The Use of Microfiltration for the Pretreatment of Backwash Water from Sand Filters

Małgorzata Wolska,Małgorzata Kabsch-Korbutowicz,Agata Rosińska,Anna Solipiwko-Pieścik,Halina Urbańska-Kozłowska

DOI: https://doi.org/10.3390/ma17122819

IF: 3.4

2024-06-11

Materials

Abstract:Tests of microfiltration efficiency used for the pretreatment of backwash water from sand filters were conducted at two water treatment plants treating surface water and infiltration water. Microfiltration efficiency was evaluated for three membrane modules: two with polymeric membranes and one with a ceramic membrane. This study showed that the contaminants that limit the reuse of backwash water from both plants by returning them to the water treatment line are mostly microorganisms, including pathogenic species (Clostridium perfringens). Additionally, in the case of backwash water from infiltration water treatment, iron and manganese compounds also had to be removed before its recirculation to the water treatment system. Unexpectedly, organic carbon concentrations in both types of backwash water were similar to those present in intake waters. Microfiltration provided for the removal of organic matter, ranging from 19.9% to 44.5% and from 7.2% to 53.9% for backwash water from the treatments of surface water and infiltration water, respectively. Furthermore, the efficiency of the iron removal from backwash water from infiltration water treatment was sufficient to ensure good intake water quality. On the other hand, manganese concentrations in the backwash water, from infiltration water treatment, pretreated using the microfiltration process exceeded the levels found in the intake water and were, therefore, an additional limiting factor for the reuse of the backwash water. In both types of backwash water, the number of microorganisms, including Clostridium perfringens (a pathogenic one), was a limiting parameter for backwash water reuse without pretreatment. The results of the present study showed the possibility for using microfiltration for the pretreatment of backwash water, regardless of its origin but not as the sole process. More complex technological systems are needed before recirculating backwash water into the water treatment system. The polyvinylidene fluoride (PVDF) membrane proved to be the most effective for DOC and microorganism removal from backwash water.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering

What problem does this paper attempt to address?

The problem this paper attempts to address is: how to pre-treat backwash water from sand filters using microfiltration technology so that it can be safely reused in the water treatment system.

Specifically, the main objectives of the study include:
1. **Evaluating the efficiency of microfiltration technology**: Investigating the effectiveness of microfiltration technology in pre-treating backwash water from surface water and infiltration water treatment plants.
2. **Ensuring water quality meets intake standards**: The backwash water pre-treated by microfiltration technology should meet or approach the water quality standards of intake water to ensure it can be safely reused in the water treatment system.
3. **Comparing the effectiveness of different membrane materials**: Testing the performance of three different types of membrane modules (two polymer membranes and one ceramic membrane) in removing organic matter, iron, manganese, and microorganisms.

The research background indicates that backwash water contains high concentrations of microorganisms, organic substances, and iron and manganese compounds, which limit the direct reuse of backwash water. Therefore, effective pre-treatment methods are needed to remove these contaminants to ensure the safe reuse of backwash water.