Abstract:In low temperature multi-effect distillation (LT-MED) seawater desalination system, the (super-)hydrophilic surface modification of aluminum alloy distillation desalination tube is effective in improving the performance of the desalination system and reducing the cost. However, the poor corrosion resistance of desalination tubes under (super-)hydrophilic surface modification is a bottleneck that limits the application of desalination tubes. This research breaks this technical bottleneck and proposes a simple, economical and industrially applicable method that jointly enhances hydrophilicity and corrosion resistance on aluminum alloy distillation desalination tubes. This method combines a concentrated anodizing electrolyte, pyrophosphoric acid, with an eco-friendly corrosion inhibitor, Na2MoO4, and prepares a superhydrophilic anodic oxide film with substantially enhanced corrosion resistance. The research shows that the concentration of Na2MoO4 in electrolyte plays a crucial role in the corrosion resistance of the superhydrophilic anodic oxide films: under the condition of ensuring the superhydrophilic surface of aluminum alloy (contact angle <5 degrees), as Na2MoO4 concentration (0-0.5 mol/L) increases, the higher the concentration of Na2MoO4 in the electrolyte, the better the corrosion resistance of the prepared superhydrophilic anodic oxide film. When adding 0.5 mol/L Na2MoO4 to 70 wt% pyrophosphoric acid electrolyte, compared with the superhydrophilic anodic oxide film without the addition of Na2MoO4, the prepared superhydrophilic film has its corrosion potential increased by 0.451 V, corrosion current density reduced by nearly four times, and corrosion inhibition efficiency increased from 25 % to 80 %. This research reveals the mechanism by which the corrosion inhibitor Na2MoO4 enhances the corrosion resistance of superhydrophilic anodic oxide film through adsorption of the porous layer, thickening of the barrier layer and Mo(+VI) incorporating. This paper provides a new idea and method for developing aluminum alloy desalination tubes with both stable superhydrophilicity and excellent corrosion resistance.

Effects of Superheated Surface on the Deposition Behavior of Na2SO4 in Supercritical Water

Pool Boiling Heat Transfer During Quenching on a Superhydrophilic Surface in Dilute Aqueous Saline Solutions: Effects of the Solution Concentration and Type of Salts

Macro-characteristics and micro-mechanisms of Na2SO4 precipitation dissolved by KNO3 molten salt in a continuous supercritical water system

Precipitation Behavior of Salts in Supercritical Water: Experiments and Molecular Dynamics Simulations

Revealing the Effect of O2, SO2 and H2O in Supercritical CO2 on the Corrosion Behavior of 316L Steel at Elevated Temperature

Characteristics, mechanisms and measurement methods of dissolution and deposition of inorganic salts in sub-/supercritical water

Controlling Calcium Sulfate Scalein Process of Multi - Stage Distillation Desalination of Sea Water

Characterizing and Exploring the Formation Mechanism of Salt Deposition by Reusing Advanced-softened, Silica-rich, Oilfield-produced Water (ASOW) in Superheated Steam Pipeline

Molecular dynamics simulation and experimental analysis of nucleation and growth mechanism of mixed inorganic salts in supercritical water

Study on the Superhydrophilic Modification and Enhanced Corrosion Resistance Method of Aluminum Alloy Distillation Desalination Tubes

Molecular Dynamics Study on the Nucleation Characteristics of Mixed Na 2 SO 4 /K 2 SO 4 Solution in Supercritical Water

Influence of Organic Impurities on Fractional Crystallization of NaCl and Na2SO4 from High-Salinity Coal Chemical Wastewater: Thermodynamics and Nucleation Kinetics Analysis

Kinetic Study on Crystal Growth of NaCl and K2SO4

Regulated Transient Pool Boiling of Water During Quenching on Nanostructured Surfaces with Modified Wettability from Superhydrophilic to Superhydrophobic

An experimental investigation into the effect of sodium salts on quartz particle agglomeration and bed defluidisation in a bubbling fluidised bed

Inorganic salts in sub-/supercritical water—Part A: Behavior characteristics and mechanisms

Experimental investigation of surface roughness/wettability pattern effect on crystallization fouling over falling-film flow

Preparation of SGO-modified Nanofiltration Membrane and Its Application in SO42 − and Cl− Separation in Salt Treatment

Effect of Concentration and Addition of Ions on the Adsorption of Sodium Dodecyl Sulfate on Stainless Steel Surface in Aqueous Solutions

Effect of Reusing the Advanced-Softened, Silica-Rich, Oilfield-Produced Water (asow) on Finned Tubes in Steam-Injection Boiler

Physico-Chemical Properties of Molten NaCl–KCl–Na2S System for Sulfide Electrolytic Desulfurization