Abstract:Supported single-atom catalysts have become one of the most exciting frontiers in heterogeneous catalysis. The physicochemical properties of these materials are highly interesting; however, the generation of stable single atoms on solid supports is still challenging. Herein, we report an efficient and operationally simple postsynthesis method, consisting of spatial confining, freeze-drying, and reducing steps, for the construction of singly dispersed palladium atoms on SAPO-31 (Pd1/SAPO-31) with promising application prospects in the semihydrogenation of alkynes. A typical Pd–N–C single-atom catalyst derived from the ZIF-8-supported palladium complex was prepared and compared to Pd1/SAPO-31. The Pd1/SAPO-31 catalyst showed outstanding performance in the semihydrogenation of both phenylacetylene (85% selectivity at 99% conversion, 40 min) and 1-chloro-4-ethynylbenzene (95% selectivity at 99% conversion, 60 min). In addition, this single-atom palladium catalyst was highly active in triethoxysilane oxidation. Most importantly, this catalyst retained its atomic dispersion and catalytic activity after high-temperature thermal treatment in Ar at 700 °C. This study demonstrates how zeolites can be used to confine atomically dispersed metal species and tune the activity and stability of these materials to meet the needs of practical applications.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsanm.0c03216?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsanm.0c03216</a>.Characteristics of the catalysts revealed by XRD patterns; XPS spectra; O K-edge spectrum; FT-IR spectrum; Raman spectrum; TGA curve; SEM, TEM, and HR-TEM images; pore size distributions; and catalytic performance of the catalysts (<a class="ext-link" href="/doi/suppl/10.1021/acsanm.0c03216/suppl_file/an0c03216_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

What problem does this paper attempt to address?

The key problem that this paper attempts to solve is how to prepare stable single - atom palladium catalysts and apply them to the selective semi - hydrogenation reactions of alkynes and the silane oxidation reactions. Specifically: 1. **Preparation of stable single - atom palladium catalysts**: The researchers developed a simple and efficient post - synthesis method. Through spatial confinement, freeze - drying and reduction steps, highly stable monodispersed palladium atoms (Pd_1/SAPO - 31) were constructed on SAPO - 31 (silicoaluminophosphate - 31). This method solves the problem that traditional single - atom catalysts are prone to agglomeration in practical applications. 2. **Improvement of catalytic performance**: The prepared Pd_1/SAPO - 31 catalyst exhibits excellent catalytic performance in the selective semi - hydrogenation reactions of phenylacetylene and 1 - chloro - 4 - ethynylbenzene. For example, in the phenylacetylene semi - hydrogenation reaction, Pd_1/SAPO - 31 can achieve a 99% conversion rate and 85% selectivity to generate styrene within 40 minutes; while in the 1 - chloro - 4 - ethynylbenzene semi - hydrogenation reaction, it can reach a 99% conversion rate and 95% selectivity to generate 1 - chloro - 4 - vinylbenzene within 60 minutes. 3. **Expansion of application range**: Besides semi - hydrogenation reactions, the Pd_1/SAPO - 31 catalyst also shows high activity and selectivity in the oxidation reaction of triethoxysilane. It can convert triethoxysilane into H - Si(OH)_3 within 20 minutes, with 84% selectivity and 99% conversion rate. 4. **Verification of thermal stability**: To verify its applicability under actual industrial conditions, the researchers also tested the thermal stability of the Pd_1/SAPO - 31 catalyst. The results show that even after being treated at a high temperature of 700 °C for 2 hours, the catalyst can still maintain its atomic dispersion state and catalytic activity. In conclusion, this research successfully solves the problems of stability and activity of single - atom catalysts in practical applications and provides new ideas for developing efficient and stable single - atom catalysts.

Isolated Palladium Atoms Dispersed on Silicoaluminophosphate-31 (SAPO-31) for the Semihydrogenation of Alkynes

Encapsulation of Pd Single-Atom Sites in Zeolite for Highly Efficient Semihydrogenation of Alkynes

Highly Active and Stable Palladium Single-Atom Catalyst Achieved by a Thermal Atomization Strategy on an SBA-15 Molecular Sieve for Semi-Hydrogenation Reactions

Interface Confinement in Metal Nanosheet for High-Efficiency Semi-Hydrogenation of Alkynes

Direct Synthesis of Atomically Dispersed Palladium Atoms Supported on Graphitic Carbon Nitride for Efficient Selective Hydrogenation Reactions

Cu2O-Supported Atomically Dispersed Pd Catalysts for Semihydrogenation of Terminal Alkynes: Critical Role of Oxide Supports

Encapsulation of Palladium Carbide Subnanometric Species in Zeolite Boosts Highly Selective Semihydrogenation of Alkynes

High-entropy Metal Oxide-polyoxometalate-palladium Sub-1 Nm Nanowires for Semi-hydrogenation Reaction of Alkynes

Selective Hydrogenation on a Highly Active Single-Atom Catalyst of Palladium Dispersed on Ceria Nanorods by Defect Engineering

Application of Pd Nanoparticles Supported on Mesoporous Hollow Silica Nanospheres for the Efficient and Selective Semihydrogenation of Alkynes

Mesoporous α-Al 2 O 3 -supported PdCu bimetallic nanoparticle catalyst for the selective semi-hydrogenation of alkynes

Lattice Strain and Mott-Schottky Effect of the Charge-Asymmetry Pd1Fe Single-Atom Alloy Catalyst for Semi-Hydrogenation of Alkynes with High Efficiency

Isolated Single-Atom Pd Sites in Intermetallic Nanostructures: High Catalytic Selectivity for Semihydrogenation of Alkynes

Low-Temperature Synthesis of Single Palladium Atoms Supported on Defective Hexagonal Boron Nitride Nanosheet for Chemoselective Hydrogenation of Cinnamaldehyde

Mesoporous Palladium Catalyst for Efficient Electrochemical Semi‐Hydrogenation of Alkynes

Alkyne Semihydrogenation over Pd Nanoparticles Embedded in N,S-Doped Carbon Nanosheets

Ultrafine PdCo bimetallic nanoclusters confined in N-doped porous carbon for the efficient semi-hydrogenation of alkynes

Single-Atom Ni-Modified Al 2 O 3 -Supported Pd for Mild-Temperature Semi-hydrogenation of Alkynes

Activation and Spillover of Hydrogen on Sub‐1 Nm Palladium Nanoclusters Confined Within Sodalite Zeolite for the Semi‐Hydrogenation of Alkynes

In-situ Facile Synthesis Novel N-doped Thin Graphene Layer Encapsulated Pd@N/C Catalyst for Semi-hydrogenation of Alkynes

Acceleration of the semi-hydrogenation of alkynes over an N-doped porous carbon sphere-confined ultrafine PdCu bimetallic nanoparticle catalyst