Effectiveness of biofilm scouring in improving the carbon and nitrogen removal performance of membrane-aerated biofilm reactors installing novel high oxygen-transfer polyethylene membranes

Hiroto Miura,Yunje Kigo,Akihiko Terada
DOI: https://doi.org/10.1016/j.jwpe.2024.104880
IF: 7
2024-02-16
Journal of Water Process Engineering
Abstract:In this study, we investigated the applicability of a novel non-porous low-density polyethylene (NP-LDPE) membrane in membrane-aerated biofilm reactors (MABRs) and the effects of the biofilm detachment intensity on the organic carbon and nitrogen removal performance. Three laboratory-scale MABRs with NP-LDPE membranes were continuously fed with synthetic wastewater for 420 days to evaluate the carbon and nitrogen removal rates, nitrous oxide (N 2 O) emission factors, and effectiveness of the biofilm detachment procedure. The oxygen transfer rate of the NP-LDPE membrane ranged from 15.7 to 27.3 g-O 2 /m 2 /day at air pressures of 20 to 50 kPa, which are comparable with those of commercial membranes. The maximum specific dissolved organic carbon and NH 4 + removal rates were 2.23 ± 0.55 g-C/m 2 /day and 0.41 ± 0.15 g-N/m 2 /day, respectively. The N 2 O emission factor reached the maximum (0.31 %) during operation with scouring for biofilm detachment. However, the N 2 O emission factors in regular operation were much lower. The recovery after deterioration of the dissolved organic carbon and NH 4 + removal efficiencies owing to excessive biofilm formation was contingent upon the biofilm detachment procedure. More intense biofilm detachment procedures were required to recover the NH 4 + removal efficiencies. Biofilm detachment allowed increases of the functional gene copies for ammonia oxidation (bacterial amoA ) and N 2 O reduction (clade I and clade II nosZ ) at the biofilm interior and exterior, respectively. The transcripts of the clade I and clade II nosZ genes concomitantly increased, indicating that the detachment procedure potentially enhanced the activity of the N 2 O reducers.
engineering, chemical, environmental,water resources
What problem does this paper attempt to address?