Abstract:Ammonium (NH4+) in wastewater is both a major pollutant and a valuable resource. Flow-electrode capacitive deionization (FCDI) is a promising technology for chemical-free and environmentally friendly NH4+ removal and recovery from wastewater. However, the coexisting sodium (Na+) in wastewater, with a similar hydrated radius to NH4+, competes for the adsorption sites, resulting in low NH4+ removal efficiency. Here, potassium dititanate (K2Ti2O5 or KTO) particles prepared by the electrospray method followed by calcination were mixed with activated carbon (AC) powder to form a novel KTO-AC flow-electrode for selective NH4+ removal over Na+. The mixed KTO-AC electrode exhibits a much higher specific gravimetric capacitance in NH4Cl solution than in NaCl solution. Compared with the pure AC electrode in the FCDI tests on NH4+ removal from synthetic wastewater, 25 wt % KTO addition in the electrode mixture increases the adsorption selectivity from 2.3 to 31 toward NH4+ over Na+, improves the NH4+ removal from 28.5% to 64.8% and increases the NH4+ desorption efficiency from 35.6% to over 80%, achieving selective NH4+ recovery and effective electrode regeneration. Based on DFT calculations, NH4+ adsorption on the K2Ti2O5 (0 0 1) surface is more thermodynamically favorable than that of Na+, which contributes to the high NH4+ adsorption selectivity observed.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.est.0c04383?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.est.0c04383</a>.Further information about the methods of KTO particles preparation, FCDI configuration and operation, electrochemical analysis, theoretical DFT calculation; detailed information on the characteristics of KTO, including SEM/TEM images, zeta-potential, BET, stability, selectivity, specific capacitance, and DFT results; the variation and distribution of cations during the FCDI tests; result of the static adsorption test; and influence of electrolyte salinity on the ammonium removal (<a class="ext-link" href="/doi/suppl/10.1021/acs.est.0c04383/suppl_file/es0c04383_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Effective removal of ammonium nitrogen using titanate adsorbent: Capacity evaluation focusing on cation exchange

Mesoporous Titanate-Based Cation Exchanger For Efficient Removal Of Metal Cations

Effect of nitrate or sulfate on flocculation properties of cationic polymer flocculants

Insight into the effect of surfactant modification on the versatile adsorption of titanate-based materials for cationic and anionic contaminants

Influence of Ph, Ionic Strength and Humic Acid on Competitive Adsorption of Pb(II), Cd(II) and Cr(III) Onto Titanate Nanotubes

Highly efficient adsorption of Cr(VI) from aqueous solutions by amino-functionalized titanate nanotubes

Adsorption of Pb2+, Cd2+, Cu2+ and Cr3+ Onto Titanate Nanotubes: Competition and Effect of Inorganic Ions

A novel poly ligand exchanger – Cu(II)-loaded chelating resin for the removal of ammonia-nitrogen in aqueous solutions

Adsorption of Cu(II) and Cd(II) on Titanate Nanomaterials Synthesized Via Hydrothermal Method under Different NaOH Concentrations: Role of Sodium Content

Enhanced ion recognition through bi-directionally layered spacing regulation of 1D tubular titanate nanofilms

Selective Ammonium Removal from Synthetic Wastewater by Flow-Electrode Capacitive Deionization Using a Novel K 2 Ti 2 O 5 -Activated Carbon Mixture Electrode

Adsorption Mechanisms of High-Levels of Ammonium Onto Natural and Nacl-Modified Zeolites

Secondary particle size determining sedimentation and adsorption kinetics of titanate-based materials for ammonia nitrogen and methylene blue removal

Absorption of Cr(VI) onto amino-modified titanate nanotubes using 2-bromoethylamine hydrobromide through SN2 reaction.

A novel selective hybrid cation exchanger for low-concentration ammonia nitrogen removal from natural water and secondary wastewater

The effects of surface acidity on CO2 adsorption over amine functionalized protonated titanate nanotubes

Capability of Cation Exchange Technology to Remove Proven N-Nitrosodimethylamine Precursors

Mechanism of the Adsorption of Ammonium Ions from Aqueous Solution by A Chinese Natural Zeolite

Selective Recovery of Ammonia Nitrogen from Wastewaters with Transition Metal‐Loaded Polymeric Cation Exchange Adsorbents

Adsorption Mechanism of High-Concentration of Ammonium onto Chinese Natural Zeolite by Experimental Optimization and Theoretical Computation

Mechanism of Ammonium Adsorption from Wastewater by Modified Bentonite and Optimization by Response Surface