Abstract:The combined utilization of mineral accelerators and nano-seeding materials is a novel method to promote the early strength of cement-based materials. In this paper, the effects of nano-C-S-H seed (NCS) on the early compressive strength of the Portland cement (PC)- calcium sulfoaluminate cement (CSA) binder were investigated. The results showed that NCS and CSA synergistically contributed to the early strength of PC. In detail, a 326.3% increase in the 10 h compressive strength of PC paste was obtained through the addition of NCS (2 wt%) and CSA (5%) in common. This was higher than the sum of the increases observed with the single additions of CSA (157.9%) or NCS (87.6%), with the same above dosage, in PC. Meanwhile, the early strength enhancement effects of NCS and CSA, when used together in PC, lasted longer than the effects of either used alone. Moreover, the synergetic effect mechanism was analyzed by isothermal calorimeter, QXRD, TGA, MIP, and SEM techniques. The calorimetry, XRD, and TGA results demonstrated that the synergistic mechanism was associated with the synergistic promotion effects of CSA and NCS on the hydrates. The fast hydration of CSA produced large amounts of ettringite and also consumed partial free water to promote the performance of the seeding effect of NCS which, simultaneously, further accelerated the precipitation of C-S-H gel and CH. The high alkie environment was also beneficial for the continuous generation of ettringite. In addition, the results of MIP and SEM measurements showed that the micro-filling effect of NCS significantly optimized the pore structure of a PC-CSA blend-hardened paste. Thus, the synergistic strength enhancement effects of CSA and NCS on PC were attributed to the matching of the promotion of hydration generation and the optimization of pore structures in hardening cement paste. The results of this article provide a new approach to achieving the rapid development of the early strength of cementitious materials, with potential applications in precast concrete and low-temperature construction.

Influence of Self-Compound Enhancer on Physical Properties of Pervious Concrete

Experimental study on strength and abrasion-resistance enhancement admixture

Influence of Mineral Admixtures on the Performance of Pervious Concrete and Microscopic Research

Synergistic Effect and Mechanism of Nano-C-S-H Seed and Calcium Sulfoaluminate Cement on the Early Mechanical Properties of Portland Cement

Study on the properties of EPS composite concrete enhanced by silane coupling agent: Experiment and molecular simulation

Synthesis and application of calcium silicate hydrate (C-S-H) nanoparticles for early strength enhancement by eco-friendly low carbon binders

Hydration kinetics and microstructure development of Ultra-High Performance Concrete (UHPC) by high volume of phosphorus slag powder

Examination of the Physical–Mechanical Properties of Sustainable Self-Curing Concrete Using Crushed Ceramic, Volcanic Powder, and Polyethylene Glycol

Novel C-A-S-H/PCE nanocomposites: Design, characterization and the effect on cement hydration

The Dispersion and Hydration Improvement of Silica Fume in UHPC by Carboxylic Agents

Alkalinity Regulation and Optimization of Cementitious Materials Used in Ecological Porous Concrete

Design of self-compacting ultra-high performance concrete (SCUHPC) towards to the cementitious materials packing optimization

A study on properties of pervious concrete with high-volume usage of supplementary cementitious materials as substitutes for cement

The synergistic strengthening effect of silane coupling agent on the interface between PVA/EPS and cement: experiment and molecular simulation

Conceptual design and performance evaluation of high strength pervious concrete

Study on the performance of hydrophilic curing agent and environmentally friendly non-pozzolanic filler for the development of self-curing self-compacting concrete

THE MECHANICAL STRENGTH AND DRYING SHRINKAGE BEHAVIOR OF HIGH PERFORMANCE CONCRETE WITH BLENDED MINERAL ADMIXTURE

Multi-scale analysis and structural application of the synergistic enhancement effect of silane coupling agent on the interface between PVA/rubber and cement

Evaluation of mechanical properties of silica fume mixed with pervious concrete pavement

Effectiveness Assessment of Superplasticizer Admixtures: Case of Self-compacting Concrete Reinforced with Fine Mineral Fillers

Properties prediction for self-compacting concrete incorporating activated fiber and stone chips