Abstract:Abstract Pectin is an industrial raw material that can form gels, thickeners, and emulsifiers widely applied in the food and non-food industries. Extracting pectin with citric acid solvent using ultrasonic waves is considered more effective and efficient. This study aimed to obtain an optimization model for the pectin production process to produce maximum pectin yield and obtain the optimized pectin characteristics. This study used the Response Surface Methodology (RSM) as the optimization method with the Central Composite Design (CCD) experimental design with Design Expert 13 software to determine the treatment combination based on time factors and solvent concentration. The treatment combination obtained was 11. The results showed that the maximum pectin yield value was 34.63% at a 7-minute extraction time using the citric acid solvent concentration of 20% and a validation value accuracy of 99.08%. The optimized pectin characteristics were a water content of 7.66%, ash content of 0.33%, equivalent weight of 183.28 mg, methoxyl content of 7.52%, galacturonic acid content of 67.13%, and degree of esterification of 63.56%. The pectin produced followed the pectin quality standards according to the International Pectin Producers Association (IPPA), except for the equivalent weight. Keywords: extraction, lemon albedo, pectin, ultrasonic Abstrak Pektin merupakan bahan baku industri yang memiliki kemampuan dalam pembentukan gel, zat pengental, dan sebagai zat pengemulsi yang banyak diaplikasikan pada industri pangan dan non-pangan. Proses ekstraksi pektin dengan pelarut asam sitrat menggunakan bantuan gelombang ultrasonik dianggap lebih efektif dan efisien. Tujuan penelitian adalah untuk mendapatkan model optimasi proses produksi pektin hingga menghasilkan rendemen pektin yang maksimum dan mendapatkan karakteristik pektin hasil optimasi. Metode optimasi dalam penelitian ini menggunakan Response Surface Methodology (RSM) dengan dengan rancangan eksperimen Central Composite Design (CCD) menggunakan software Design Expert 13 untuk menentukan kombinasi perlakuan berdasarkan faktor waktu dan konsentrasi pelarut. Kombinasi perlakuan yang diperoleh adalah 11. Hasil penelitian menunjukkan bahwa nilai rendemen pektin maksimum adalah 34,63% pada waktu ekstraksi 7 menit dengan konsentrasi pelarut asam sitrat 20% dengan keakuratan nilai validasi adalah 99,08%. Karakteristik pektin hasil optimasi diperoleh nilai kadar air 7,66%, kadar abu 0,33%, berat ekuivalen 183,28 mg, kadar metoksil 7,52%, kadar asam galakturonat 67,13%, dan derajat esterifikasi 63,56%. Pektin yang dihasilkan sudah sesuai dengan standar mutu pektin menurut International Pectin Producers Association (IPPA) kecuali pada berat ekuivalen. Kata kunci: albedo lemon, ekstraksi, pektin, ultrasonik

Standardization of extraction of pectin from Assam lemon (Citrus limon Burm f.) peels using novel technologies and quality characterization

Effect of Process Parameters on Extraction of Pectin from Sweet Lime Peels

Optimization Model for Ultrasonic-Assisted and Scale-Up Extraction of Anthocyanins from Pyrus Communis 'starkrimson' Fruit Peel.

Study on Joint Production Technology of Essential Oil and Pectin from Citrus Reticulata Peel

Sonication-synergistic natural deep eutectic solvent as a green and efficient approach for extraction of phenolic compounds from peels of Carya cathayensis Sarg.

Microwave and ultrasound assisted extraction of pectin from various fruits peel

Extraction optimisation and characterisation of Artocarpus integer peel pectin by malonic acid-based deep eutectic solvents using response surface methodology

Application of combined Box-Behnken design with response surface methodology and desirability function in optimizing pectin extraction from fruit peels

Comparison of different technologies using organic acid and mineral acid solvents on pectin extraction from apple pomace

Extraction of Pectin from Passion Fruit Peel: Composition, Structural Characterization and Emulsion Stability

A cleaner and eco-friendly approach to simultaneous extraction and characterization of essential oil and pectin from Assam lemon peel and its application for Energy Generation through TENG devices.

Effect of Ultrasound-Assisted, Microwave-Assisted and Ultrasound-Microwave-Assisted Extraction on Pectin Extraction from Industrial Tomato Waste

Acoustic Cavitation Assisted Extraction of Pectin from Waste Grapefruit Peels: A Green Two-Stage Approach and Its General Mechanism

Optimization and Quality Characteristics of Mango Peel Pectin

Optimization of Pectin Extraction Process from Albedo of Citrus Lemon (Citrus limon) Using Ultrasonic Method

Physicochemical and antioxidant properties of pectin fractions extracted from lemon ( Citrus Eureka ) peels

Evaluation of citrus pectin extraction methods: Synergistic enhancement of pectin's antioxidant capacity and gel properties through combined use of organic acids, ultrasonication, and microwaves

Ultrasound-Assisted Extraction of Pectin from 'Saba' Banana Peel Waste: Optimization and Rheology Study

Extraction and Characterization of Pectic Polysaccharides from Chaenomeles Sinensis Fruit by Hot Compressed Water

Manosonication Assisted Extraction and Characterization of Pectin from Different Citrus Peel Wastes

Microwave Assisted Extraction of Citrus limetta Peel and assessment of its Bio-Actives Using HRLC-MS/MS