Abstract:In this study, we proposed a high-throughput separation strategy of the binary colloid mixture by dielectrophoresis (DEP) induced around large-scale bipolar electrode arrays embedded in microfabricated fluidic networks via a thorough numerical investigation. The usage of a floating electrode (FE) eliminates the need of external Ohmic connection to individual array units, therefore potentially steering the faddish design of new microdevice structures. Diffuse charge dynamics within the induced double layer at opposite ends of every FE permit a sinusoidal electric field to penetrate throughout the whole device, as long as the imposed field frequency is beyond the reciprocal resistor-capacitor time constant at the electrode/electrolyte interface. In this special device configuration, FEs interconnect multiple microchannels arranged in parallel. Pockets embedded on the sidewalls of fluidic channels help create strong field gradients at the tip of FEs and sharp pocket/channel junctions, improving the trapping performance of incoming bioparticles subjected to positive-DEP (pDEP) force, while latex beads experiencing negative-DEP (nDEP) stress are electrically squeezed to the midchannel and finally exit as a series of co-flowing thin streams with unequal translatory velocity. Taking the synergy of DEP force, induced-charge electro-osmosis, alternating-current electrothermal streaming, pressure-driven flow, and buoyancy effect into consideration, a numerical model is established to account for motion trajectories of micro-entities in full-scale three-dimensional space using the Lagrange particle track algorithm, as well as testing the feasibility of the device design in separation of the binary mixture containing yeast cells and polystyrene beads. Applying suitable voltage parameters of frequency O(1) MHz and electric field strength O(10) V/mm, highly efficient DEP separation is theoretically achievable under inlet flow velocity on the order of O(1) mm/s, where most of incoming yeasts are captured by pDEP within these five parallel branching channels, while polystyrene spheres are repelled by nDEP away from the FE array to form slim beams co-flowing into the outlet according to the calculation results. The microfluidic separation device exploiting the FE array offers great potential to build up scalable electrokinetic platforms for high-throughput on-chip sample treatment.

High-Throughput Continuous Free-Flow Dielectrophoretic Trapping of Micron-Scale Particles and Cells in Paper Using Localized Nonuniform Pore-Scale-Generated Paper-Based Electric Field Gradients

Recent Advances in Dielectrophoretic Manipulation and Separation of Microparticles and Biological Cells

Continuous Dielectrophoretic Particle Separation Using A Microfluidic Device with 3d Electrodes and Vaulted Obstacles

Dielectrophoretic separation of micron and submicron particles: a review

Cell Trapping Utilizing Insulator-based Dielectrophoresis in The Open-Top Microchannels

High‐throughput Dielectrophoretic Manipulation of Bioparticles Within Fluids Through Biocompatible Three‐dimensional Microelectrode Array

Semi-continuous dielectrophoretic separation at high throughput using printed circuit boards

Simple, Cost-Effective, and Continuous 3D Dielectrophoretic Microchip for Concentration and Separation of Bioparticles

Numerical Study of A Dielectrophoresis Separation Device at Multiple Frequencies

Dielectrophoretic Separation and Transportation of Cells and Bioparticles on Microfabriacted Chips

Tunable membrane-less dielectrophoretic microfiltration by crossing interdigitated electrodes

Trapping of a Single Microparticle using AC Dielectrophoresis Forces in a Microfluidic Chip

Dielectrophoretic Assembly and Separation of Particles and Cells in Continuous Flow

Dielectrophoretic Separation with a Floating-Electrode Array Embedded in Microfabricated Fluidic Networks

Numerical Simulations of Combined Dielectrophoresis and Alternating Current Electrothermal Flow for High-Efficient Separation of (Bio)Microparticles

Screen-printed microfluidic dielectrophoresis chip for cell separation

Effective Cell and Particle Sorting and Separation in Screen-Printed Continuous-Flow Microfluidic Devices with 3d Sidewall Electrodes

Continuous Particle Separation Driven by 3D Ag-PDMS Electrodes with Dielectric Electrophoretic Force Coupled with Inertia Force

Fabrication of Dielectrophoretic Microfluidic Chips Using a Facile Screen-Printing Technique for Microparticle Trapping

Continuous Separation of Multiple Size Microparticles Using Alternating Current Dielectrophoresis in Microfluidic Device with Acupuncture Needle Electrodes

A 3-D Microelectrode System For Dielectrophoretic Manipulation Of Microparticles