situ Formation of Microfibrillar PBAT in PGA Films: An Effective Way to Robust Barrier and Mechanical Properties for Fully Biodegradable Packaging Films

Super Toughened PLLA/PBAT Blends with Modified Phase Interface Via Constructing Cocontinuous Structure with the Aid of Stereocomplex Crystallites Toward Preparation of a Fully Degradable Material

A Novel Biobased High Toughness PBAT/PEF Blends: Morphology, Thermal Properties, Crystal Structure and Mechanical Properties

Improvement of melt viscosity and compatibility of polyglycolic acid (PGA)/polylactic acid (PLA) blend via reactive blending with bifunctional and multifunctional hybrid chain extender

Influence of Modified Poly(Glycolic acid) on the Physical and Mechanical Properties of PLA/PBAT/mPGA Multi-phase Blends

Design of biodegradable PLA/PBAT blends with balanced toughness and strength via interfacial compatibilization and dynamic vulcanization

Super-toughed polylactide/poly (butylene adipate-co-terephthalate) blends in-situ compatibilized by poly (glycidyl methacrylate) with different molecular weight

Synthesis of Poly(butylene adipate terephthalate)- co -poly(glycolic acid) with Enhanced Degradability in Water

Stable nanoscale sea-island structure of biobased polyamide 56/poly (butylene adipate- co -terephthalate) blends compatibilized by interfacial hyperbranched structure: Toward biobased polymer blends with ultrahigh toughness