Abstract:The importance of amorphous and nanocrystalline Fe-based soft magnetic materials is increasing annually. Thus, characterisation of the chemical compositions, alloying additives, and crystal structures is significant for obtaining the appropriate functional properties. The purpose of this work is to present comparative studies on the influence of Nb (1, 2, 3 at.%) and Mo (1, 2, 3 at.%) in Fe substitution on the thermal stability, crystal structure, and magnetic properties of a rapidly quenched Fe79.4Co5Cu0.6B15 alloy. Additional heat treatments in a vacuum (260-640 °C) were performed for all samples based on the crystallisation kinetics. Substantial improvement in thermal stability was achieved with increasing Nb substitution, while this effect was less noticeable for Mo-containing alloys. The heat treatment optimisation process showed that the least lossy states (with a minimum value of coercivity below 10 A/m and high saturation induction up to 1.7 T) were the intermediate state of the relaxed amorphous state and the nanocomposite state of nanocrystals immersed in the amorphous matrix obtained by annealing in the temperature range of 340-360 °C for 20 min. Only for the alloy with the highest thermal stability (Nb = 3%), the α-Fe(Co) nanograin grows, without the co-participation of the hard magnetic Fe3B, in a relatively wide range of annealing temperatures up to 460 °C, where the second local minimum in coercivity and core power losses exists. For the remaining annealed alloys, due to lower thermal stability than the Nb = 3% alloy, the Fe3B phase starts to crystallise at lower annealing temperatures, making an essential contribution to magneto-crystalline anisotropy, thus the substantial increase in coercivity and induction saturation. The air-annealing process tested on the studied alloys for optimal annealing conditions has potential use for this type of material. Additionally, optimally annealed Mo-containing alloys are less lossy materials than Nb-containing alloys in a frequency range up to 400 kHz and magnetic induction up to 0.8 T.

Comparative study of V and Mo on the glass formation and magnetic properties of Fe-Si-B-Cu-Nb-M (M=V, Mo) nanocrystalline for high frequency applications

Microwave Frequency Performance and High Magnetic Anisotropy of Nanocrystalline Fe<SUB>70</SUB>Co<SUB>30</SUB>-B Films Prepared by Composition Gradient Sputtering

Optimized Giant Magnetoimpedance Effect In Amorphous And Nanocrystalline Materials

Magnetization Process in NANOPERM-type Nanocrystalline Alloy

Improving the glass formation ability and magnetic properties by Nb in Fe-Si-B-P-Cu-Nb nanocrystalline alloys

Effects of Mo Additions on the Glass-Forming Ability and Magnetic Properties of Bulk Amorphous Fe-C-Si-B-P-Mo Alloys

Crystallization and Soft Magnetic Behavior of Fe85.6−Mo Zr3.3Nb3.3B6.8Cu1 Alloys

Influence of Nb and Mo Substitution on the Structure and Magnetic Properties of a Rapidly Quenched Fe79.4Co5Cu0.6B15 Alloy

Improved glass forming ability and soft magnetic properties by minor Mo alloying in Fe–P–C–B–Si bulk metallic glasses

On the glass forming ability (GFA), crystallization behavior and soft magnetic properties of nanomet-substituted alloys

The Role of Cr in Optimizing Properties of Fe–B–C–P–Si–Mo–Cr Metallic Glasses for Applications

Enlarging heat-treatment processing windows of Fe–Si–B–P–Cu–M nanocrystalline alloys by doping transition metal elements

Effect of Mo on Nanocrystallization and Magnetic Properties of Fe 83− X B 10 C 6 Cu 1 Mo X ( X = 0–1.25) Soft Magnetic Alloys

Effects of Mo on the Glass Forming Ability and Properties of Fe-B-C-P-Si-Mo Bulk Metallic Glasses

Effects of Mn addition on crystallization behavior and soft magnetic properties of Fe–Si–B–P–Cu nanocrystalline alloy

The effect of composition on glass-forming ability, crystallization behavior, and soft magnetic properties of FeSiBCuNbNiCo amorphous/nanocrystalline alloys

Excellent Soft Magnetic Properties and Enhanced Glass Forming Ability of Fe-Si-B-C-Cu Nanocrystalline Alloys

Ultrahigh Permeability at High Frequencies via A Magnetic‐Heterogeneous Nanocrystallization Mechanism in An Iron‐Based Amorphous Alloy

Nanocrystallization, magnetic properties and bending ductility of antiferromagnetic Mn-doped FeSiBCuPC alloys induced by micro-compressive stress annealing

Effect of Si/B ratio on glass-forming ability, phase transitions and magnetic properties in (Fe40Ni40SixByCu1)0.97Nb0.03 alloys

The preparation and magnetic properties of FeSiCr/MoS2 soft magnetic composites