Abstract:The paper is concerned with the evaluation of laser-treated cementitious surfaces. It is part of a bigger investigation into the laser cleaning procedure and its impact on the change of the Nano particles of cementitious composites and concrete member structures. Because of the wide range of absorptivity of highly developed surfaces of concrete members and cementitious materials, their reactions to laser irradiation varied significantly. Even while laser could effectively remove the particles from the surface of concrete members, there are usually some residual surface modifications related with mortar removing, fracture development, and glazing (melted mortar). In this study, a large amount of thermal stress is created with low power densities (300 W/cm 2 ) and large spot sizes (50 mm) that promote structural concrete member cracking. By raise of power density, the cement matrix material melts make the thermal ablation mode ineffective. This procedure is also heavily influenced by the beam diameter to aggregate size rate. As a result, due to stable size of aggregate, the procedure is not scalable. In this study, the findings of ablation experiments on cement and concrete member specimens performed with a Yb-fiber laser with a power of 1 kW and a focused beam width of 800 m have been delivered through fiber optic beam delivery. In order to know the influence of substrate composition on ablation ratio and processes, the laser–surface interaction was examined on type I Portland cement with varying amounts of sand or fine silica. The primary objective is to maximize the material removal rate (MRR) and aspect proportion of alumina, stainless steel, and chromium (Cr). The goal of this study is to use an adaptive neural fuzzy inference system (ANFIS) to categorize the multiple input variables for MRR and ratios based on process variables. Scanning speed, annealing temperature, laser power, and laser frequency are all input parameters. The prediction might be crucial in determining the ideal circumstances for micro and Nano architectures of concrete members created by laser ablation. According to the data, annealing power has the greatest impact on aspect ratio, whereas micro structure width has the most effect on MRR. Analysis revealed that contaminants of alumina, stainless steel, and chromium (Cr) were highly segregated into distinct areas of the aerosol's particle size distribution.

Simulation on mass removal by recoil pressure, thermal stress, and bubble growth of concrete irradiated by a millisecond Nd: YAG pulsed laser.

Monte Carlo/molecular Dynamics Simulation on Melting and Evaporating Processes of Material Due to Laser Irradiation

Analysis of nano-particle release from the surface of structural concrete members by laser ablation using soft computing

Combined Continuum-Atomistic Modeling of Ultrashort-Pulsed Laser Irradiation of Silicon

On the Properties of Plastic Ablators in Laser-Driven Material Dynamics Experiments

Subpicosecond laser ablation behavior of magnesium target and crater evolution: Molecular dynamics study and experimental validation

Molecular Dynamics Simulation on Femtosecond Laser Ablation of Metal

Simulation and experimental study of the evolution of shock waves during laser paint removal

Delayed Phase Explosion During High-Power Nanosecond Laser Ablation of Silicon

Laser based surface treatment of bioactive glass: Dependence on pulsed laser ablation

Simulation of evaporation ablation dynamics of materials by nanosecond pulse laser of Gaussian beam and flat-top beam

Model-based simulations of pulsed laser ablation using an embedded finite element method

Simulation of Vaporization in Low Fluence Nanosecond Laser Ablation of Aluminum Alloy

A comparative study on the characteristics of nanosecond laser ablation zinc and acrylonitrile butadiene styrene targets

Hybrid Atomistic-Macroscale Modeling of Long-Time Phase Change in Nanosecond Laser–material Interaction

Nanosecond pulsed laser ablation of silicon—finite element simulation and experimental validation

Molecular dynamics study of electronic temperature effects on the laser ablation of silicon

Numerical and experimental analysis of dynamic process of laser ablation epoxy resin

Numerical simulation on nanosecond laser ablation of titanium considering plasma shield and evaporation-affected surface thermocapillary convection

Experimental and Theoretical Investigation of Localized CO2 Laser Interaction with Fused Silica During the Process of Surface Damage Mitigation

3-D FEM simulation of laser shock processing