Abstract:Graphene-gold nanohybrids have become a hot research topic in material science, because the hybridization can be an effective strategy to enhance the functionality of materials and the integration of nanomaterials on graphene nanosheets potentially paves a new way to improve their electronic, chemical and electrochemical properties. The study reported a novel graphene-gold nanohybrid with excellent electrocatalytic performance for electrochemical detection of glucose. First, the monodisperse gold nanoparticles (GNs) were prepared via the citrate reduction associated with pH-shifting. The resulting GNs give an average particle size of 6 nm and narrow size distribution. Then, one part of the GN solution was mixed with the graphite oxide solution, which followed by the ascorbic acid reduction and unidirectional freeze-drying to prepare graphene aerogel@GNs (GA@GNs). The formed GA@GNs offers a well-defined three-dimensional and orientated porous structure. In addition, the most of GNs in the aerogel was embedded in the intertwined graphene sheets. Finally, another part of the GN solution was sucked into the GA@GNs to obtain GA@GNs/GNs. It was subjected to freeze-drying and thermal annealing in air at 180 degrees C to remove the citrate modified on the surface of GNs. Because their active sites were well exposed outside, the adsorbed GNs are of high catalytic activity. The study shows that the as-prepared GA@GNs/GNs gives high electrical conductivity (15.4 S m(-1)), specific surface area (291.6 m(2) g(-1)) and apparent heterogeneous electron transfer rate constant (14.8 +/- 0.12 cm s(-1)). The sensor based on the GA@GNs/GNs displays ultrasensitive electrochemical response to glucose, owing to largely enhanced electron transfer, mass transport and catalytic activity. Its peak current linearly increases with the increase of glucose in the range from 0.01 to 16 mM with the detection limit of 0.004 mM (S/N = 3). The analytical method presents the advantage of sensitivity, repeatability and stability compared with present glucose sensors. It has been successfully applied in the detection of glucose in serum samples with the spiked recovery of 95.7-104.2%. The study also provides a promising approach for building on various graphene-metal nanohybrids with excellent electrochemical performance for sensing, catalysis and energy storage/conversion devices. (C) 2014 Elsevier B.V. All rights reserved.

A High Performance Triboelectric Nanogenerator Based on MXene/Graphene Oxide Electrode for Glucose Detection

Sensitive enzymatic glucose detection by TiO2 nanowire photoelectrochemical biosensors

Preparation of Self‐Driven Triboelectric Nanosensor Based on Chitosan‐Coated Ti Foil for Detecting Blood Glucose Concentration

Ti3C2Tx MXene/Graphene/AuNPs 3D porous composites for high sensitivity and fast response glucose biosensing

A NiFe Alloy Reduced on Graphene Oxide for Electrochemical Nonenzymatic Glucose Sensing.

Copper Nanoparticle/Graphene Oxide/Single Wall Carbon Nanotube Hybrid Materials As Electrochemical Sensing Platform for Nonenzymatic Glucose Detection

In-situ two-step electrodeposition of α-CD-rGO/Ni-MOF composite film for superior glucose sensing

Electrochemical Properties Analysis of Immobilized Glucose Oxidase on Multi-Walled Carbon Nanotubes and Hydroxy-Fullerene Nanocomposites

RGO@Cu 2 O@Cu Ternary Nanocomposite for High-Performance Non-Enzymatic Glucose Detection

RGO@Cu2O@Cu Ternary Nanocomposite for High-Performance Non-Enzymatic Glucose Detection

Electrocatalytic Glucose Sensing in Sports Beverages and Serum Using Mxene/ZnO Composite Material

A glucose biosensor based on direct electrochemistry of glucose oxidase immobilized on nitrogen-doped carbon nanotubes.

Glucose biosensors based on nano-composites of multi-walled carbon nanotubes and zinc oxide nanorods

Novel Graphene-Gold Nanohybrid with Excellent Electrocatalytic Performance for the Electrochemical Detection of Glucose

Screen-printed electrochemical biosensor based on a ternary Co@MoS2/rGO functionalized electrode for high-performance non-enzymatic glucose sensing

A Glucose Sensor Based on Surface Functionalized MXene

Ni@TiO2 nanoribbon array electrode for high-efficiency non-enzymatic glucose biosensing

Facilely Prepared Co-based MOF Functionalized N, S-doped Reduced Graphene Oxide for Electrochemical Non-Enzymatic Glucose Sensing

CuxO decorated Ti3C2Tx MXene composites for non-enzymatic glucose sensing with large linear ranges

Fabrication of MnOx/Ni(OH)2 Electro-Deposited Sulfonated Polyimides/graphene Nano-Sheets Membrane and Used for Electrochemical Sensing of Glucose

A flexible high-output triboelectric nanogenerator based on MXene/CNT/PEDOT hybrid film for self-powered wearable sensors