A liquid-cooled plate based on bionic flow channels evolved from the shape of leaf veins and tree roots
Hanxu Xia,Jun Wang,Yan Shen,Kai Fang
DOI: https://doi.org/10.1016/j.ijthermalsci.2024.109468
IF: 4.779
2024-10-11
International Journal of Thermal Sciences
Abstract:With the rapid development of lithium-ion (Li-ion) batteries, battery thermal management (BTMS) is increasingly essential for the temperature control of Li-ion batteries. The energy required to control temperature is coming into focus. In order to consume less energy to control temperature and improve temperature uniformity, the liquid-cooled plate (LCP) based on bionic flow channels evolved from the shape of leaf veins and tree roots is proposed. In this BLCP, different from the others BLCPs, it is divided into a reinforced heat exchange area located in the middle and back part of the plate and a normal area located in the front part of the plate. Firstly, 16 sets of orthogonal tests are conducted based on four parameters: the distance of the hexagon from the outlet (a), the distance from the inlet (b), the distance between two adjacent hexagons (c) and the size of the hexagon (d). Secondly, Optimization was investigated based on NSGA-II for two objectives: temperature and pressure drop. The simulation results are analyzed based on the optimized structural parameters (a = 30 mm, b = 8 mm, c = 50 mm and d = 90 mm). After Comparing the optimization results with the simulation results, the temperature and pressure drop errors were 0.56 percent and 3.8 percent, respectively. The effects of flow rate and thickness of the fluid domain on temperature and pressure drop are next discussed separately. Finally, after comparing the optimized bionic liquid cooling plate (BLCP) with the conventional liquid cooling plate (CLCP) based on temperature pressure drop, velocity, and synergy angle, conclusions are made at the same inlet width, height, flow rate, and velocity (V = 0.2 m/s). This leads to the criterion of energy loss becoming only the pressure drop. The BLCP for pressure drop is 14.2 percent lower than the CLCP, which means less energy loss. The maximum temperature of the BLCP is 0.7 °C lower than that of the CLCP. Furthermore, the former has a better ability to suppress the rate of temperature rise and better temperature uniformity. In addition, this proposed new structure and research methods can be applied to the subsequent study of LCP.
engineering, mechanical,thermodynamics