Abstract:The conceptual design and optimization of supercritical water gasification (SCWG) for poly-generation are performed in the viewpoint of the thermodynamic analysis and economic assessment, which can promote the industrial application. Assuming a high concentration slurry feed and proposing complicated process design in the current research reduce the possibility of practical application, and also fails to ensure the efficient energy output. In this study, a SCWG process scheme was designed specifically for a pulping modification process, coupling with a multistage reactor configuration and gradient heat transfer configuration. The optimal process conditions were explored by investigating the effects of water diversion, feed concentration, and in-situ hydrogen separation rate (ISHS) on the energy output of the SCWG system, as well as analyzing the energy distribution and exergy losses. In order to maximize the energy output by making full use of waste heat, the exergy losses and energy efficiency of the SCWG poly-generation of hydrogen-electricity (PGHE) and poly-generation of hydrogen-heat (PGHH) systems were compared to investigate the suitable poly-generation process. The suitable SCWG poly-generation process scheme was verified to have low carbon emission and energy cost by evaluating the environmental impact of the system over its life cycle and its levelized cost of energy (LCOE). It was shown that increasing the feed concentration and ISHS rate, and reducing the amount of water diversion can improve the energy and exergy efficiencies. The optimum hydrogen production, energy efficiency and exergy efficiency of the SCWG system were 1651.44 kg/h, 47.58 % and 48.87 %, respectively, for a feed concentration of 50 wt%, an ISHS rate of 40 %, a preheat water ratio of 4, and a water diversion of 1. The exergy loss is mainly concentrated in the oxidation reactor and cooling unit, and the waste heat utilization coupled with ISHS can reduce significantly the exergy loss in the cooling unit and improve the energy efficiency and exergy efficiency of the system. PGHH has a greater impact on energy yield than PGHE, and at an ISHS rate of 40 %, the exergy loss of the system is reduced to 69800.48 kW, and the energy efficiency and exergy efficiency are increased to 73.34 % and 72.38 %, respectively. Meanwhile, under the condition of PGHH, coupling with an ISHS rate of 40 % and carbon capture and storage can minimize the environmental impact of the system, with a global warming potential of 5.03 kg CO2-eq. The LCOE of SCWG system coupled with PGHH is as low as 0.696 CNY/kWh. The completion of the study can accelerate the industrial application of the SCWG poly-generation project with conceptual design and theoretical guidance.

Insight into the interconversion mechanisms during the supercritical water gasification of bark

Experimental Investigation on Biomass Gasification Mechanism in Supercritical Water for Poly-Generation of Hydrogen-Rich Gas and Biochar

Study on Gasification Mechanism of Biomass Waste in Supercritical Water Based on Product Distribution

Hydrogen Production by Supercritical Water Gasification of Biomass: Explore the Way to Maximum Hydrogen Yield and High Carbon Gasification Efficiency

Experiment evaluation and thermodynamic analysis of pulping modification on ordered conversion of bark in supercritical water

Study on mechanism of supercritical water gasification of hemicellulose for hydrogen-rich syngas based on experiments and reaction molecular dynamics simulations

Supercritical Water Gasification of Wheat Straw: Composition of Reaction Products and Kinetic Study

Energy, Exergy, Environmental, and Economic Evaluation and Conceptual Design of Supercritical Water Gasification of Bark Integrated with Poly-Generation

Mechanism of supercritical water gasification of corn stover for hydrogen-rich syngas: Composition of reaction products

CFD Modeling of Sawdust Gasification in a Lab-Scale Entrained Flow Reactor Based on Char Intrinsic Kinetics. Part 2: Parameter Study and Multi-Objective Optimization

Interfacial Surface Investigation of Super-Critical Water Gasification of Corn Cob

Clean treatment and resource utilization of oilfield wastewater using supercritical water gasification

Cascading disposal for food waste by integration of hydrothermal carbonization and supercritical water gasification

Molecular Dynamic Simulation of Hydrogen Production by Catalytic Gasification of Key Intermediates of Biomass in Supercritical Water

Experimental investigation on organic functional groups evolution in hydrogen production process by coal gasification in supercritical water

Enhancement of Depolymerization Slag Gasification in Supercritical Water and Its Gasification Performance in Fluidized Bed Reactor

Supercritical Water Gasification of Food Waste: Effect of Parameters on Hydrogen Production

Characteristic of Food Waste Gasification in Supercritical Water for Hydrogen Production

Hydrogen Production from Glucose Used As a Model Compound of Biomass Gasified in Supercritical Water

Supercritical water Co-gasification of biomass and plastic wastes for hydrogen-rich gas production using Ni-Cu/AC-CaO catalyst

Thermodynamic and Environmental Analysis of Two-Stage Series Supercritical Water Gasificationof Biomass for Hydrogen Production