Abstract:The supercapacitors (SCs) have become a great candidate for high power applications in energy storage units which bridge the gap between conventional capacitors and batteries fuels cells. This is because of their relatively higher specific energy compared to normal parallel plate capacitors, and higher power density and longer cycling stability, fast charge–discharge time, low level of heating, appropriate dimension/weight and low cost. The Carbon materials are considered as ideal electrode materials for supercapacitors, they play an important role in energy storage devices due to their large specific surface area, tunable pore size, high electrical conductivity and strong mechanical property, nevertheless most of the commercial activated carbons are produced from fossil fuel-based precursor (petroleum and coal) which made them to be expensive and environmentally non-friendly. hence the increasing focus on biomass precursors which are cheaper, readily available, renewable, structurally porous and environmentally friendly. Agriculture production and agro-industrial processes generate a large amount of waste. That can potentially be used to obtain important functional materials. Thus, it is possible to prepare activated carbon with high specific surface from various type of biomass. Taking all this into account, our work has focused on the use of Argan residues, very abundant in Morocco, for the production of activated carbons with developed porosity. The resulting material was evaluated as electrode material for the supercapacitor, Valuable strategies are the use of aqueous electrolytes and activated carbon that enable the valorization of wastes in a circular economy approach. The Argan residues (ANS, Argan Nut Shell) were ground to obtain a particle size of 1-3 mm The ACs were prepared by chemical activation with KOH in two steps: carbonization of the precursor followed by activation of the biochar. In the two-stage process, carbonization was carried out at 500 °C and in all cases, KOH is used in lentils. The following process variables were studied: activation temperature (700, 800 and 850 °C) and KOH/AS ratio (3/1 and 4/1). After the heat treatment, the samples were washed with 5 M HCl solution until neutral pH and dried (110 °C, 12 h). Activated carbons were characterized by N 2 -196 °C and CO 2 adsorption at 0 °C, scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The symmetric SC was assembled with the two identical electrodes (positive/negative) by sandwiching a filter paper as a separator (Whatman). Then, few drops of aqueous 1M H 2 SO 4 dropped in between the electrodes. The electrochemical techniques used were Cyclic voltammetry and galvanostatic charge/discharge cycling. Cyclic voltammetry (CV) was scanned from 5 to 80 mV/s. Galvanostatic charge−discharge experiment was performed with a specific current from 0.125 to 12A.g -1 . The study showed that the new mechanism used to produce the activated carbon from Argan Nut shell lead to high surface area. The optimum activated carbon obtained by operating carbonization temperature as 500°C and activation temperature at 800°C with KOH activation, with these conditions the results were (S BET =3091 m 2 .g -1 , V T =1.52 cm 3 .g -1 ), In contrast, the symmetric two electrode system exhibits outstanding charge storage capacity, reaching a high specific capacitance ranging between 512-320 F.g −1 at 0.125 A g −1 . Remarkable electrochemical performance is further demonstrated using Argan Nut Shell, with an excellent rate performance after 2500 cycles, the capacitance still remained at 92 %, indicating great cycle stability. This study demonstrated the interesting nature of Argan Nut shell to develop cost effective electrode materials for supercapacitors with high performance. To conclude, high surface area and porosity of the prepared ACs can serve as a flexible backbone for constructing wearable energy storage devices. Clearly, using biomasses are definitely the right track towards making renewable carbon materials and energy storage. Figure 1

Valorization of Prosopis Juliflora biochar for supercapacitor application: Techno-economic and lifecycle analysis

Preparation of Porous Biochar and Its Application in Supercapacitors

Biomass-Based Fuels and Activated Carbon Electrode Materials: An Integrated Approach to Green Energy Systems

Biomass conversion into activated carbon as a sustainable energy material for the development of supercapacitor devices

Recent developments in biomass-derived carbon as a potential sustainable material for super-capacitor-based energy storage and environmental applications

Valorization of Biomass-Derived Polymers to Functional Biochar Materials for Supercapacitor Applications via Pyrolysis: Advances and Perspectives

Facile Synthesis of Functionalized Porous Carbon by Direct Pyrolysis of Anacardium occidentale Nut-Skin Waste and Its Utilization towards Supercapacitors

Facile Synthesis of Sustainable Biomass-Derived Porous Biochars as Promising Electrode Materials for High-Performance Supercapacitor Applications

Effective cost and high-performance supercapacitor electrodes from Syzygium oleana leave biomass wastes

Comparative environmental impact assessment of activated carbon electrodes for supercapacitors

High-performance supercapacitor based on self-heteroatom-doped porous carbon electrodes fabricated from Mikania micrantha

Bio-Waste Argan Nut Shell-Derived Porous Activated Carbon for High Performance Supercapacitor Electrode Material

Novel onion flower-derived biochar for high-performance sustainable supercapacitor applications

Porous Hard Carbon as High-Performance Electrode Material for Supercapacitors: Towards Sustainable Approach

A sustainable technique to solve growing energy demand: porous carbon nanoparticles as electrode materials for high-performance supercapacitors

Synthesis and Performance Evaluation of Supercapacitor Based on Manganese Loaded Biochar/Polyaniline Nanocomposite

Nanoarchitectonics of hierarchical porous biochars from heavy bio-oil by coupling calcium salts assisted template carbonization and K 2 CO 3 activation for high-performance supercapacitors

Porous Carbon derived from Pine Nut Shell prepared by Steam Activation for Supercapacitor Electrode Material

Effects of physical and chemical activations on the performance of biochar applied in supercapacitors

Sustainable porous activated carbon from Polyalthia longifolia seeds as electrode material for supercapacitor application

Sustainable development of biomass-derived activated carbon through chemical and physical activations and its effect on the physicochemical and electrochemical activity