Abstract:Most solid electrolytes (SEs) which are promising for all-solid-state battery (ASSB) applications are known to have a narrow electrochemical stability window. Consequently, parasitic electrolyte reactions are observed when high-energy-density electrode materials such as lithium and silicon are employed, hindering their utilization in commercial battery systems. Therefore, it is crucial to understand at which potentials such reactions start, and which chemical species are present in the subsequently formed solid electrolyte interphase (SEI). Herein, a new operando experimental approach is introduced to investigate such reactions by employing hard X-ray photoelectron spectroscopy (HAXPES). This approach enables the examination of the SEI formed below a thin metal film (e.g., 6 nm nickel) acting as the working electrode. The feasibility of this approach is demonstrated using a sulfide-based Li6PS5Cl solid electrolyte (lithium argyrodite). It is shown that electrolyte reduction reactions start upon polarization of the working electrode to voltages below 1.75 V (vs. Li+/Li) and result in considerable Li2S formation, particularly in the voltage range of 1.5 – 1.0 V. The overall intensity trends confirm the heterogeneous/layered microstructure of the SEI (e.g., preferential Li2O and Li2S deposition near the current collector). The reversibility of side reactions is also observed, as Li2O and Li2S decompose in the 2–4 V potential window, generating oxidized sulfur species, sulfites and sulfates. The introduced experimental approach is promising for the spectroscopic investigation of electrolyte side reactions under dynamic conditions for various solid electrolyte and current collector combinations.

In situ XPS investigation of the SEI formed on LGPS and LAGP with metallic lithium

Virtual Electrode plating XPS Investigation of the Solid Electrolyte Interphase formed between Li Metal Anode and LGPS and LAGP Solid Electrolytes

In Situ Analysis of Interfacial Morphological and Chemical Evolution in All‐Solid‐State Lithium‐Metal Batteries

X-ray Photoelectron Spectroscopy Probing of the Interphase Between Solid-State Sulfide Electrolytes and a Lithium Anode

Effect of current density on the solid electrolyte interphase formation at the lithium∣Li6PS5Cl interface

Nanoscale Visualization of Lithium Plating/Stripping Tuned by On‐site Formed Solid Electrolyte Interphase in All‐Solid‐State Lithium‐Metal Batteries

Operando Photoelectron Spectroscopy Analysis of Li6PS5Cl Electrochemical Decomposition Reactions in Solid-State Batteries

In Situ X-ray Photoelectron Spectroscopy Investigation of the Solid Electrolyte Interphase in a Li/Li6.4Ga0.2La3Zr2O12/LiFePO4 All-Solid-state Battery

Insights into solid electrolyte interphase formation on alternative anode materials in lithium-ion batteries

Operando X-ray Absorption Spectroscopy Reveals Solid Electrolyte Interphase Formation on Silicon Anodes for Li-ion Batteries

In Situ and Quantitative Characterization of Solid Electrolyte Interphases

Operando observation of the dynamic SEI formation on a carbonaceous electrode by Near-Ambient Pressure XPS

Investigation of the Electrode/Ionic Liquid Interphase: Chemical Reactions of an Ionic Liquid and a Lithium Salt with Lithiated Graphite Probed by X-ray Photoelectron Spectroscopy

Direct in-situ measurement of electrical properties of solid electrolyte interphase on lithium metal anode

Operando Electrochemical Liquid Cell Scanning Transmission Electron Microscopy Investigation of the Growth and Evolution of the Mosaic Solid Electrolyte Interphase for Lithium-Ion Batteries

Lithium Dendrite Suppression and Enhanced Interfacial Compatibility Enabled by an Ex Situ SEI on Li Anode for LAGP-Based All-Solid-State Batteries

In-situ Analysis of Solid-Electrolyte Interphase Formation and Cycle Behavior of Sn Battery Anodes

Unveiling the Stable Nature of the Solid Electrolyte Interphase between Lithium Metal and LiPON via Cryogenic Electron Microscopy

Stabilizing the LAGP/Li Interface and in Situ Visualizing the Interfacial Structure Evolution for High-Performance Solid-State Lithium Metal Batteries

TPD–GC/MS analysis of the solid electrolyte interface (SEI) on a graphite anode in the propylene carbonate/ethylene sulfite electrolyte system for lithium batteries

Size-Dependent Chemomechanical Failure of Sulfide Solid Electrolyte Particles during Electrochemical Reaction with Lithium