Abstract:Shape memory polymers (SMPs) have a wide range of potential applications in many fields. In particular, electrically driven SMPs have attracted increasing attention due to their unique electrical deformation behaviors. Carbon nanotubes (CNTs) are often used as SMP conductive fillers because of their excellent electrical conductivities. However, raw CNTs do not disperse into the polymer matrix well. This strictly limits their use. In this study, to improve their dispersion performance characteristics in the polymer matrix, hydroxylated multi-walled carbon nanotubes (MWCNT-OHs) were functionalized with octadecyl isocyanate (i-MWCNTs). Polyurethane with shape memory properties (SMPU) was synthesized using polycaprolactone diol (PCL-diol), hexamethylene diisocyanate (HDI), and 1,4-butanediol (BDO) at a 1:5:4 ratio. Then, electroactive shape memory composites were developed by blending SMPU with i-MWCNTs to produce SMPU/i-MWCNTs. The functionalized i-MWCNTs exhibited better dispersibility characteristics in organic solvents and SMPU composites than the MWCNT-OHs. The addition of i-MWCNTs reduced the crystallinity of SMPU without affecting the original chemical structure. In addition, the hydrogen bond index and melting temperature of the SMPU soft segment decreased significantly, and the thermal decomposition temperatures of the composites increased. The SMPU/i-MWCNT composites exhibited conductivity when the i-MWCNT content was 0.5 wt%. This conductivity increased with the i-MWCNT content. In addition, when the i-MWCNT content exceeded 1 wt%, the composite temperature could increase beyond 60°C within 140 s and the temporary structure could be restored to its initial state within 120 s using a voltage of 30 eV. Therefore, the functionalized CNTs exhibit excellent potential for use in the development of electroactive shape memory composites, which may be used in flexible electronics and other fields.

Application of interpolated double network model for carbon nanotube composites in electrothermal shape memory behaviors

Mechanisms of Multi-Shape Memory Effects and Associated Energy Release in Shape Memory Polymers

Mechanical and Shape Recovery Properties of Shape Memory Polymer Composite Embedded with Cup-Stacked Carbon Nanotubes

Modeling the Glass Transition of Amorphous Networks for Shape-Memory Behavior

Stability of dielectric elastomer/carbon nanotube composites coupling electrostriction and polarization

A Molecular Dynamics Investigation of the Deformation Mechanism and Shape Memory Effect of Epoxy Shape Memory Polymers

Electrothermal Simulation of Single-Walled Carbon Nanotube (Swcnt)-Based Phase Change Memory for 3-Dics

Constrained Shape-Memory Behaviors of Multiple Network Elastomers

Molecular dynamics simulations of thermodynamics and shape memory effect in CNT-epoxy nanocomposites

Carbon Fiber Reinforced Shape Memory Epoxy Composites with Superior Mechanical Performances

Shape Memory Nanocomposite and Its Application

A Hygro-Thermo-mechanical Constitutive Model for Shape Memory Polymers Filled with Nano-Carbon Powder

Shape memory polymer nanocomposites with carbon nanofiber paper

A multi-scale thermodynamic model incorporated with a single stress relaxation mechanism for polymer-based shape memory nanocomposites

Mechanical behavior of thermally-induced shape memory polymer composites thin-wall tube in non-uniform thermal field: Experiments and simulations

Electroactive shape memory polyurethane composites reinforced with octadecyl isocyanate-functionalized multi-walled carbon nanotubes

A Mechanism-Based Four-Chain Constitutive Model for Enthalpy-Driven Thermoset Shape Memory Polymers With Finite Deformation

A thermo-mechanical constitutive model for triple-shape and two-way shape memory polymers

Modeling and simulation of nonlinear electro-thermo-mechanical continua with application to shape memory polymeric medical devices

Electroactivate Shape-Memory Polymer Filled With Nanocarbon Particles And Short Carbon Fibers

Electro-activate Styrene-Based Shape Memory Polymer Nanocomposite Filled with Multi-Walled Carbon Nanotubes