Abstract:Self-assembling polydopamine has shown great versatility as a multifunctional surface coating. This study investigates the adhesive properties of polydopamine used to bind electroless copper films to several polymer substrates widely used for commercial applications, including polyethylene (PE), polycarbonate (PC), poly(methyl methacrylate) (PMMA), and nylon 6,6. Each substrate was coated in a similar manner resulting in continuous copper films of 52±12nm in thickness. Transmission electron microscopy revealed a non-preferential polycrystalline microstructure of copper grains averaging 53±17nm in diameter with a range of 21nm to 123nm, indicating there is some overlap of grains in the film. Peel testing, tensile tests, and tribological oscillating wear tests were used to characterize the mechanical performance of the adhered copper films. The nylon substrate had the highest peel strength, 49±5mN/mm, while the remaining substrates ranged from 5 to 13mN/mm on average. Coated substrates were strained up to 20% tensile strain to investigate film delamination, buckling, and rupture. Transverse buckling of the films relative to the direction of strain was observed due to Poisson's effect during tension. Films on nylon substrates resisted buckling and rupture up to 20% strain, whereas buckling, delamination, and rupture was observed in the other substrates below 20% strain. Tribological testing revealed that the coefficient of friction was governed by the polymer substrate and was not dependent upon the polydopamine or copper films. As a demonstration of the robust nature of this method, a nylon suture was coated with polydopamine-adhered copper film and tied in a knot to show a large complex deformation state without showing signs of delamination.

Mechanical properties of polydopamine (PDA) thin films

Microtribological and Electrochemical Corrosion Behaviors of Polydopamine Coating on Apts-Sam Modified Si Substrate

Polydopamine Films with 2D-like Layered Structure and High Mechanical Resilience

Construction and Study on Corrosion Protective Property of Polydopamine-Based 3-Layer Organic Coatings on Aluminum Substrate

Structure Evolution and Thermoelectric Properties of Carbonized Polydopamine Thin Films

Surface Characteristics of A Self-Polymerized Dopamine Coating Deposited on Hydrophobic Polymer Films

Insights into the Aggregation/Deposition and Structure of a Polydopamine Film

Synthesis and characterization of polydopamine‐derived carbon materials with enhanced thermoelectric performance

Rapidly-Deposited Polydopamine Coating via High Temperature and Vigorous Stirring: Formation, Characterization and Biofunctional Evaluation

Structural Modifications on Dopamine Molecules toward Polydopamine Applications

Characterization and mechanical testing of polydopamine-adhered electroless copper films

Polydopamine Ultrathin Film Growth on Mica via In-Situ Polymerization of Dopamine with Applications for Silver-Based Antimicrobial Coatings

Micro-Structured Polydopamine Films via Pulsed Electrochemical Deposition

Molecular Investigation of the Self-Assembly Mechanism Underlying Polydopamine Coatings: The Synergistic Effect of Typical Building Blocks Acting on Interfacial Adhesion

Scalable polydopamine coatings with increased thickness and stability using polyamidoamine dendrimers

Optimized interfacial compatibility of carbon fiber and epoxy resin via controllable thickness and activated ingredients of polydopamine layer

PDA modification and properties of α-AlH3

Polydopamine Nanomaterials: Recent Advances in Synthesis Methods and Applications

Simple-effective strategy for surface modification via annealing treatment polydopamine coating

Direct Evidence for the Polymeric Nature of Polydopamine

Polydopamine Coated on Aluminum Powders and Its Disperse Stability in HTPB