Abstract:Flexibility of Lime Mortar resulting from its good permeability feature through its relatively large interconnected pore structure makes it popular as an old sustainable building material. This characteristic feature enhances its capability to suppress masonry deformation. However, its mechanical strength is weak. To address this shortcoming, cement is added to form a stronger composite. This study, therefore, evaluates the pore structure of the resulting lime-cement composite, with a view to assessing impact and sustainability of the lime’s flexibility in the overall performance of the composite. Adopting equal mix ratio (1:3) of Binder/Aggregate (B/A), mortars were prepared using lime as a lone binder, as well as other five different compositions in the ascending and descending order of lime and cement binders (i.e., 1:1, 1:2, 1:3, 2:1 and 3:1). Each composition was assessed in fresh state using Water/Binder ratio, Air Content and Bulk Density. For the hardened state assessments, mechanical characteristics and microstructural features evaluated through six (6) and twelve (12) month curing periods respectively, were considered. Results of the investigation reveal that low cumulative porosity (i.e., summation of the porosities) across the three pore regions of Inter-Nano pores (1 – 10 nm), Super-Nano pores (10 – 100 nm) and Sub-Micro pores (0.1 – 1 μm), for each of the mortars, is observed to be synonymous with low cement content, low Modulus of Elasticity, low (fc/ff), and thus, high flexibility. This observation is supported by high linear coefficient of correlation (R2 = 0.89) for the equation describing both ‘cumulative porosity’ (within the referenced three pore ranges) and cement content. Thus, it could be inferred that despite cement addition with resulting alteration in the pore structure of the composite, presence of lime would retain flexibility property of the composites, with more flexibility in the descending order of cement contents. Considering the impacts of pandemic climate change, growing energy costs and human activities on the environment, this study therefore attempts to promote revival of an old but partially abandoned sustainable lime based mortars, with a view to facilitating improved lime mortar performances, conservation of energy resources and overall protection of the environment.

Optimizing Lime Mortar Performance: A Comprehensive Study on Mechanical and Durability Improvements with Palm Jaggery and Gallnuts

The Synergy Effect of Limestone Powder and Mineral Admixtures on the Mechanical Property of Mortar

Influence of Sticky Rice and Jaggery Sugar Addition on Lime Mortar

Pore Structure as a Determinant of Flexibility in Sustainable Lime-Cement Mortar Composites

Study on the Mechanical Properties of Two General-Purpose Cement–Lime Mortars Prepared Based on Air Lime

Influence of Accelerated Carbonation on the Physico-Mechanical Properties of Natural Fiber-Reinforced Lime Mortars

Developing Low Cost Eco-friendly Restoration Mortars for Historic Lime-based Stucco and Building Materials

Preliminary Studies into Methods for Microstructural Improvements of Hydrated Lime Putty

Unveiling the potential of viscosity-modifying amylopectin for enhancing hydraulic lime mortar performance

Evolution of Durability and Mechanical Behaviour of Mud Mortar Stabilized with Oil Shale Ash, Lime, and Cement

The Influence of Water/Binder Ratio on the Mechanical Properties of Lime-Based Mortars with White Portland Cement

Influence of Anti-cracking Fiber on Properties of Traditional Sticky Rice-lime Mortar

Evaluation of mechanical properties of cement mortars containing pond ash as partial replacement of river sand and prediction of properties by regression models

Influence of recycled concrete, marble, glass, and limestone powder, and utilization ratios on the compressive strength and alkali–silica reaction performance of mortar mixtures

Mechanical and Durability Properties of Mortars Incorporating Red Mud, Ground Granulated Blast Furnace Slag, and Electric Arc Furnace Dust

Study on the shear properties of masonry pagoda mortar and its influencing factors

Effect of lime mud under wet grinding on the compressive strength and hydration of cement mortar

An Integrated Experimental-Numerical Study of the Performance of Lime-Based Mortars in Masonry Piers Under Eccentric Loading

Development and Characterization of Lime-Based Mortars Modified with Graphene Nanoplatelets

Adding hydrated lime for improving microstructure and mechanical properties of mortar for ultra-high performance concrete

Experimental Study on Compressive Strength of Magnesium Oxychloride Cement Mortar Using Stone Crushed Powder by Varying Molar Ratio