Abstract:The temperature evolution, stress evolution, and dendrite growth during the laser metal deposition (LMD) process of Inconel 718 alloy were simulated using a multi-scale model that combines the finite element method and the Cellular Automata (CA) method. This model established the relationship between the thermal behavior of the molten pool and the solidification characteristics, and predicted the morphological size of the solidified structure. Research indicates that under conditions of higher cooling rate and lower shape control factor, equiaxed grains are prone to form, with a lower degree of elemental segregation in this region, which is conducive to the precipitation of granular Laves phase. Conversely, under conditions of lower cooling rate and higher shape control factor, columnar grains are more likely to form, with a higher degree of elemental segregation in this region, leading to the precipitation of chain-like Laves phase. The results of thermo-mechanical coupled simulation suggest that the maximum transient thermal stress is located at the overlap position, and when the component cools down to room temperature, the maximum normal stress along the scanning direction is observed. Dendritic growth results demonstrate that during the equiaxed grain growth process in the top region of the melt pool, the released solute is constrained by time and space, leading to the accumulation of solute and the formation of interdendritic segregation. In areas with a higher grain density, the solute accumulation zones overlap, resulting in an increase in solute concentration, which inhibits dendrite growth. In the middle region of the melt pool, during the columnar grain growth process, the solute concentration in the gaps between adjacent grains continuously increases, resulting in micro-segregation phenomena. Experimental measurements have shown that the temperature field's melt pool morphology, stress values along the scanning path, and dendritic morphology are in good agreement with the experimental outcomes.

Numerical simulation of microstructure evolution during laser directed energy deposition for Inconel 718 using cellular automaton method coupled with Eulerian multiphase

Thermodynamic Behavior and Microstructure Evolution of Inconel 718 Alloy by Laser Metal Deposition

Validation and application of cellular automaton model for microstructure evolution in IN718 during directed energy deposition

The microstructural evolution and mechanical response of laser direct energy deposition Inconel 718 alloy based on simulation and experimental methods

Multi-Scale Simulation Of Grain Growth During Laser Beam Welding Of Nickel-Based Superalloy

Prediction of Primary Dendrite Arm Spacing of the Inconel 718 Deposition Layer by Laser Cladding Based on a Multi-Scale Simulation

Simulation of heat transfer and dendrite growth during the arc deposition of nickel-based superalloy via finite element-phase field modeling

The Crystal Growth, Intercellular Spacing and Microsegregation of Selective Laser Melted Inconel 718 Superalloy

Investigation on the Microporosity Formation of IN718 Alloy during Laser Cladding Based on Cellular Automaton

Prediction of Epitaxial Grain Growth in Single-Track Laser Melting of IN718 Using Integrated Finite Element and Cellular Automaton Approach

Macro-Micro Coupled Simulation of SLM Process with Inconel 718 Superalloy

Effect of Grain Size on Deformation and Fracture of Inconel718: an In-Situ SEM-EBSD-DIC Investigation

Influence of pulsed laser scanning patterns on microstructural evolution and mechanical properties of Inconel 718 in direct laser deposition

Phase-field simulation of microstructure evolution in electron beam additive manufacturing

Phase field simulation of dendrite evolution during powder-based laser metal deposition

Numerical simulation and solidification characteristics for laser cladding of Inconel 718

Evolution of dislocation cellular pattern in Inconel 718 alloy fabricated by laser powder-bed fusion

Numerical Modelling Of Microstructure Evolution And Dendrite Growth In Alloy Solidification Process

On the primary spacing and microsegregation of cellular dendrites in laser deposited Ni-Nb alloys

Microstructure evolution of an Inconel 718 alloy prepared by electron beam smelting

Simulation and analysis of $γ$-Ni cellular growth during laser powder deposition of Ni-based superalloys