Abstract:Objective For an aero-engine in operation, the pressure distribution of the exhaust jet flow field is the main parameter of flow characteristics and temperature field. Therefore, the accurate measurement of the exhaust jet flow field pressure of the aero-engine is of great significance to study the state of the aero-engine in operation. As traditional speed and pressure measurement tools, sensors such as pitot tubes fail to be directly applied to high-temperature and high-speed complex flow fields such as combustion due to their shortcomings of destructive flow fields, single point measurement, and low temporal and spatial resolutions. With the development of visual measurement and image processing technologies, optical measurement methods have been gradually applied to measure the physical parameters of the flow fields. As a typical optical diagnosis method, the pressure field reconstruction method based on particle image velocimetry (PIV) is only applicable to the pressure field reconstruction of incompressible fluid. As a flow field visualization measurement technology, the schlieren method has the characteristics of a large measurement range, fast response speed, and simple test equipment. It is an effective method for real-time measurement of flow field parameters. By applying the schlieren method to reconstruct the pressure field of the jet flow field of the aero-engine, the real non-contact measurement can be realized, and the accuracy of measurement can be improved. Methods This paper proposes a method of reconstructing the pressure field distribution of high-speed airflow by using the schlieren method to decouple the velocity and density fields, so as to realize the real-time measurement and reconstruction of the density field, velocity field, and pressure field of the high-speed airflow. First, the relationship between the brightness of schlieren images and the light shift is calibrated by using the calibrated schlieren method. After obtaining the calibration curve, the light shift can be obtained according to the light and dark changes in the schlieren images, and then the density distribution of the flow field will be indirectly obtained. Meanwhile, the velocity distribution can be obtained by using an optical flow velocimetry algorithm through the schlieren images of continuous frames. Finally, the static and dynamic pressure distributions of the flow field can be obtained through a numerical calculation by using the obtained velocity and density information, and then the total pressure distribution can be obtained. Results and Discussions The density field (Fig. 11) and velocity field (Fig. 13) of the micro vortex jet wake field are reconstructed by the schlieren method, and the density field of the micro vortex jet wake field is reconstructed by using the obtained density and velocity information. In order to verify the feasibility and accuracy of the experimental method, the measured pressure at five points near the nozzle is selected and compared with the reconstructed pressure field (Fig. 18). The results show that the two results are close within the error range, and the maximum error is not more than 5%. The following factors are considered to determine error sources: when the density field of the flow field is measured, the model of the flow field is regarded as axisymmetric, and there is a certain error; when the pressure gradient distribution is calculated, the numerical calculation method is used, which has some errors; since the measurement time of pitot tubes and schlieren velocity-density field coupling reconstruction method is different, there will be some errors in the measurement results although the interval time is short. However, these errors are within the allowable range of measurement. Therefore, the reconstruction method of the high-speed airflow pressure field by using the schlieren method to decouple the velocity and density fields is feasible. Conclusions In this paper, the schlieren optical flow method is used to synchronously reconstruct the density and velocity fields of the axisymmetric flow field, which not only overcomes the shortcomings of the traditional single point measurement of pressure sensors, contact measurement, poor spatial and temporal resolutions but also compensates for the disadvantages of the PIV-based pressure field reconstruction technology. The technology requires the distribution of tracer particles and can only reconstruct the pressure field of incompressible fluid. Therefore, the proposed method is effective in accurately reconstructing the pressure distribution of high-speed flow fields, and it can extend the application scope of the schlieren method in the quantitative measurement of flow fields.

Experimental investigation on the effect of boundary conditions and spatial resolution on pressure from PIV for oscillating internal flow

Error Propagation in the Procedure of Pressure Reconstruction Based on Piv Data

An Irrotation Correction on Pressure Gradient and Orthogonal-Path Integration for PIV-based Pressure Reconstruction

Error Reduction for Time-Resolved PIV Data Based on Navier–Stokes Equations

Error propagation dynamics of PIV-based pressure field calculation (3): What is the minimum resolvable pressure in a reconstructed field?

From Particles to Pressure: PIV-based pressure reconstruction for base flows

Error Propagation Dynamics of PIV-based Pressure Field Calculations: How well does the pressure Poisson solver perform inherently?

Uncertainty-based pressure field reconstruction from PIV/PTV flow measurements with generalized least-squares

Pressure from 2D snapshot PIV

Experimental Study on Pressure-Velocity Relation of Near-Field Tip Vortex Using Tomographic PIV

PIV-based fast pressure reconstruction and noise prediction of tandem cylinder configuration

Investigation on spatial breakup characteristics of low-pressure jets with particle image velocimetry experiment and volume of fluid–level set simulation

Pressure Reconstruction from the Measured Pressure Gradient Using Gaussian Process Regression

Modified (n+1)D Laplacian for Smooth Pressure Reconstruction based on Time-resolved Velocimetry (1): Analysis and Numerics

Comparative Assessment for Pressure Field Reconstruction Based on Physics-Informed Neural Network

Assessment of Multi-Physical Fields Reconstruction Approaches in Three-Dimensional Supersonic Flow with Shocks

The Imprint of Vortical Structures on the Pressure Field at the Edge of a Turbulent High-Speed Jet

Investigation of Large Scale Motions in Zero and Adverse Pressure Gradient Turbulent Boundary Layers Using High-Spatial-Resolution PIV

Examination of Appropriate Formulations for Velocity and Pressure Calculation Methods at Interfacial Region on Collocated Physical Variables' Distribution

Reconstruction of Pressure Distribution in High- Velocity Airflow Fields by Schlieren Decoupling of Velocity and Density Fields

Temporal and Spatial Flow Field Reconstruction from Low-Resolution PIV Data and Pressure Probes Using Physics-Informed Neural Networks