Electrically programmable adhesive hydrogels for climbing robots

Junwen Huang,Yu Liu,Yuxin Yang,Zhijun Zhou,Jie Mao,Tong Wu,Jun Liu,Qipeng Cai,Chaohua Peng,Yiting Xu,Birong Zeng,Weiang Luo,Guorong Chen,Conghui Yuan,Lizong Dai

DOI: https://doi.org/10.1126/scirobotics.abe1858

IF: 25

2021-04-28

Science Robotics

Abstract:Hydrogels offer an electrochemical route to adhesion control for robot climbers.

robotics

What problem does this paper attempt to address?

3D Printing of Octopi-Inspired Hydrogel Suckers with Underwater Adaptation for Reversible Adhesion

Yixian Wang,Desheng Liu,Chengshuo Wang,Jiayu Wu,Xin Xu,Xingxing Yang,Chufeng Sun,Pan Jiang,Xiaolong Wang

DOI: https://doi.org/10.1016/j.cej.2022.141268

2022-01-01

Abstract:Biological structures with reversible adhesion can be widely observed in nature. The current biomimetic adhesion system has attracted extensive interest yet remains the fundamental challenge in the reversible high-adhesion with good environment compatibility, especially underwater. Herein, inspired with octopus, we propose the hydrogel-based suckers with favorable mechanical performance achieved readily by digital light processing 3D printing of the Zr4+-coordinated hydrogels, leading to the excellent underwater adaptation due to the water permeability. In this case, hydrogel, as the typical soft material infilled with water, can effectively enhance the adhesion and stability by the interfacial water sealing in comparison with the traditional hydrophobic and dry materials. The optimized hydrogel sucker with the radius of 5 mm, inclination of 30°, and wall thickness of 1 mm exhibits the highest adhesive strength of 48.46 ± 3.93 kPa in air, and 57.19 ± 1.93 kPa under water by experimental and numerical demonstration. The hydrogel suckers also display good adhesion versatility to different materials, including metal, ceramic, plastic and tissue etc. Finally, a pneumatic hydrogel gripper integrated with the bioinspired suckers can efficiently capture objects under water and in air. This research provides a novel path to develop the intelligent adhesion systems and mobile devices/robots.
Electrically Programmable Interfacial Adhesion for Ultrastrong Hydrogel Bonding

Yaqian Liu,Pudi Wang,Xing Su,Liang Xu,Zhuoling Tian,Hao Wang,Guojun Ji,Jianyong Huang

DOI: https://doi.org/10.1002/adma.202108820

IF: 29.4

2022-02-21

Advanced Materials

Abstract:Adjustable interfacial adhesion is of great significance in smart-hydrogel-related engineering fields. This study presents an electroadhesion strategy for universal and ultrastrong hydrogel bonding with electrically programmable strength. An ionic hydrogel containing lithium ions is designed to achieve hydrated-ion-diffusion-mediated interfacial adhesion, where external electric fields are employed to precisely control spatiotemporal dynamics of the ion diffusion across ionic adhesion region (IAR). The hydrogel can realize a universal, ultrastrong, efficient, tough, reversible, and environmentally tolerant electroadhesion to diverse hydrogels, whose peak adhesion strength and interfacial adhesion toughness are as high as 1.2 MPa and 3750 J m<sup>-2</sup> , respectively. With a mechanoelectric coupling model, the dominant role of the hydrated ions in IAR played in the interfacial electroadhesion is further quantitatively revealed. The proposed strategy opens a door for developing high-performance adhesion hydrogels with electrically programmable functions, which are indispensable for various emerging fields like flexible electronics and soft robotics.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Hybrid electrostatic and elastomer adhesion mechanism for wall climbing robot

Keng Huat Koh,M. Sreekumar,S.G. Ponnambalam

DOI: https://doi.org/10.1016/j.mechatronics.2016.02.001

IF: 3.379

2016-05-01

Mechatronics

Abstract:In this paper a hybrid solution to the problem of robots climbing on featureless surface is presented. The research focus of wall climbing robot is on the adhesion and the mechanism of locomotion. An efficient, robust, standalone and scalable mechanism is often desired for such robots to perform many critical tasks. The performance of electrostatic adhesion can be enhanced by using flexible and soft elastic material as the dielectric to improve its resistance against peeling force. A novel multiple stage fabrication process of the layered hybrid adhesive using blade coating technique is proposed in this work. This yields a track structure that is compliant on the surface, electrically functional, and geometrically controllable. When excited by high voltage, the track becomes an active actuator. It also passively adheres to smooth surfaces with the elastomer effect. Inspired by the climbing strategy of the gecko, a solution for track locomotion is proposed by utilizing electrostatic, elastomer adhesion and tail forces simultaneously. The biomimetic tail is implemented with torsion spring design. As a result, the robot prototype ELAD (electrostatic and elastomer adhesion) can climb a slope of 80° on smooth surfaces at speed of 4cm/s, and perch for more than 2h using on-board power. Effects of tail design and hybrid adhesion with force analysis are numerically evaluated and presented. It is also demonstrated that the elastomer material properties for the hybrid adhesive are suitable for stable climb on vertical surfaces. Further, analysis has shown that the hybrid adhesive is able to work on surfaces with roughness value Ra within 300nm.

robotics,automation & control systems,engineering, electrical & electronic, mechanical
Programming hydrogel adhesion with engineered polymer network topology

Zhen Yang,Guangyu Bao,Shuaibing Jiang,Xingwei Yang,Ran Huo,Xiang Ni,Luc Mongeau,Rong Long,Jianyu Li

2023-04-06

Abstract:Hydrogel adhesion that can be easily modulated in magnitude, space, and time is desirable in many emerging applications ranging from tissue engineering, and soft robotics, to wearable devices. In synthetic materials, these complex adhesion behaviors are often achieved individually with mechanisms and apparatus that are difficult to integrate. Here, we report a universal strategy to embody multifaceted adhesion programmability in synthetic hydrogels. By designing the surface network topology of a hydrogel, supramolecular linkages that result in contrasting adhesion behaviors are formed on the hydrogel interface. The incorporation of different topological linkages leads to dynamically tunable adhesion with high-resolution spatial programmability without alteration of bulk mechanics and chemistry. Further, the association of linkages enables stable and tunable adhesion kinetics that can be tailored to suit different applications. We rationalize the physics of chain slippage, rupture, and diffusion that underpins emergent programmable behaviors. We then incorporate the strategy into the designs of various devices such as smart wound patches, fluidic channels, drug-eluting devices, and reconfigurable soft robotics. Our study presents a simple and robust platform in which adhesion controllability in multiple aspects can be easily integrated into a single design of a hydrogel network.

Soft Condensed Matter
Programmable adhesion and morphing of protein hydrogels for underwater robots

Sheng-Chen Huang,Ya-Jiao Zhu,Xiao-Ying Huang,Xiao-Xia Xia,Zhi-Gang Qian

DOI: https://doi.org/10.1038/s41467-023-44564-6

IF: 16.6

2024-01-03

Nature Communications

Abstract:Abstract Soft robots capable of efficiently implementing tasks in fluid-immersed environments hold great promise for diverse applications. However, it remains challenging to achieve robotization that relies on dynamic underwater adhesion and morphing capability. Here we propose the construction of such robots with designer protein materials. Firstly, a resilin-like protein is complexed with polyoxometalate anions to form hydrogels that can rapidly switch between soft adhesive and stiff non-adhesive states in aqueous environments in response to small temperature variation. To realize remote control over dynamic adhesion and morphing, Fe 3 O 4 nanoparticles are then integrated into the hydrogels to form soft robots with photothermal and magnetic responsiveness. These robots are demonstrated to undertake complex tasks including repairing artificial blood vessel, capturing and delivering multiple cargoes in water under cooperative control of infrared light and magnetic field. These findings pave an avenue for the creation of protein-based underwater robots with on-demand functionalities.

multidisciplinary sciences
Robust Hydrogel Adhesion by Harnessing Bioinspired Interfacial Mineralization

Jun Zhang,Yaya Wang,Jiajun Zhang,Iek Man Lei,Guangda Chen,Yu Xue,Xiangyu Liang,Daozeng Wang,Guigen Wang,Sisi He,Ji Liu

DOI: https://doi.org/10.1002/smll.202201796

IF: 13.3

2022-07-09

Small

Abstract:Robust hydrogel adhesion is achieved by constructing a bioinspired mineralized transition layer through ion diffusion and subsequent mineral deposition. Hydrogels have gained intensive interest in biomedical and flexible electronics, and adhesion of hydrogels to substrates or devices is indispensable in these application scenarios. Although numerous hydrogel adhesion strategies have been developed, it is still challenging to achieve a hydrogel with robust adhesion interface through a universal yet simple method. Here, a strategy for establishing strong interfacial adhesion between various hydrogels and a wide variety of substrates (i.e., soft hydrogels and rigid solids, including glass, aluminum, PET, nylon and PDMS) even under wet conditions, is reported. This strong interfacial adhesion is realized by constructing a bioinspired mineralized transition layer through ion diffusion and subsequent mineral deposition. This strategy is not only generally applicable to a broad range of substrates and ionic pairs, but also compatible with various fabrication approaches without compromising their interfacial robustnesses. This strategy is further demonstrated in the application of single‐electrode triboelectric nanogenerators (TENG), where a robust interface between the hydrogel and elastomer layers is enabled to ensure a reliable signal generation and output.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Switchable Adhesion Actuator for Amphibious Climbing Soft Robot

Yichao Tang,Qiuting Zhang,Gaojian Lin,Jie Yin

DOI: https://doi.org/10.1089/soro.2017.0133

2019-02-06

Abstract:Climbing soft robots are of tremendous interest in both science and engineering due to their potential applications in intelligent surveillance, inspection, maintenance, and detection under environments away from the ground. The challenge lies in the design of a fast, robust, switchable adhesion actuator to easily attach and detach the vertical surfaces. Here, we propose a new design of pneumatic-actuated bioinspired soft adhesion actuator working both on ground and under water. It is composed of extremely soft bilayer structures with an embedded spiral pneumatic channel resting on top of a base layer with a cavity. Rather than the traditional way of directly pumping air out of the cavity for suction in hard polymer-based adhesion actuator, we inflate air into the top spiral channel to deform into a stable 3D domed shape for achieving negative pressure in the cavity. The characterization of the maximum shear adhesion force of the proposed soft adhesion actuator shows strong and rapid reversible adhesion on multiple types of smooth and semi-smooth surfaces. Based on the switchable adhesion actuator, we design and fabricate a novel load-carrying amphibious climbing soft robot (ACSR) by combining with a soft bending actuator. We demonstrate that it can operate on a wide range of foreign horizontal and vertical surfaces including dry, wet, slippery, smooth, and semi-smooth ones on ground and also under water with certain load-carrying capability. We show that the vertical climbing speed can reach about 286 mm/min (1.6 body length/min) while carrying over 200g object (over 5 times the weight of ACSR itself) during climbing on ground and under water. This research could largely push the boundaries of soft robot capabilities and multifunctionality in window cleaning and underwater inspection under harsh environment.

Applied Physics,Robotics
Reversing Hydrogel Adhesion Property via Firmly Anchoring Thin Adhesive Coatings

Haiyan Feng,Yanfei Ma,Zhizhi Zhang,Song Yang,Zhengfeng Ma,Yunlei Zhang,Shuanhong Ma,Bo Yu,Meirong Cai,Xiaowei Pei,Feng Zhou

DOI: https://doi.org/10.1002/adfm.202111278

IF: 19

2021-12-26

Advanced Functional Materials

Abstract:Hydrogels, exhibiting wide application prospects in soft robotics, tissue engineering, implantable electronics, etc., upon functioning often require to adhere to substrates especially in wet environments despite that most hydrogels are nonsticky because of their high water content and hydrophilicity. Herein, a strategy to rapidly reverse the adhesion properties of hydrogels via surface anchoring very thin adhesive coatings is reported. Inspired by mussel adhesion, poly(vinyl alcohol) hydrogel is first coated with polymerized tannic acid that chelates with Fe3+, which serves as the interface bonding layer. Subsequently, a wet adhesive poly(dopamine methacrylamide‐co‐methoxyethyl acrylate) is firmly anchored to form the very thin adhesive coating (<10 µm) that can generate high adhesion strength both in the air and underwater. The adhesive coating also endows hydrogels with high water retention capacity under warm condition (50 °C) and is able to get on‐demand functionalization on the designated area to achieve asymmetric adhesion, static and dynamic control over wettability. The strategy demonstrates potentials for broad applications from biomedicine to wearable electronics. One kind of novel underwater adhesive hydrogels with robust underwater adhesion performance is engineered by anchoring mussel‐protein‐inspired copolymer onto poly(vinyl alcohol) hydrogel surface with tannic acid/Fe3+ as bridge‐bonding layer. The adhesive hydrogels demonstrate good adhesion strengths both in dry and wet environments, cyclic adhesion performance, good water retention capacity, along with highly sensitive conductivity as artificial electronic skins.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Design of large-span stick-slip freely switchable hydrogels via dynamic multiscale contact synergy

Zhizhi Zhang,Chenxi Qin,Haiyan Feng,Yangyang Xiang,Bo Yu,Xiaowei Pei,Yanfei Ma,Feng Zhou

DOI: https://doi.org/10.1038/s41467-022-34816-2

IF: 16.6

2022-11-15

Nature Communications

Abstract:Abstract Solid matter that can rapidly and reversibly switch between adhesive and non-adhesive states is desired in many technological domains including climbing robotics, actuators, wound dressings, and bioelectronics due to the ability for on-demand attachment and detachment. For most types of smart adhesive materials, however, reversible switching occurs only at narrow scales (nanoscale or microscale), which limits the realization of interchangeable surfaces with distinct adhesive states. Here, we report the design of a switchable adhesive hydrogel via dynamic multiscale contact synergy, termed as DMCS-hydrogel. The hydrogel rapidly switches between slippery (friction ~0.04 N/cm 2 ) and sticky (adhesion ~3 N/cm 2 ) states in the solid-solid contact process, exhibits large span, is switchable and dynamic, and features rapid adhesive switching. The design strategy of this material has wide applications ranging from programmable adhesive materials to intelligent devices.

multidisciplinary sciences
Designing nanohesives for rapid, universal, and robust hydrogel adhesion

Zhao Pan,Qi-Qi Fu,Mo-Han Wang,Huai-Ling Gao,Liang Dong,Pu Zhou,Dong-Dong Cheng,Ying Chen,Duo-Hong Zou,Jia-Cai He,Xue Feng,Shu-Hong Yu

DOI: https://doi.org/10.1038/s41467-023-40753-5

IF: 16.6

2023-09-04

Nature Communications

Abstract:Abstract Nanoparticles-based glues have recently been shown with substantial potential for hydrogel adhesion. Nevertheless, the transformative advance in hydrogel-based application places great challenges on the rapidity, robustness, and universality of achieving hydrogel adhesion, which are rarely accommodated by existing nanoparticles-based glues. Herein, we design a type of nanohesives based on the modulation of hydrogel mechanics and the surface chemical activation of nanoparticles. The nanohesives can form robust hydrogel adhesion in seconds, to the surface of arbitrary engineering solids and biological tissues without any surface pre-treatments. A representative application of hydrogel machine demonstrates the tough and compliant adhesion between dynamic tissues and sensors via nanohesives, guaranteeing accurate and stable blood flow monitoring in vivo. Combined with their biocompatibility and inherent antimicrobial properties, the nanohesives provide a promising strategy in the field of hydrogel based engineering.

multidisciplinary sciences
Wet Adhesion Inspired Bionic Climbing Robot

Bin He,Zhipeng Wang,Minghe Li,Kun Wang,Runjie Shen,Sanqing Hu

DOI: https://doi.org/10.1109/tmech.2012.2234473

2014-01-01

IEEE/ASME Transactions on Mechatronics

Abstract:Arthropods like stick insects have remarkable locomotion performance to climb vertical surfaces with their wet adhesion pads. This paper focuses on the development of a novel wet adhesion pad for wall-climbing robots that can scale walls. According to the morphology of insects' pads, mechanism of wet adhesive is analyzed. A novel wet adhesive pad with microstructure based on combining electroforming process with soft lithography is explored. Characteristic test results show that microstructures on the surface of pads fabricated by the proposed technique can improve the wet adhesive ability effectively. The design, manufacture, and test of a hexapod climbing robot prototype are also discussed. Experimental results show that the climbing ability of the robot with the pads is exceptional; the robot can climb up to more than 80. sloped surface and stick to the vertical surface statically.
Flexible Control and Coupling of Adhesion and Friction of Gecko Setal Array During Sliding

Yu Tian,Dashuai Tao,Noshir Pesika,Jin Wan,Yonggang Meng,Xiangjun Zhang

DOI: https://doi.org/10.2474/trol.10.106

2015-01-01

Tribology Online

Abstract:Gecko has remarkable ability to control its adhesion and friction during running to realize a swift climbing or running on vertical walls or upside down ceilings. This ability has received considerable interest of researchers. During the recent decade, significant progress has been made in understanding the mechanism and the biomimetic fabrication of gecko-inspired dry adhesives. While people generally desire a strong and reversible adhesion property, this article described the progress in the investigation of the properties of gecko hierarchical structures, and the corresponding theoretical understandings, and then presented our recent progresses on the flexible controlled adhesion and friction of gecko surface and biomimetic surfaces and a demonstration of a hybrid clamp to ascertain the mechanical property of control principles is also involved. Gecko-inspired adhesives with flexibly controlled adhesion and friction performances have been developed. Macroscopic sliding of those adhesive surfaces with anisotropic hierarchical microscopic structures in a desired direction could be carried out and engage or disengage a flexible control of strong adhesion and friction, and acquire an “intelligent” adhesion.
Design, fabrication and characterization of gecko inspired micro-fibrillar adhesive materials for wall climbing robots

W. Tan,Yanyu Gu,Chuang Zhang,Yiwei Zhang,Xiaobin Yu,Lianchao Yang,Ruiqian Wang

DOI: https://doi.org/10.1109/CBS55922.2023.10115372

2023-03-24

Abstract:Advancement in adhesion technology has improved the development of wall-climbing robots. But there are still some challenges in the optimization of high adhesion strength bioinspired adhesives. Most of the traditional wall-climbing robot feet use vacuum suction and magnetic suction, which require smooth contact surfaces and magnetic permeability respectively, and their application scenarios are greatly limited. Therefore, new biomimetic adsorption methods need to be developed. Adhesives in air, inspired by geckos and spiders and other climbing animals in nature, adhere to the opposite surfaces using van der Waals forces. The biofiber-dried adhesives have a tree-like hierarchy: on the surface of the animal’s foot has a thin film of arrays of microfibers, each is divided into smaller arrays of submicron fibers. These nanosized fibril can bind tightly to opposite surfaces to induce van der Waals interactions. The van der Waals forces cause these nanosized fibril arrays to bind tightly to surfaces. Bionic studies based on gecko and spider adhesion mechanism has become a fierce research subject in the past few years. Previous studies have confirmed that finer contact structures produce higher adhesion. The influence of tip shape on the performance of adhesives of single fiber and fiber array is also a focus of research. In this work, in order to enhance the adhesion of biomimetic materials, patterned surfaces with micro-columns with different tip shapes are prepared by lithography and micromolding methods. We measured their normal adhesion and compared with flat contact surface. Micro pattern surface was found to be better than flat surface smooth. Different shape has a significant effect on adhesive force. A prestressing force of adhesive force and dependency has been identified and that is a key to obtain the adhesion force, which can provide the possibility to expand the application scenarios of wall-climbing robots and exists many potential applications from wall-climbing robots to bionic patches.

Computer Science,Engineering,Materials Science
Additive manufacturing of flexible 3D surface electrodes for electrostatic adhesion control and smart robotic gripping

Dong Geun Kim,Hyeongmin Je,A. John Hart,Sanha Kim

DOI: https://doi.org/10.1007/s40544-022-0691-9

IF: 4.924

2023-06-01

Friction

Abstract:Abstract Mechanically flexible surface structures with embedded conductive electrodes are attractive in contact-based devices, such as those used in reversible dry/adhesion and tactile sensing. Geometrical shapes of the surface structures strongly determine the contact behavior and therefore the resulting adhesion and sensing functionalities; however, available features are often restricted by fabrication techniques. Here, we additively manufacture elastomeric structure arrays with diverse angles, shapes, and sizes; this is followed by integration of conductive nanowire electrodes. The fabricated flexible three-dimensional (3D) surface electrodes are mechanically compliant and electrically conductive, providing multifunctional ability to sense touch and to switch adhesion via a combined effect of shear- and electro adhesives. We designed soft, anisotropic flexible structures to mimic the gecko’s reversible adhesion, which is governed by van der Waals forces; we integrated nanowires to further manipulate the localized electric field among the adjacent flexible 3D surface electrodes to provide additional means to digitally tune the electrostatic attraction at the contact interface. In addition, the composite surface can sense the contact force via capacitive sensing. Using our flexible 3D surface electrodes, we demonstrate a complete soft gripper that can grasp diverse convex objects, including metal, ceramic, and plastic products, as well as fresh fruits, and that exhibits 72% greater electroadhesive gripping force when voltage is applied.

engineering, mechanical
Bio-inspired adhesive and self-healing hydrogels as flexible strain sensors for monitoring human activities

Zijian Gao,Yifan Li,Xiaoling Shang,Wei Hu,Guanghui Gao,Lijie Duan

DOI: https://doi.org/10.1016/j.msec.2019.110168

Abstract:Nowadays, hydrogels have been intensively explored due to their promising potential application in bioelectronics. However, the lack of self-healing performance limits the lifespan and stability of materials. Here, a stretchable, self-healing and conductive hydrogel is prepared via physical crosslinking including hydrogen bonding, hydrophobic association and complexation effect, endowing the hydrogels with stretchability of 1150%, tensile strength of 112 kPa, flexibility and puncture resistance. Besides, the hydrogels possess extraordinary conductive property with a conductivity of 0.0720 S cm-1 and exhibit stable changes of resistance signals with a gauge factor of 2.506. Meanwhile, the hydrogels also exhibit adhesive performance due to the presence of catechol groups, and the maximum peeling adhesive strength could reach 23 N m-1. It is envisioned that the highly stretchable, self-healable, adhesive and conductive hydrogels would widen the application as the flexible strain sensors for soft robots, artificial limb, movement-monitoring equipment.
Mussel-Inspired Wet-Adhesive Multifunctional Organohydrogel with Extreme Environmental Tolerance for Wearable Strain Sensor

Zhenling Shang,Guoqiang Liu,Yue Sun,Chenghao Li,Nan Zhao,Zhuo Chen,Ruisheng Guo,Zijian Zheng,Feng Zhou,Weimin Liu

DOI: https://doi.org/10.1021/acsami.3c10213

IF: 9.5

2023-09-06

ACS Applied Materials & Interfaces

Abstract:As a flexible artificial material, the conductive hydrogel has broad application prospects in flexible wearable electronics, soft robotics, and biomedical monitoring. However, traditional hydrogels still face many challenges, such as long-term stability, availability in extreme environments, and long-lasting adhesion to the skin surface under sweaty or humid conditions. To circumvent the above issues, one kind of ionic conductive hydrogel was prepared by a simple one-pot method that dissolved...

materials science, multidisciplinary,nanoscience & nanotechnology
Bio-Inspired Instant Underwater Adhesive Hydrogel Sensors

Shaoshuai He,Bingyan Guo,Xia Sun,Mingyue Shi,Hong Zhang,Fanglian Yao,Hong Sun,Junjie Li

DOI: https://doi.org/10.1021/acsami.2c13371

2022-10-12

Abstract:Underwater adhesion plays an essential role in soft electronics for the underwater interface. Although hydrogel-based electronics are of great interest, because of their versatility, water molecules prevent hydrogels from adhering to substrates, thus bottlenecking further applications. Herein, inspired by the barnacle proteins, MXene/PHMP hydrogels with strong repeatable underwater adhesion are developed through the random copolymerization of 2-phenoxyethyl acrylate, 2-methoxyethyl acrylate, and N-(2-hydroxyethyl) acrylamide with the presence of MXene nanosheets. The hydrogels are mechanically tough (elastic modulus of 32 kPa, fracture stress of 0.11 MPa), and 2-phenoxyethyl acrylate (PEA) with aromatic groups endows the hydrogel with nonswelling property and prevents water molecules from invading the adhesive interface, rendering the hydrogels an outstanding adhesive behavior toward various substrates (including glass, iron, polyethylene terephthalate (PET), porcine). Besides, dynamic physical interactions allow for instant and repeatable underwater adhesion. Furthermore, the MXene/PHMP hydrogels exhibit a high conductivity (0.016 S/m), fast responsiveness, and superior sensitivity as a strain sensor (gauge factor = 7.17 at 200%-500% strain) and pressure sensor (0.63 kPa-1 at 0-70 kPa). The underwater applications of bionic hydrogel-based sensors have been demonstrated, such as human motion, pressure sensing, and holding objects. It is anticipated that the instant and repeatable underwater adhesive hydrogel-based sensors extend the underwater applications of hydrogel electronics.
Nanohydrogel Brushes for Switchable Underwater Adhesion

Shuanhong Ma,Michele Scaraggi,Peng Lin,Bo Yu,Daoai Wang,Daniele Dini,Feng Zhou

DOI: https://doi.org/10.1021/acs.jpcc.7b01305

2017-01-01

The Journal of Physical Chemistry C

Abstract:In nature, living systems commonly adopt the switchable friction/adhesion mechanism during locomotion. For example, geckos can move on ceilings, relying on the reversible attachment and detachment of their feet on substrate surfaces. Inspired by this scientists have used different materials to mimic natural dynamic friction/adhesion systems. However, synthetic systems usually cannot work in water environments and are also limited to single-contact interfaces, while nature has provided living systems with complex features to perform energy dissipation and adhere on multiple contact interfaces. Here, for the first time, we report the design, synthesis, and testing of a novel double-sided synthetic construct that relies on nanohydrogel brushes to provide simultaneous friction switching on each side of the membrane that separates the nanohydrogel fibers. This highly tunable response is linked to the swelling and shrinkage of the brushes in basic/acid media. Such a system shows three different friction states, which depend on the combination of pH control of the two membrane sides. Importantly, each side of the membrane can independently provide continuous but stable friction switching from high to ultralow friction coefficients in a wet environment under high load conditions. An in-depth theoretical study is performed to explore the mechanisms governing the hydration state responsible for the observed switching. This novel design opens a promising route for the development of new solutions for intelligent devices, which can adapt to multistimulusresponsive complex environments.
A Hydra Tentacle-Inspired Hydrogel with Underwater Ultra-Stretchability for Adhering Adipose Surfaces

Hao Wang,Xing Su,Zhihua Chai,Zhuoling Tian,Wenyue Xie,Yanxia Wang,Zhuo Wan,Meigui Deng,Zuoying Yuan,Jianyong Huang

DOI: https://doi.org/10.1016/j.cej.2021.131049

IF: 15.1

2021-01-01

Chemical Engineering Journal

Abstract:Adhesive hydrogels hold great significance in various biomedical applications. However, the maintenance of high extensibility and adhesion to adipose matters still remain challenging. Inspired by hydra tentacles, we utilise flexible polymeric ionic crosslinkers for constructing densely crosslinked networks. The derived hydrogel was ultra-stretchable (over 54 times) even in the fully swollen state in water. Due to dense electrostatic bonding sites and hydrophobic phases, it displayed fast (-30 sec), repeatable and long-lasting (over 14 days) underwater adhesion to adipose surfaces such as fat, octopus and fish epidermis in aqueous environments. Moreover, the excellent cytocompatibility and antibacterial ability made it suitable for a variety of applications related to biomedicine and flexible electronics. This biomimetic work addresses new possibility for the design rationale for highly stretchable and lipophilic underwater adhesives.
Advances and Challenges of Hydrogel Materials for Robotic and Sensing Applications

Yi Ouyang,Gaoshan Huang,Jizhai Cui,Hong Zhu,Guanghui Yan,Yongfeng Mei

DOI: https://doi.org/10.1021/acs.chemmater.2c01960

IF: 10.508

2022-10-18

Chemistry of Materials

Abstract:Hydrogels are soft materials composed of a three-dimensional (3D) hydrophilic polymer network filled with a large amount of water. Different from rigid machines, hydrogel-based robots are encoded with energy conversion mechanisms that allow sensing, adaption, transformation, and response in complex environments. In this perspective, we discuss the advances and challenges of hydrogel materials for soft robotic and sensing applications. In the first part, we introduce stimuli-responsive hydrogel sensors that can receive external energy inputs from different stimuli and translate them into in the geometrical, optical, electrical, and biological output signals. Then, we comprehensively discuss the recent development of hydrogel robot systems that exploit the responsive properties to achieve diverse locomotion models and functions. On the basis of the distinct driving force and locomotion mechanisms, we categorize hydrogel robots into two main kinds: one is the active robot that deforms by stimuli-responsive swelling of soft hydrogels, and the other is the passive motor that is propelled by reactive matters. We compare the advantages and challenges of each strategy and show how to transform biomimetic principles into technological capabilities through material and structural designs. We finally provide a critical perspective on the key challenges in the integration of functionality in hydrogel robotic systems and reasonable directions to push hydrogel robots toward diverse applications.

materials science, multidisciplinary,chemistry, physical

Electrically programmable adhesive hydrogels for climbing robots

3D Printing of Octopi-Inspired Hydrogel Suckers with Underwater Adaptation for Reversible Adhesion

Electrically Programmable Interfacial Adhesion for Ultrastrong Hydrogel Bonding

Hybrid electrostatic and elastomer adhesion mechanism for wall climbing robot

Programming hydrogel adhesion with engineered polymer network topology

Programmable adhesion and morphing of protein hydrogels for underwater robots

Robust Hydrogel Adhesion by Harnessing Bioinspired Interfacial Mineralization

Switchable Adhesion Actuator for Amphibious Climbing Soft Robot

Reversing Hydrogel Adhesion Property via Firmly Anchoring Thin Adhesive Coatings

Design of large-span stick-slip freely switchable hydrogels via dynamic multiscale contact synergy

Designing nanohesives for rapid, universal, and robust hydrogel adhesion

Wet Adhesion Inspired Bionic Climbing Robot

Flexible Control and Coupling of Adhesion and Friction of Gecko Setal Array During Sliding

Design, fabrication and characterization of gecko inspired micro-fibrillar adhesive materials for wall climbing robots

Additive manufacturing of flexible 3D surface electrodes for electrostatic adhesion control and smart robotic gripping

Bio-inspired adhesive and self-healing hydrogels as flexible strain sensors for monitoring human activities

Mussel-Inspired Wet-Adhesive Multifunctional Organohydrogel with Extreme Environmental Tolerance for Wearable Strain Sensor

Bio-Inspired Instant Underwater Adhesive Hydrogel Sensors

Nanohydrogel Brushes for Switchable Underwater Adhesion

A Hydra Tentacle-Inspired Hydrogel with Underwater Ultra-Stretchability for Adhering Adipose Surfaces

Advances and Challenges of Hydrogel Materials for Robotic and Sensing Applications