Abstract:Mechanical Vapor Recompression (MVR) system is an efficient system for evaporation, which has been employed in extensive fields. Solution regeneration in HVAC fields is significant. In this paper, MVR system is used to regenerate a type of anti-frozen solution of heat-source tower heat pump, the sodium chloride solution with high concentration. A system model has been built to analyze the stable operating performance of regeneration. Meanwhile, an experiment plant of MVR system has been established to monitor the actual operating performance of the system to validate the model. Operating parameters of the system are calculated based on the system model. Performance indicators are analyzed according to the parameters calculated above. The influence of the input parameters on the evaporating performance of the system is studied, including the frequency of compressor, temperature of inlet weak solution, concentration of inlet weak solution. With the increase of frequency of compressor or the increase of inlet solution temperature, evaporation rate, quantity of heat transfer and power consumption of compressor increase accordingly. Power consumption of the compressor to evaporate per ton of water reaches 16.8 kWh, when the suction pressure is 25 kPa, the concentration of the inlet weak solution is 18%, and the frequency of compressor is 100 Hz. Concentration of solution has a great effect on the boiling point elevation of the solution. Therefore, when the concentration of solution is high, power consumption of compressor increases significantly, and COP decreases sharply. When the inlet concentration increases 1%, the power consumption of the compressor to evaporate per ton of water increases 8.2%, and COP decreases 2.7%.

The influence of operation parameters on concentration ratio of multi-effect evaporation system with mechanical vapor compression

A Comparative Study on Regulation Methods for Transcritical CO2 Ejector Expansion Refrigeration System.

Theoretical investigation on an ejector–expansion refrigeration cycle using zeotropic mixture R290/R600a for applications in domestic refrigerator/freezers

Theoretical Study on a Modified Single‐stage Autocascade Refrigeration Cycle with Auxiliary Phase Separator

Comparative Studies of Ejector-Expansion Vapor Compression Refrigeration Cycles for Applications in Domestic Refrigerator-Freezers

Numerical Analysis on the Performance of Mechanical Vapor Recompression System for Strong Sodium Chloride Solution Enrichment

Theoretical Investigation on the Performance of a Modified Refrigeration Cycle Using Binary Zeotropic Hydrocarbon Mixture R170/R290

Energy and exergy analysis of zeotropic mixture R290/R600a vapor-compression refrigeration cycle with separation condensation

Experimental study of waste concentration by mechanical vapor compression technology

Comparative study on energy-saving performance of single- and two-stage evaporative-cooling condenser systems

A integrated mechanical vapor compression enrichment system of radioactive wastewater: Experimental study, model optimization and performance prediction

Multi-Objective Optimization of Parallel-Connected Double-Effect Mechanical Vapor Recompression System Based on Genetic Algorithm

Effect of Droplets on Water Vapor Compression Performance

Component innovations for lower cost mechanical vapor compression

A comprehensive parametric and structural bond analysis of an actual vapor compression refrigeration system with dedicated mechanical subcooled system

Role and performance of TVC in MED desalination plant

Investigation on improvement potential of steam ejector performance in refrigeration cycle via constant rate of momentum change design method

Thermodynamic Analysis of Hybrid Two-Stage CO 2 Mechanical Compression–ejector Cooling Cycle

Analysis of PVT-powered multi-effect mechanical vapor compression desalination system at different feed configurations: Energy, exergy, and economic approaches

Experimental investigation on the hybrid system of mechanical vapor recompression and hollow fiber vacuum membrane distillation applied for wastewater treatment

Modeling of a MED-TVC desalination system by considering the effects of nanoparticles: energetic and exergetic analysis