Abstract:Glucose is one of the most important monosaccharides found in the food, as a part of more complex structures, which is a primary energy source for the brain and body. Thus, the monitoring of glucose concentration is more important in food and biological samples in order to maintain a healthy lifestyle. Herein, an electrochemical glucose biosensor was fabricated by immobilization of glucose oxidase (GOX) onto poly(3,4-ethylenedioxythiophene):4-sulfocalix [4]arene (PEDOT:SCX)/MXene modified electrode. For this purpose, firstly, PEDOT was synthesized in the presence of SCX (counterion) by the chemical oxidative method. Secondly, MXene (a 2D layered material) was synthesized by using a high-temperature furnace under a nitrogen atmosphere. After that, PEDOT:SCX/MXene (1:1) dispersion was prepared by ultrasonication which was later utilized to prepare PEDOT:SCX/MXene hybrid film. A successful formation of PEDOT:SCX/MXene film was confirmed by HR-SEM, Fourier transform infrared (FT-IR), and Raman spectroscopies. Due to the biocompatibility nature, successful immobilization of GOX was carried out onto chitosan modified PEDOT:SCX/MXene/GCE. Moreover, the electrochemical properties of PEDOT:SCX/MXene/GOX/GCE was studied through cyclic voltammetry and amperometry methods. Interestingly, a stable redox peak of FAD-GOX was observed at a formal potential of –0.435 V on PEDOT:SCX/MXene/GOX/GCE which indicated a direct electron transfer between the enzyme and the electrode surface. PEDOT:SCX/MXene/GOX/GCE also exhibited a linear response against glucose concentrations in the linear range from 0.5 to 8 mM. The effect of pH, sensors reproducibility, and repeatability of the PEDOT:SCX/MXene/GOX/GCE sensor were studied. Finally, this new biosensor was successfully applied to detect glucose in commercial fruit juice sample with satisfactory recovery.

Electrocatalytic Glucose Sensing in Sports Beverages and Serum Using Mxene/ZnO Composite Material

MXene nanoflakes decorating ZnO tetrapods for enhanced performance of skin-attachable stretchable enzymatic electrochemical glucose sensor

Cu/Cu 2 O/C nanoparticles and MXene based composite for non-enzymatic glucose sensors

Fabrication of MnOx/Ni(OH)2 Electro-Deposited Sulfonated Polyimides/graphene Nano-Sheets Membrane and Used for Electrochemical Sensing of Glucose

Development of non-enzymatic D-glucose and ethanol electroactive electrode based on ZnO–Cu/C multifunctional nanocomposite

A High Performance Triboelectric Nanogenerator Based on MXene/Graphene Oxide Electrode for Glucose Detection

CuxO decorated Ti3C2Tx MXene composites for non-enzymatic glucose sensing with large linear ranges

Ti3C2Tx MXene/Graphene/AuNPs 3D porous composites for high sensitivity and fast response glucose biosensing

Cu-Doped ZnO Nanoparticles for Non-Enzymatic Glucose Sensing

Room temperature ultrafast synthesis of zinc oxide nanomaterials via hydride generation for non-enzymatic glucose detection

Application of Cobalt Hydroxide Nano-Sheets as Electrocatalyst Material for Measuring of Glucose in Blood Samples from Athletes

Highly sensitive surface plasmon resonance sensor with surface modified MoSe 2 /ZnO composite film for non-enzymatic glucose detection

A Biosensor Based on Fe3O4@ MXene-Au Nanocomposites with High Peroxidase-Like Activity for Colorimetric and Smartphone-Based Detection of Glucose

Glucose biosensors based on nano-composites of multi-walled carbon nanotubes and zinc oxide nanorods

Facile Synthesis of MXene-Ti3C2/Co Nanosheet Hydrogel Sensor with the Assistance of a Smartphone for On-Site Monitoring of Glucose in Beverages

An Amperometric Glucose Biosensor Based on the Immobilization of Glucose Oxidase on the ZnO Nanotubes

Non-enzymatic Glucose Sensor Based on Porous Foam Au/Mxene Nanocomposites

Electrochemical Sensing of Glucose Using Glucose Oxidase/PEDOT:4-Sulfocalix [4]arene/MXene Composite Modified Electrode

Nanoporous CuZn supported CuO nanoparticle electrodes for non-enzymatic electrochemical glucose detection

A high–performance non–enzymatic glucose sensor based Au and ZrO 2 nanoparticles supported on multi-walled carbon nanotubes

Copper Nanoparticle/Graphene Oxide/Single Wall Carbon Nanotube Hybrid Materials As Electrochemical Sensing Platform for Nonenzymatic Glucose Detection