Abstract:Linear ultrasonic (LU) techniques used by majority of the researchers working in material damage monitoring, are reliable for detecting relatively large defects. If the defect dimensions are in the range of the ultrasonic wavelength or larger, then those defects can be detected by analyzing the scattered ultrasonic fields. Material damage affects LU parameters such as ultrasonic wave speed and attenuation and their changes are detectable for relatively large defects. However, for small defects (when defect dimensions are significantly smaller than the wavelength of the propagating signal) the changes in the LU parameters are too small to detect or measure reliably. For detecting small defects engineers often use high frequency ultrasonic signals to make the defect dimensions greater than the wavelength. However, high frequency signals attenuate quickly and therefore, only very small regions near the ultrasonic probe can be inspected in this manner. Inspecting large structures by high frequency ultrasonic signals requires moving the probe mechanically from one point to the next and therefore, can be very time consuming. Nonlinear ultrasonic (NLU) technique on the other hand does not need to satisfy this restricting condition that the wavelength of the signal must be smaller than the defect size. NLU works well when the signal wavelength is much larger than the defect size. Therefore, relatively low frequency signals that can propagate a long distance and monitor a large area of a structure can be used for NLU measurements. Different NLU techniques can be used for detection and monitoring of small damages in a specimen. A relatively new NLU technique called the Sideband Peak Count-Index or SPC-I technique has been developed by the author and his collaborators. SPC-I technique for monitoring different types of materials – composites, metals, concrete, and other cement-based materials has been found to be effective. Along with those success stories of SPC-I the effect of topography and the advantage of topological sensing is also discussed in this presentation.

Ultrasonic signal modality: A novel approach for concrete damage evaluation

Ultrasonic and impact spectroscopy monitoring on internal sulphate attack of cement-based materials

Concrete damage evolution analysis by backscattered ultrasonic waves

Use of Non-Linear Ultrasonic Techniques to Detect Cracks Due to Steel Corrosion in Reinforced Concrete Structures

Experimental Characterization of Sulfate Damage of Concrete Based on the Harmonic Wave Modulation Technique

Linear and nonlinear ultrasonics for material damage evaluation and health monitoring

Ultrasonic Testing Algorithm to the Surface Damage of Fire-Damaged Concrete

Development of a novel approach to detect damage in concrete structures with millimeter wave radar assessment system

Nondestructive Assessment of Microcracks Detection in Cementitious Materials Based on Nonlinear Ultrasonic Modulation Technique

Nonlinear ultrasonic imaging of damage in composite materials using a higher harmonic and modulated multi-path reciprocal method

Rapid Evaluation of Compressional Damage in Concrete Using Air-coupled Nonlinear Resonance Frequency Shift Technique

An Improved Ultrasonic Computerized Tomography (UCT) Technique for Damage Localization Based on Compressive Sampling (CS) Theory

Vibro-acoustic modulation and data fusion for localizing alkali–silica reaction–induced damage in concrete

DETECTION OF CONCRETE DAMAGE USING NONLINEAR IMPACT RESONANCE ACOUSTIC SPECTROSCOPY

Nondestructive evaluation of rebar corrosion in concrete structures using ultrasonics and laser-based sensing

Concrete damage nonlinear detection based on embedded ultrasonic sensors

Guided Waves for Damage Detection in Rebar-Reinforced Concrete Beams

Sideband Peak Count – a new nonlinear ultrasonic technique for monitoring damage progression in engineering materials

Analysis of Damage Evolution in Concrete under Fatigue Loading by Acoustic Emission and Ultrasonic Testing

Damage Area Evaluation Using a New and Simple Signal-Processing Algorithm in the Ultrasonic Wave Propagation Visualization Technique

Smart Concrete Slabs with Embedded Tubular PZT Transducers for Damage Detection