Abstract:Sub‐5‐ppb hydrogen (H2) detection and sub‐10‐s response and recovery times are achieved based on nano‐patterned polycrystalline CuO nanowires nanogap gas sensors with voids using electron‐beam lithography and unique annealing processes. Pre‐H2 annealing, void‐generating oxidation, and downscaled nanogap electrodes are key to improving the sensing performance. This study demonstrates the feasibility of using effective hydrogen sensors that meet high safety standards. Hydrogen (H2) is increasingly employed in industrial applications, such as developing hydrogen fuel cells for vehicles and power plants. However, H2 explodes at a concentration limit of 4%, necessitating the development of ultrasensitive hydrogen sensors capable of early‐stage detection of hydrogen leaks. In this study, nano‐patterned polycrystalline cupric oxide (CuO) nanowire array nanogap gas sensors with voids are fabricated using electron‐beam lithography and ex situ oxidization by annealing, which could detect 5 ppb H2 and show response and recovery times of less than 10 s without a baseline shift. Combining a pre‐H2 annealing process in Ar/H2 for Cu nanowires and a low‐rate oxidation process enhances the crystallinity of CuO nanowires, facilitating the preparation of polycrystalline CuO nanowires with voids, which is a significantly practical approach for the improvements of gas sensing properties. Response and recovery times of <10 s can be obtained for a gap separation of ≈30 nm. These improvements are discussed based on a high electric field of ≈1.3 MV cm−1. The relationship between the normalized response and H2 concentration is discussed based on the power law. This paper presents highly reliable and fast H2 sensors without a baseline shift to meet the demands of the hydrogen industry.

Pd/Ni nanowire film coated SAW hydrogen sensor with fast response

SAW Sensor Employing Pd/Ni Nanowire for Super-Fast Hydrogen Detection at Room Temperature

Single‐Crystal Pd and Its Alloy Nanowires for Plasmon Propagation and Highly Sensitive Hydrogen Detection

A Reliable and Fast Hydrogen Gas Leakage Detector Based on Irreversible Cracking of Decorated Palladium Nanolayer Upon Aligned Polymer Fibers

Enhanced response speed of SAW based hydrogen sensor employing a micro-heater

An easy-fabricated hydrogen gas sensor based on palladium-decorated polyurethane nanofibers

The distinguished hydrogen sensibility by selecting diameters of single-walled carbon nanotubes and adding sensitive materials

Micro Hydrogen Sensor Based on Pd-Ag Nanofilm

Flexible and Highly Sensitive Hydrogen Sensor Based on Organic Nanofibers Decorated by Pd Nanoparticles

Ultrasensitive and Wide-Range Flexible Hydrogen Sensor Based on Pd Nanoparticles Decorated Ultrathin SnO<sub>2</sub> Film

Highly Sensitive Hydrogen Sensor Based on a New Suspended Structure of Cross-Stacked Multiwall Carbon Nanotube Sheet

Flexible Hydrogen Sensor Based on Pd/TiO2 Nanofilm with Fast Response

Nanoparticle-functionalized microsensors for room-temperature hydrogen detection

W18O49 nanowire array driven by PdCu nanocrystals for chemiresistive hydrogen MEMS sensors

Self-Heated Hydrogen Gas Sensors Based on Pt-Coated W18o49 Nanowire Networks with High Sensitivity, Good Selectivity and Low Power Consumption

Surface-broken palladium and palladium oxide core/shell nanowires for stable hydrogen sensing at room temperature

Rapid response for hydrogen detection based on macropore gas diffusion channel of PdO–NiO/porous GaN p-n junctions

Substantially Accelerated Response and Recovery in Pd‐Decorated WO3 Nanorods Gasochromic Hydrogen Sensor

Low detection based on Pd Pt /In2O3 nanospheres for rapid hydrogen detection

Nano‐Patterned CuO Nanowire Nanogap Hydrogen Gas Sensor with Voids

The effects of Ni contents on hydrogen sensing response of closely spaced Pd–Ni alloy nanoparticle films