Abstract:Lapping is one of the standard essential methods to realise the global planarization of SiC and other semiconductor substrates. It is necessary to deeply study the mechanism to obtain SiC lapping process parameters with a strong comprehensive lapping performance (i.e., high material removal rate (MRRm), small surface roughness (Ra), and low total thickness variation (TTV)). The effects of the lapping process parameters and their interactions on lapping performance for SiC were investigated using orthogonal experiments; the effects on the MRRm, Ra, TTV, and optimal parameters under the conditions of a single evaluation index were investigated using intuitive analysis (range analysis, variance analysis, and effect curve analysis). The entropy value method and grey relational analysis were used to transform the multi-evaluation-index optimisation into a single-index optimisation about the grey relational grade (GRG) and to comprehensively evaluate the lapping performance of each process parameter. The results showed that the lapping plate types, abrasive size, and their interaction effect had the most significant effects on MRRm and Ra, with a contribution of over 85%. The interaction between the lapping plate types and abrasive size was also found to have the most significant effect on TTV, with a contribution of up to 51.07%. As the lapping plate's hardness and abrasive size increased, the MRRm and Ra also gradually increased. As the lapping normal-pressure increased, MRRm increased, Ra gradually decreased, and TTV first decreased and then increased. MRRm, Ra, and TTV first increased and then decreased with increasing abrasive concentration. Compared to the optimisation results obtained by intuitive analysis, the process parameter optimised by the grey relational analysis resulted in a smooth surface with an MRRm of 90.2 μm/h, an Ra of 0.769 nm, and a TTV of 3 μm, with a significant improvement in the comprehensive lapping performance. This study reveals that a combination of orthogonal experiments and grey relational analysis can provide new ideas for optimising the process parameters of SiC.

Comparison of Taguchi method and grey relational analysis method in process parameter optimization for shear thickening polishing of YAG crystal

Parameter Optimization of Roundness Quality Control for Machined Parts Based on Grey relational Analysis

Process Parameters Optimization Using Taguchi-Based Grey Relational Analysis in Laser-Assisted Machining of Si3N4

Shear-thickening polishing of inner raceway surface of bearing and suppression of edge effect

Research on Chemical Mechanical Polishing Technology for Zirconium-Based Amorphous Alloys

Process Parameter Optimization for CO2 Laser Polishing of Fused Silica Using the Taguchi Method

Process parameter optimization and surface integrity evolution in the high-speed grinding of TiAl intermetallics based on grey relational analysis method

Abrasive Jet Polishing Utilizing the Synergistic Effect of Ultrasonic Pulse-Cavitation and Process Optimization Research

Ultra-precision machining process of inner surface considering shear-thickening polishing method

Parameter optimization of ultrasonic vibration polishing K9 optical glass based on ultrasonic atomization

Optimisation of Lapping Process Parameters for Single-Crystal 4H-SiC Using Orthogonal Experiments and Grey Relational Analysis

Analysis and optimization of cutter geometric parameters for surface integrity in milling titanium alloy using a modified grey–Taguchi method

Surface Characteristics of Polished YAG Laser Crystal

Simulation and experimental study of ultrasonic-assisted shear thickening polishing of cemented carbide

Optimization of the Polishing Efficiency and Torque by Using Taguchi Method and ANOVA in Robotic Polishing

Experimental Study on Shear Rheological Polishing of Si Surface of 4H-SiC Wafer

Research on the shear thickening polishing CaF 2 with textured hollow polishing tool

Application of surface analysis in study on removal mechanism and abrasive selection during fused silica chemical mechanical polishing

Crystallographic orientation effect on the polishing behavior of LiTaO3 single crystal and its correlation with strain rate sensitivity

Multi-response optimization on the effect of wet and eco-friendly cryogenic turning of D2 steel using Taguchi-based grey relational analysis

The parameters optimization of robotic polishing with force controlled for mold steel based on Taguchi method