Abstract:Background: To assess the optical behavior of a new diffractive intraocular lens (IOL) and compare its performance to that of an established extended-depth-of-focus (EDOF) IOL. Methods: This study assessed the Proming EDOF Multifocal AM2UX [Eyebright Medical Technology (Beijing) Co., Ltd., China] and the AT LARA 829MP [Carl Zeiss Meditec, Germany]. An experimental set-up with 0.01% fluorescein solution and monochromatic light (532 nm) was used to visualize the IOLs' ray propagation. In addition, the optical quality of the IOLs was assessed by measuring the modulation transfer function (MTF) values at 50lp/mm and 3.0 and 4.5 mm apertures on the optical bench OptiSpheric® IOL PRO II [Trioptics GmbH, Germany]. Results: The ray propagation of the two IOLs showed two distinct foci. Light intensity assessment revealed that both IOLs allocate more energy to primary than secondary focus. At 3.0 mm pupil, the MTF values at 50lp/mm for the primary focus were 0.39 and 0.37, and for the secondary focus, 0.29 and 0.26 for the AT LARA and Proming IOLs, respectively. At 4.5 mm pupil, the single-frequency MTF for the primary focus was 0.51 and 0.24 and for the secondary focus 0.21 and 0.15 for the AT LARA and Proming IOLs, respectively. Conclusions: When tested with an aberration-free model cornea under monochromatic conditions, the Proming behaved as a low-add bifocal lens; however, its properties did not differ much from the well-established AT LARA EDOF IOL. The AT LARA outperformed the Proming at low defocus (up to 2D), while the latter demonstrated better image quality in the 2-3D range.

Efficiency and coherence preservation studies of Be refractive lenses for XFELO application

Optimization of the Cavity Beam-Position Monitor System for the Shanghai Soft X-ray Free-Electron Laser User Facility

X‐ray optics for the cavity‐based X‐ray free‐electron laser

Tailoring Freeform Beam-Shaping Lenses for Edge-Emitting Lasers

Femtosecond Laser Ablation for Manufacturing of X-ray Lenses and Phase Corrector Plates

Research on the Design of Kepler Refractive Shaping System with the Long Working Focal Depth

Design and imaging performance of achromatic diffractive/refractive X-ray and Gamma-ray Fresnel lenses

Polished diamond X-ray lenses

Thermal loading on crystals in an X-ray free-electron laser oscillator

Thermoelastic response of Bragg crystals under MHz thermal loading

Carbon-based Fresnel optics for hard x-ray astronomy

Ion beam lithography for Fresnel zone plates in X-ray microscopy

Laboratory analysis and ray visualization of diffractive optics with enhanced intermediate vision

Feasibility study of a hard x-ray FEL oscillator at 3 to 4 GeV based on harmonic lasing and transverse gradient undulator

Development of ground-testable phase fresnel lenses in silicon

Single Crystal Diamond Refractive Lens for Focusing of X-rays in Two Dimensions

Double-pulse speckle contrast correlations with near Fourier transform limited free-electron laser light using hard X-ray split-and-delay

Nanofocusing optics for an X-ray free-electron laser generating an extreme intensity of 100 EW/cm$^2$ using total reflection mirrors

X-ray focusing with efficient high-NA multilayer Laue lenses

A perfect X-ray beam splitter and its applications to time-domain interferometry and quantum optics exploiting free-electron lasers

Wavefront preserving and high efficiency diamond grating beam splitter for x-ray free electron laser