Abstract:Flow electrode capacitive deionization (FCDI) is a highly promising desalination technique known for its exceptional electrosorption capacity, making it suitable for efficient salt separation in high salinity water. However, the unsatisfactory charge transfer process between the flow electrode and current collector severely curtails the salt separation and enrichment performance of the FCDI device. To address this issue, three-dimensional titanium mesh (3D-TM) was proposed as a novel current collector for FCDI device, which significantly amplifies the charge transfer area and exhibits excellent salt separation performance. The 3D-TM current collector promotes the electron transfer, charge percolation, and ion migration processes through the electroconvection generated by the turbulence effect on the flow electrode. In the specific case of the 20-mesh 3D-TM, which is composed of 12 stacking layers of titanium mesh, the remarkable average salt removal rate and charge efficiency were achieved 5.06 μmol cm −2 min −1 and 92.9 % under an appropriate applied voltage of 2.0 V, respectively. Dramatically, the desalination performance maintained above 76.4 % over 100 desalination cycles at 2.0 V, demonstrating the exceptional cyclic stability of the 3D-TM FCDI cell. In the seawater desalination, the 3D-TM FCDI cell exhibited an impressive salt removal efficiency of 97.5 % (from 34.2 g L − 1 to 0.84 g L − 1 ) for 1 L East China seawater at 2.0 V for 24 h. For lithium-ion enrichment, the FCDI continuous desalting system achieved an astonishing concentration of 17.3 g L − 1 for Li + ions enrichment from an initial concentration of 1.30 g L − 1 , obtaining the average salt treating rate of 23.6 g m − 2 h − 1 and charge efficiency of 80.0 %. Moreover, the lithium-sodium ions and lithium-magnesium ions enrichments were both conducted, yielding an enriched concentration of 10.4 g L − 1 and 7.30 g L − 1 for Li + ions, respectively. These findings highlight the enormous potential of FCDI technology in industrial engineering applications, further establishing it as a highly viable solution.

Separation of Mono‐/Divalent Ions via Controlled Dynamic Adsorption/Desorption at Polythiophene Coated Carbon Surface with Flow‐Electrode Capacitive Deionization

Cation selectivity during flow electrode capacitive deionization

Anion-kinetics-selective Graphene Anode and Cation-Energy-selective MXene Cathode for High-Performance Capacitive Deionization

Enhanced Charge Efficiency and Electrode Separation Utilizing Magnetic Carbon in Flow Electrode Capacitive Deionization

Capacitive deionization incorporating a fluidic MOF-CNT electrode for the high selective extraction of lithium

A dynamic intercalation mechanism in pre-intercalation carbon nanosheets for capacitive deionization cells

A chemically tailored capacitive deionization system for the enhanced removal of cesium from process water

Battery Electrode Materials with Omnivalent Cation Storage for Fast and Charge-Efficient Ion Removal of Asymmetric Capacitive Deionization

Redox flow deionization using Prussian blue and functionalized ion exchange membrane for enhanced selective ion recovery

Enhanced desalination performances by using porous polyaniline-activated carbon composite flow-electrodes in capacitive deionization system

Hierarchical nickel cobaltite nanoneedle arrays armored flexible electrospinning carbon nanofibers membrane for electrochemical deionization

Flexible ultrathin Nitrogen-Doped carbon mediates the surface charge redistribution of a hierarchical tin disulfide nanoflake electrode for efficient capacitive deionization

Polyethylene glycol-polyvinylidene fluoride/TiO2 nanocomposite polymer coatings with efficient antifouling strategies: Hydrophilized defensive surface and stable capacitive deionization

Selective Lithium separation from Li/Co/Ni mixtures using optimized flow-electrode capacitive deionization

Three-dimensional titanium mesh-based flow electrode capacitive deionization for salt separation and enrichment in high salinity water

Multiscale MXene Engineering for Enhanced Capacitive Deionization via Adaptive Surface Charge Tailoring

Selection and optimization of carbon-based electrode materials for flow-electrode capacitive deionization

Flexible construction of three-dimensional continuous conductive structure by hollow carbon sphere and CNT for promoted ions transport in flow-electrode capacitive deionization

Effective removal and selective capture of copper from salty solution in flow electrode capacitive deionization

Electro-adsorption of Cs(I) Ions from Aqueous Solution by Capacitive Deionization Using ACC/MoO3 Composite Electrode

Flow-electrode Capacitive Separation of Organic Acid Products and Recovery of Alkali Cations after Acidic CO 2 Electrolysis