Abstract:Au-17.5Ni is a high-performance solder extensively utilized in the assembly of satellites, aircraft engines, and ceramic components, owing to its exceptional high-temperature properties. However, its inherent brittleness renders it susceptible to defects such as fractures, cracking, and delamination during the manufacturing of welding wires and foils. To mitigate these challenges, this study employs first-principles calculations to investigate the structural stability, mechanical properties, and thermal behavior of the primary phase in the Au-17.5Ni alloy, with a particular focus on the Au-rich phase, a solid solution of Ni in Au. The results indicate that the Au-2.0Ni composition exhibits the highest plasticity, characterized by a Pugh's ratio (B/G) of 7.671 and a hardness value of 0.566 GPa, representing a 25.78% increase compared to pure Au. These improvements significantly enhance the processing performance of the Au-17.5Ni alloy. Moreover, the constant pressure specific heat capacity (Cp) of Au-xNi alloys exceeds that of pure Au and increases with higher Ni content. At 800 K, the Au-3.0Ni alloy exhibits the highest Cp at 31.179 J/mol·K, indicating improved high-temperature stability. Additionally, the thermal expansion coefficients for Au-1.0Ni, Au-2.0Ni, and Au-3.0Ni increase by 13.037%, 22.858%, and 38.097%, respectively, which may lead to elevated thermal stresses in welded joints. Consequently, maintaining the Ni content in the Au-rich phase of the Au-17.5Ni solder below 2.0 wt% can significantly enhance solder processability, ultimately improving the yield of welding wires and foils.

Nanocrystals AuNi9 fibers: Ultra-high strength and synergetic strengthening mechanism

Mechanical Property of Metallic Nanowires: the Shorter is Stronger and Ductile

In Situ Observation of High Bending Strain Recoverability in Au Nanowires

Ultra-high Strength Yet Superplasticity in a Hetero-Grain-sized Nanocrystalline Au Nanowire

Nanocrystallization Enabled Tensile Ductility of Co-Based Amorphous Microwires

A novel nanostructure to achieve ultrahigh strength and good tensile ductility of a CoCrFeNiMn high entropy alloy

Nanodomained Nickel Unite Nanocrystal Strength with Coarse-Grain Ductility

Twinning and 9R Phase Transition Mediated Extraordinary Cold-drawn Deformability in NiCoCrFeMo High-Entropy Alloy

Dimension-dependent mechanical features of Au-nanocrystalline nanofilms

A nanodispersion-in-nanograins strategy for ultra-strong, ductile and stable metal nanocomposites

High tensile ductility in a nanostructured metal

Microstructure-Hardened Silver Nanowires

Rebuilding the Strain Hardening at a Large Strain in Twinned Au Nanowires.

Preparation, Magnetic and Mechanical Properties of Fe/Ni-Based Amorphous Fibers

Length-dependent Mechanical Properties of Gold Nanowires.

Controlled Growth of Silver Nanoparticles on Carbon Fibers for Reinforcement of Both Tensile and Interfacial Strength

Molecular dynamics investigations of the size effects on mechanical properties and deformation mechanism of amorphous and monocrystalline composite AlFeNiCrCu high-entropy alloy nanowires

Strain Hardening and Size Effect in Five-fold Twinned Ag Nanowires.

Grain growth and strengthening mechanisms of ultrafine-grained CoCrFeNiMn high entropy alloy matrix nanocomposites fabricated by powder metallurgy

Simultaneously achieving strength and ductility in Ni3Al nanowires with superlattice intrinsic stacking faults

Enhancement effect of Ni on the mechanical and thermodynamic properties of Au-xNi (x=0.5,1.0,1.5,2.0,2.5,3.0) alloy: a first-principles study