Abstract:The restoration of stone cultural relics requires materials that align with the relics’ inherent characteristics and are economically viable. While natural hydraulic lime has historically been the preferred material for such restoration efforts, challenges such as limited availability and high costs have prompted the exploration of alternative solutions. In this study, three distinct formulations of artificial hydraulic lime (GL1, GL2, and GL3) were meticulously developed by combining hydraulic components, volcanic ash activators, heavy calcium powder, and slaked lime powder. Emphasizing compatibility with stone cultural relics, GL2 and GL3 were selected for the preparation of a stone cultural relic restoration mortar. Comprehensive testing, including fluidity, water absorption rate, strength, and drying shrinkage, was conducted. The restoration mortars demonstrated optimal fluidity between 170 and 180 mm, meeting stringent requirements for restoration applications. Notably, the water absorption rate, ranging from 13% to 15%, exceeded that of native rock, satisfying sacrificial protection criteria. After a 28-day carbonization period, the compressive strength of AL3 and BL3 samples surpassed 20 MPa, while AL2 and BL2 samples exhibited compressive strengths ranging from 16 to 19 MPa—well within the 20%-80% range of the native rock’s compressive strength. The pull-out bonding strength at 28 days was moderate for all four restoration mortar types, with no discernible irreversible damage to the underlying rock base. The adaptability of selecting restoration mortar based on the material strength of stone cultural relics was demonstrated. Finally, the successful application of the restoration mortar formulated with GL2 lime in restoring stone slabs at the Confucius Temple highlights the practical significance of the research findings, offering valuable insights for the sustainable preservation of architectural heritage.

Preliminary Studies into Methods for Microstructural Improvements of Hydrated Lime Putty

Preliminary study on consolidation materials for historical cement buildings

Preliminary assessment of the efficacy of nano-MgO-based dispersion for the consolidation of artificial weathered sandstone

Synergistic Improvement Earthen Mortars with Tung Oil, Sticky Rice Pulp, and Aerial Lime: Application for the Conservation of Rammed Earth Structures Damaged by Exfoliation

Chemical And Microscopic Study Of Masonry Mortar In Ancient Pagodas In East China

Erosion of Aerial Lime and Sticky Rice Mortars by Cyclic Wetting–drying and Dilute Sulfate Acid Actions

Effect of lime mud under wet grinding on the compressive strength and hydration of cement mortar

Optimizing Lime Mortar Performance: A Comprehensive Study on Mechanical and Durability Improvements with Palm Jaggery and Gallnuts

Adding hydrated lime for improving microstructure and mechanical properties of mortar for ultra-high performance concrete

Enhancing Hydraulic Lime Mortar with Metakaolin: A Study on Improving Restoration Materials for Historic Buildings

Rheological Properties and Early-Age Microstructure of Cement Pastes with Limestone Powder, Redispersible Polymer Powder and Cellulose Ether

Microstructure and Application Study of Secondary Calcined Lime As Consolidant for Cultural Relics

Effect of ultrafine pozzolanic powders on durability of fabricated hydraulic lime

Study on the Mechanical Properties and Durability of Hydraulic Lime Mortars Based on Limestone and Potassium Feldspar

Effect of High Content Limestone Powder on Microstructure and Mechanical Properties of Cement-based Materials

Sticky rice–nanolime as a consolidation treatment for lime mortars

Research on High-Strength and Rapid-Hardening Magnesium Phosphate As a Novel Bonding Material for Limestone Artifacts

Effects of an Isobutylene–Maleic Anhydride Copolymer on the Rheological Behavior and Early Hydration of Natural Hydraulic Lime

Impacts of Mg/Al-layered double hydroxide modified with polycarboxylate on the properties of cement paste

Advancements in Artificial Hydraulic Lime Composites for Sustainable Restoration of Stone Cultural Heritage

Cement kiln dust-based geopolymer: Microstructural investigation and performances optimization through response surface methodology