Deep learning model to predict complex stress and strain fields in hierarchical composites

Zhenze Yang,Chi-Hua Yu,Markus J. Buehler

DOI: https://doi.org/10.1126/sciadv.abd7416

IF: 13.6

2021-04-09

Science Advances

Abstract:Deep learning predicts mechanical fields in hierarchical composites, as an alternative to conventional numerical methods.

multidisciplinary sciences

What problem does this paper attempt to address?

End-to-end deep learning method to predict complete strain and stress tensors for complex hierarchical composite microstructures

Zhenze Yang,Chi-Hua Yu,Kai Guo,Markus J. Buehler

DOI: https://doi.org/10.1016/j.jmps.2021.104506

IF: 5.582

2021-09-01

Journal of the Mechanics and Physics of Solids

Abstract:<p>Due to the high demand for materials with superior mechanical properties and diverse functions, designing composite materials is an integral part in materials development. However, due to the heterogeneity and complexity of composites, measurements of properties and designs of optimal structures are often experimentally or computationally intractable. Here we report complete strain and stress tensors predictions given input composite geometries of composites, based on a deep learning approach. The model not only predicts all strain and stress tensor components accurately, but also observes rigorous continuum mechanical principles. Furthermore, through tuning data statistics, the model performance is enhanced even with a small amount of data in terms of handling material microstructures with varying constituent ratios and hierarchical geometries. The method vastly improves the efficiency of predicting comprehensive mechanical behaviors of composite materials and provides a powerful tool for design problems such as multifunctional composites design and hierarchical structures optimization.</p>

mechanics,materials science, multidisciplinary,physics, condensed matter
Prediction Model of Residual Load-Bearing Capacity of Composite Laminates Using Deep Learning

Pengfei Liu,Dehong Xu

DOI: https://doi.org/10.1016/b978-0-323-88652-9.00002-9

2023-01-01

Abstract:A damage prognosis model of the remaining load-bearing capacity of composite materials and a mechanical state estimation model are established based on acoustic emission (AE) signals. The AE tests of end-notched flexure composite laminates under three-point bending are performed. The training datasets are expanded by using the multiview perspectives of AE sensors, and an AE feature evaluation method is established based on the RReliefF and the neighborhood component analysis (NCA). A model for predicting the remaining load-bearing capacity is constructed based on the convolutional neural network, and the effect of an important hyperparameter in the model, i.e., the length of time window, on the prediction results is investigated. A method for estimating the damage state of composite materials is developed based on the modified Mel-frequency cepstral analysis and the features sensitive to damage accumulation are extracted. A simple method is proposed for estimating the mechanical state of the specimen based on the extracted features and statistical methods. The feasibility of the estimation model is verified by the artificially excited acoustic sources.
Image driven deep learning method with FFT solver for predicting the microscale full field stress of stochastic boundary composites

Yong Liao,Bing Wang,Hongyue Wang,Songhe Meng,Guodong Fang

DOI: https://doi.org/10.1002/pc.28614

IF: 5.2

2024-05-31

Polymer Composites

Abstract:Rapid prediction of mechanical properties of composites. A novel image‐driven deep learning approach embedded with model‐data‐knowledge information can directly predict the full field stress distribution and mechanical properties of composites solely based on initial scanning geometry images. The fiber spatial distribution and morphological features are identified by Scanning Electron Microscopy (SEM) initially. An effective random fiber generation algorithm is further utilized to generate images database comprising equivalent geometric models of various microstructures. Subsequently, the geometry model images database is analyzed by fast Fourier transform (FFT) to produce the database including the elastic modulus parameters and full field stress distributions of composites with distinct microstructures. Finally, an innovative image‐learning comprehensive paradigm uniting convolutional neural networks and convolutional autoencoders is elaborated systematically to learn the inherent laws of geometry images and field images. The results show that the proposed method have capacity to effectively and accurately predict the elastic modulus and full field stress distributions combined with error analysis even for stochastic boundary composites. The proposed methodology is a symbiosis of cutting‐edge image learning and non‐destructive testing techniques for composites, which can directly use the local non‐destructive or scanning images of composite structural components to quickly obtain field information and further predict damage evolution online. Highlights Proposing a novel deep learning approach combined with FFT directly to predict stress distribution of stochastic boundary composites solely based on micro‐images. Adopting equivalent geometric models dispersed by higher pixels mesh density considering extreme thin interface. Incorporate adaptive algorithms for streamlined training optimization. An innovative integration of deep learning and non‐destructive testing technology for the stress distribution and properties prediction online.

materials science, composites,polymer science
Prediction of Complex Strain Fields in Concrete Using a Deep Learning Approach

Pujin Wang,Jianzhuang Xiao,Chang Sun,Xu Wu,Long Li,Kequan Yu

DOI: https://doi.org/10.1016/j.conbuildmat.2023.133257

IF: 7.4

2023-01-01

Construction and Building Materials

Abstract:Stress-strain analysis is pivotal in high-performance concrete composite design, which has traditionally relied on experiments and numerical simulations. However, these approaches are inefficient due to the astronomical number of possible combinations. This paper thus proposes a high-efficient surrogate model utilizing generative deep learning (DL) for complex strain field prediction to address this research topic. A dataset containing 2000 samples with randomly distributed geometries and corresponding strain fields is built as ground truth. A DL model is constructed, trained, and validated to capture the intricate geometry-strain relationships within the dataset. The predictions to material properties demonstrate astonishing accuracies of 0.54% MAPE in strain fields and of 0.96 R2 in deformability ranking. Furthermore, the proposed approach offers remarkable adaptability and extensibility to varied geometries and failure modes, supported by real-world tests. This method significantly enhances the efficiency of evaluating concrete physical properties by leveraging the geometry for direct strain field analysis.
Predicting the temperature field of composite materials under a heat source using deep learning

Sen Yang,Wen Yao,Lin-Feng Zhu,Liao-Liang Ke

DOI: https://doi.org/10.1016/j.compstruct.2023.117320

IF: 6.3

2023-07-10

Composite Structures

Abstract:Composite materials have different effective material properties with different combinations of material components. However, as the number of all possible combinations is astronomical, it appears complex to establish a clear relationship between the temperature field and layout of composite materials under the heat source. Traditional methods, like the finite element method (FEM) and finite difference method , can be time-consuming and costly for such a large task. To overcome these problems, a deep learning (DL) based surrogate model is developed by mapping the composite layout to temperature field as an image-to-image regression task. This surrogate model can accurately predict the temperature field and its ranking for a two-phase composite under a heat source. Furthermore, we discuss the effect of data size on the surrogate model, and extend the surrogate model to different cases which still achieve good prediction results. The proposed surrogate model can significantly reduce time consumption, and accurately predict the temperature fields of composite materials with arbitrary layouts.

mechanics,materials science, composites
Full-field prediction of stress and fracture patterns in composites using deep learning and self-attention

Yang Chen,Tim Dodwell,Tomas Chuaqui,Richard Butler

DOI: https://doi.org/10.1016/j.engfracmech.2023.109314

IF: 5.4

2023-05-05

Engineering Fracture Mechanics

Abstract:An efficient surrogate modelling framework is proposed for full-field predictions of stresses and cracks in composite material microstructures. The framework comprises two sequential convolutional neural networks (CNNs), predicting the elastic stress fields and the local crack maps, respectively. Training and test data are created from high-resolution fracture simulations of randomly generated representative volume elements (RVEs), including geometric variabilities such as fibre volume fraction and porosity. This work shows that the inclusion of a self-attention layer within the network enables the model to capture relevant local and global features, which are important in determining the heterogeneous stress distribution and crack patterns. The performance of the trained CNN models is evaluated with unseen data. The CNN models speed up the full-field predictions by 3∼4 orders of magnitude compared to the physics-based model. The surrogate model's accuracy and efficiency are key enables for applications such as multiscale simulation, microstructure optimisation and uncertainty quantification.

mechanics
Prediction of local elasto-plastic stress and strain fields in a two-phase composite microstructure using a deep convolutional neural network

Indrashish Saha,Ashwini Gupta,Lori Graham-Brady

2023-10-30

Abstract:Design and analysis of inelastic materials requires prediction of physical responses that evolve under loading. Numerical simulation of such behavior using finite element (FE) approaches can call for significant time and computational effort. To address this challenge, this paper demonstrates a deep learning (DL) framework that is capable of predicting micro-scale elasto-plastic strains and stresses in a two-phase medium, at a much greater speed than traditional FE simulations. The proposed framework uses a deep convolutional neural network (CNN), specifically a U-Net architecture with 3D operations, to map the composite microstructure to the corresponding stress and strain fields under a predetermined load path. In particular, the model is applied to a two-phase fiber reinforced plastic (FRP) composite microstructure subjected to a given loading-unloading path, predicting the corresponding stress and strain fields at discrete intermediate load steps. A novel two-step training approach provides more accurate predictions of stress, by first training the model to predict strain fields and then using those strain fields as input to the model that predicts the stress fields. This efficient data-driven approach enables accurate prediction of physical fields in inelastic materials, based solely on microstructure images and loading information.

Materials Science,Computational Physics
Predicting composite microstructure from deformation data using deep learning

Aijun Gu,Sheng Sang

DOI: https://doi.org/10.1063/5.0223033

IF: 1.697

2024-07-01

AIP Advances

Abstract:Predicting the microstructure of composite plates based on deformation data under static loads is crucial for advanced materials design and optimization. This study utilizes finite element simulations to generate deformation data, capturing the complex mechanical behavior of composite materials under static loading conditions. We developed a deep learning model based on a multi-layer perceptron (MLP) architecture to predict the microstructure of these composite plates from the simulated deformation data. The model is trained on a dataset comprising diverse microstructural patterns and their corresponding deformation responses. Our results demonstrate the MLP’s capability to accurately infer microstructural details, highlighting the potential of deep learning in materials science. This approach not only enhances the understanding of the relationship between deformation and microstructure but also provides a robust framework for designing composite materials with desired properties through computational methods.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology
Deep neural network method for predicting the mechanical properties of composites

Sang Ye,Bo Li,Qunyang Li,Hong-Ping Zhao,Xi-Qiao Feng

DOI: https://doi.org/10.1063/1.5124529

IF: 4

2019-10-14

Applied Physics Letters

Abstract:Determining the macroscopic mechanical properties of composites with complex microstructures is a key issue in many of their applications. In this Letter, a machine learning-based approach is proposed to predict the effective elastic properties of composites with arbitrary shapes and distributions of inclusions. Using several data sets generated from the finite element method, a convolutional neural network method is developed to predict the effective Young's modulus and Poisson's ratio of composites directly from a window of their microstructural image. Through numerical experiments, we demonstrate that the trained network can efficiently provide an accurate mapping between the effective mechanical property and the microstructures of composites with complex structures. This study paves a way for characterizing heterogeneous materials in big data-driven material design.

physics, applied
Deep learning prediction of stress fields in additively manufactured metals with intricate defect networks

Brendan P. Croom,Michael Berkson,Robert K. Mueller,Michael Presley,Steven Storck

DOI: https://doi.org/10.48550/arXiv.2105.10564

2021-05-22

Abstract:In context of the universal presence of defects in additively manufactured (AM) metals, efficient computational tools are required to rapidly screen AM microstructures for mechanical integrity. To this end, a deep learning approach is used to predict the elastic stress fields in images of defect-containing metal microstructures. A large dataset consisting of the stress response of 100,000 random microstructure images is generated using high-resolution Fast Fourier Transform-based finite element (FFT-FE) calculations, which is then used to train a modified U-Net style convolutional neural network (CNN) model. The trained U-Net model more accurately predicted the stress response compared to alternative CNN architectures, exceeded the accuracy of low-resolution FFT-FE calculations, and was generalizable to microstructures with complex defect geometries. The model was applied to images of real AM microstructures with severe lack of fusion defects, and predicted a strong linear increase of maximum stress as a function of pore fraction. Together, the proposed CNN offers an efficient and accurate way to predict the structural response of defect-containing AM microstructures.

Materials Science
Deep Learning on Atomistic Physical Fields of Graphene for Strain and Defect Engineering

Jian Chang,Shuze Zhu

DOI: https://doi.org/10.1002/aisy.202300601

IF: 7.298

2024-01-01

Advanced Intelligent Systems

Abstract:Strain and defect engineering have profound applications in two‐dimensional materials, where it is important to determine the equilibrated atomistic structures with defect conditions under mechanical deformations for computational materials design. Nevertheless, how to efficiently predict relaxed atomistic structures and the associated physical fields on each atom or bond under evolving mechanical deformations remains as an essential challenge. To address this issue, a deep neural network architecture is designed to embed the state of applied strains into the defect‐engineered atomistic geometry, so that deformation‐coupled physical fields of interests on atoms or bonds can be predicted or derived over continuous state of deformations. For demonstration, the combination of applied tensile strains and shear strain on monolayer graphene with random distribution of Stone–Wales defects and vacancy defects is considered. The unique advantage of this framework is the development of strain‐embedding concept combined with generative adversarial network, which can be feasibly extended to other material and other conditions. The computational approach sheds light on boosting the efficiency of evaluating physical properties of 2D materials under complex strain and defect states.
Neuro-DynaStress: Predicting Dynamic Stress Distributions in Structural Components

Hamed Bolandi,Gautam Sreekumar,Xuyang Li,Nizar Lajnef,Vishnu Naresh Boddeti

DOI: https://doi.org/10.48550/arXiv.2301.02580

2022-12-19

Abstract:Structural components are typically exposed to dynamic loading, such as earthquakes, wind, and explosions. Structural engineers should be able to conduct real-time analysis in the aftermath or during extreme disaster events requiring immediate corrections to avoid fatal failures. As a result, it is crucial to predict dynamic stress distributions during highly disruptive events in real-time. Currently available high-fidelity methods, such as Finite Element Models (FEMs), suffer from their inherent high complexity and are computationally prohibitive. Therefore, to reduce computational cost while preserving accuracy, a deep learning model, Neuro-DynaStress, is proposed to predict the entire sequence of stress distribution based on finite element simulations using a partial differential equation (PDE) solver. The model was designed and trained to use the geometry, boundary conditions and sequence of loads as input and predict the sequences of high-resolution stress contours. The performance of the proposed framework is compared to finite element simulations using a PDE solver.

Geophysics,Computational Engineering, Finance, and Science,Machine Learning
Difference-Based Deep Learning Framework for Stress Predictions in Heterogeneous Media

Haotian Feng,Pavana Prabhakar

DOI: https://doi.org/10.1016/j.compstruct.2021.113957

2021-03-29

Abstract:Stress analysis of heterogeneous media, like composite materials, using Finite Element Analysis (FEA) has become commonplace in design and analysis. However, determining stress distributions in heterogeneous media using FEA can be computationally expensive in situations like optimization and multi-scaling. To address this, we utilize Deep Learning for developing a set of novel Difference-based Neural Network (DiNN) frameworks based on engineering and statistics knowledge to determine stress distribution in heterogeneous media, for the first time, with special focus on discontinuous domains that manifest high stress concentrations. The novelty of our approach is that instead of directly using several FEA model geometries and stresses as inputs for training a Neural Network, as typically done previously, we focus on highlighting the differences in stress distribution between different input samples for improving the accuracy of prediction in heterogeneous media. We evaluate the performance of DiNN frameworks by considering different types of geometric models that are commonly used in the analysis of composite materials, including volume fraction and spatial randomness. Results show that the DiNN structures significantly enhance the accuracy of stress prediction compared to existing structures, especially for composite models with random volume fraction when localized high stress concentrations are present.

Applied Physics,Materials Science,Machine Learning
A three-dimensional prediction method of stiffness properties of composites based on deep learning

Hao Su,TianYuan Guan,Yan Liu

DOI: https://doi.org/10.1007/s00466-022-02253-z

IF: 4.391

2022-12-24

Computational Mechanics

Abstract:It is significant to determine the macroscopic mechanical properties of composite materials with complex microstructure efficiently and accurately in many fields. We propose a deep learning method based on three-dimensional convolutional neural network (3D CNN) to predict the elastic coefficients of composite materials with inclusions of arbitrary sizes, shapes and material parameters. 3D datasets are generated, and a storage algorithm is proposed to reduce great storage costs in 3D. A general framework for 3D CNN models is constructed, and numerical experiments are carried out using 3D CNNs of various scales. Our results demonstrate that the scale of full connection part is the key factor of prediction ability of 3D CNNs in this task. We also demonstrate that our method can effectively save computational time compared with traditional numerical methods such as the finite element method in large-scale prediction tasks.

mechanics,mathematics, interdisciplinary applications
Bridging finite element and deep learning: High-resolution stress distribution prediction in structural components

Hamed Bolandi,Xuyang Li,Talal Salem,Vishnu Naresh Boddeti,Nizar Lajnef

DOI: https://doi.org/10.1007/s11709-022-0882-5

IF: 3.252

2022-12-06

Frontiers of Structural and Civil Engineering

Abstract:Finite-element analysis (FEA) for structures has been broadly used to conduct stress analysis of various civil and mechanical engineering structures. Conventional methods, such as FEA, provide high fidelity results but require the solution of large linear systems that can be computationally intensive. Instead, Deep Learning (DL) techniques can generate results significantly faster than conventional run-time analysis. This can prove extremely valuable in real-time structural assessment applications. Our proposed method uses deep neural networks in the form of convolutional neural networks (CNN) to bypass the FEA and predict high-resolution stress distributions on loaded steel plates with variable loading and boundary conditions. The CNN was designed and trained to use the geometry, boundary conditions, and load as input to predict the stress contours. The proposed technique's performance was compared to finite-element simulations using a partial differential equation (PDE) solver. The trained DL model can predict the stress distributions with a mean absolute error of 0.9% and an absolute peak error of 0.46% for the von Mises stress distribution. This study shows the feasibility and potential of using DL techniques to bypass FEA for stress analysis applications.

engineering, civil
Micromechanics-based deep-learning for composites: Challenges and future perspectives

Mohsen Mirkhalaf,Iuri Rocha

DOI: https://doi.org/10.1016/j.euromechsol.2024.105242

IF: 4.873

2024-05-01

European Journal of Mechanics - A/Solids

Abstract:During the last few decades, industries such as aerospace and wind energy (among others) have been remarkably influenced by the introduction of high-performance composites. One challenge, however, for modeling and designing composites is the lack of computational efficiency of accurate high-fidelity models. For design purposes, using conventional optimization approaches typically results in cumbersome procedures due to huge dimensions of the design space and high computational expense of full-field simulations. In recent years, deep learning techniques have been found to be promising methods to increase the efficiency and robustness of a variety of algorithms in multi-scale modeling and design of composites. In this perspective paper, a short overview of the recent developments in micromechanics-based machine learning for composites is given. More importantly, existing challenges for further model enhancements and future perspectives of the field development are elaborated.

mechanics
A machine learning assisted multifidelity modelling methodology to predict 3D stresses in the vicinity of design features in composite structures

Omar A.I. Azeem,Silvestre T. Pinho

DOI: https://doi.org/10.1016/j.ijsolstr.2024.112946

IF: 3.667

2024-06-26

International Journal of Solids and Structures

Abstract:Multifidelity global–local finite element (FE) analyses are typically used to predict damage initiation hotspots around repetitive design features in large composite structures, such as composite airframes. We propose the use of machine learning (ML) methods to accelerate these analyses. We demonstrate this ML assisted framework for the stress analysis of a hole in plate feature in an aerospace C-spar structure. To enable this framework, we develop the following original features: a computationally efficient sampling scheme; a work-equivalent boundary condition homogenisation scheme; a volume averaged ply-by-ply stress approach; and a sequential long-short term memory neural network reformulated from a time basis to a stacking sequence basis with further bi-directionality customisation. Overall, we show that the developed method results in high-accuracy prediction of 3D stresses, with over two orders of magnitude reduction in modelling and simulation time compared to FE analyses.

mechanics
Deep Learning Predicts Stress–Strain Relations of Granular Materials Based on Triaxial Testing Data

Tongming Qu,Shaocheng Di,Y. T. Feng,Min Wang,Tingting Zhao,Mengqi Wang

DOI: https://doi.org/10.32604/cmes.2021.016172

2021-01-01

Computer Modeling in Engineering & Sciences

Abstract:This study presents an AI-based constitutive modelling framework wherein the prediction model directly learns from triaxial testing data by combining discrete element modelling (DEM) and deep learning. A constitutive learning strategy is proposed based on the generally accepted frame-indifference assumption in constructing material constitutive models. The low-dimensional principal stress-strain sequence pairs, measured from discrete element modelling of triaxial testing, are used to train recurrent neural networks, and then the predicted principal stress sequence is augmented to other high- dimensional or general stress tensor via coordinate transformation. Through detailed hyperparameter investigations, it is found that long short-term memory (LSTM) and gated recurrent unit (GRU) networks have similar prediction performance in constitutive modelling problems, and both satisfactorily predict the stress responses of granularmaterials subjected to a given unseen strain path. Furthermore, the unique merits and ongoing challenges of data-driven constitutive models for granular materials are discussed.
Deep Long Short-Term Memory Neural Network for Accelerated Elastoplastic Analysis of Heterogeneous Materials: an Integrated Data-Driven Surrogate Approach

Qiang Chen,Ruijian Jia,Shanmin Pang

DOI: https://doi.org/10.1016/j.compstruct.2021.113688

IF: 6.3

2021-01-01

Composite Structures

Abstract:In this work, an integrated data-driven surrogate approach based on the finite-volume direct averaging micromechanics (FVDAM) and the long short-term memory (LSTM) neural network is explored to predict the elastoplastic response of composite materials. In particular, the FVDAM is first applied to generate the uniaxial and cyclic response of unidirectional composites with various off-axis orientations. Next, a two-layered neural network is trained to associate the applied strains to the corresponding stresses, which is subsequently evaluated using the separate, hold-out testing dataset. The LSTM-estimated stress–strain responses coincide with the FVDAM reference results for all the loading cases. The advantage of the LSTM to naturally capture the history-dependent stress–strain behavior over the fully connected neural network is presented, with the percentage prediction errors of the former approach an order of magnitude lower than the latter. Moreover, the robustness of the LSTM surrogate model is examined by analyzing the training data with white noise. The proposed framework offers a viable alternative for the determination of the history-dependent response of composites directly from data analysis without the need to understand the underlying deformation mechanism in the techniques of homogenization, as well as provides a foundation for efficient multiscale analysis of composite materials and structures.
Data-driven methods for stress field predictions in random heterogeneous materials

Enjamamul Hoq,Osama Aljarrah,Jun Li,Jing Bi,Alfa Heryudono,Wenzhen Huang

DOI: https://doi.org/10.1016/j.engappai.2023.106267

IF: 8

2023-04-14

Engineering Applications of Artificial Intelligence

Abstract:Predicting full-field stress responses is of fundamental importance to assessing materials failure and has various engineering applications in design optimization, manufacturing process control, and structural health monitoring . This article develops and evaluates different data-driven methods for efficient and accurate predictions of full stress fields in random heterogeneous materials. The first approach integrates model order reduction of proper orthogonal decomposition (POD) with classical machine learning techniques (K-nearest neighbors, random forest , and artificial neural networks) to predict full-field responses based on POD-reduced coefficients. However, this strategy shows limitations in predicting full stress fields, especially for heterogeneous material inclusions of small size or being close to the domain boundary. After that, two computer vision-based deep learning approaches were developed for full-field predictions. The first one uses a Resnet-based Convolutional Neural Network (CNN), and the second is based on a modified conditional Generative Adversarial Network (cGAN). Two representative example problems were studied: a random heterogeneous material inclusion or a void varying in size and location. In contrast to POD-based classical machine learning, almost invisible differences were found between the entire stress fields in finite element simulations and computer vision-based deep learning (CNN/cGAN) predictions, with significantly reduced mean squared error (MSE) and correlation values (R2) mostly above 0.99. On the other hand, the proposed cGAN provides more accurate predictions than CNN with fewer epochs.

automation & control systems,computer science, artificial intelligence,engineering, electrical & electronic, multidisciplinary

Deep learning model to predict complex stress and strain fields in hierarchical composites

End-to-end deep learning method to predict complete strain and stress tensors for complex hierarchical composite microstructures

Prediction Model of Residual Load-Bearing Capacity of Composite Laminates Using Deep Learning

Image driven deep learning method with FFT solver for predicting the microscale full field stress of stochastic boundary composites

Prediction of Complex Strain Fields in Concrete Using a Deep Learning Approach

Predicting the temperature field of composite materials under a heat source using deep learning

Full-field prediction of stress and fracture patterns in composites using deep learning and self-attention

Prediction of local elasto-plastic stress and strain fields in a two-phase composite microstructure using a deep convolutional neural network

Predicting composite microstructure from deformation data using deep learning

Deep neural network method for predicting the mechanical properties of composites

Deep learning prediction of stress fields in additively manufactured metals with intricate defect networks

Deep Learning on Atomistic Physical Fields of Graphene for Strain and Defect Engineering

Neuro-DynaStress: Predicting Dynamic Stress Distributions in Structural Components

Difference-Based Deep Learning Framework for Stress Predictions in Heterogeneous Media

A three-dimensional prediction method of stiffness properties of composites based on deep learning

Bridging finite element and deep learning: High-resolution stress distribution prediction in structural components

Micromechanics-based deep-learning for composites: Challenges and future perspectives

A machine learning assisted multifidelity modelling methodology to predict 3D stresses in the vicinity of design features in composite structures

Deep Learning Predicts Stress–Strain Relations of Granular Materials Based on Triaxial Testing Data

Deep Long Short-Term Memory Neural Network for Accelerated Elastoplastic Analysis of Heterogeneous Materials: an Integrated Data-Driven Surrogate Approach

Data-driven methods for stress field predictions in random heterogeneous materials