Abstract:Purpose Fused filament fabrication (FFF) is a common additive manufacturing method that is widely used owing to its low cost, environmental friendliness and safety. Colour models are needed because of their ability to express more information, but high printing quality and efficiency are difficult to achieve with the existing FFF colour printing methods because of the “inertia” of printing. Inertia refers to the feature of the former colour material remaining in the molten cavity when switching colours in colour FFF printing. The purpose of this paper is to propose a new FFF colour printing method to reduce printing material usage and printing time. Design/methodology/approach A new FFF colour printing method that uses transitioning waste to construct the part is proposed. Based on the freedom of the colour surface model’s interior space, the internal fill and support of the print model are generated using the transitioning waste to reduce printing material usage and printing time and to achieve environmentally friendly colour printing. The modified elite ant system (EAS) algorithm is used to construct and optimize this method based on the colour surface model. Findings A colour printing experiment is performed using a colour-mixing FFF printer platform with a special waste extrusion module. The experimental results show that this method can significantly reduce material and time consumption compared to the commonly used method. The printed part produced by this method also has high surface quality. Originality/value A new FFF colour printing method that uses transitioning waste to construct the part is proposed. Based on the freedom of the colour surface model’s interior space, the internal fill and support of the print model are generated using the transitioning waste to reduce printing material usage and printing time and to achieve environmentally friendly colour printing. The modified EAS algorithm is used to construct and optimize this method based on the colour surface model. A special waste extrusion module is developed.

In-mold decoration method

Outside mold decoration technology

The Application of Electrical-Heating High Gloss Injection Mold Technology in the Forming of FPD Cabinets

Design of Injection Mould for Bowl

Investigation of film–substrate interfacial characteristics of polymer parts fabricated via in-mold decoration and microcellular injection molding process

Cellular distribution and warpage deformation in double-sided in-mold decoration combined with microcellular injection molding process

Injection moulding of mechanical micro-manufactured structures for optically encoding plastic surfaces

Method for printing and decorating lacquerware surface with ultraviolet curing printing ink (UV ink)

Effect of Films on In‐Mold Decoration and Microcellular Foaming Injection Molding Parts: Cell Structure, Surface, Warpage, and Mechanical Properties

Bottle Mould Rapid Design Based on Variant Design and Molding Process Optimization Method

A microporous pp foamed plastics injection molding process

Colourful Fused Filament Fabrication Method Based on Transitioning Waste Infilling Technology with a Colour Surface Model

Colored 3D (Three Dimensional) printing equipment using fused deposition modeling method

Method for preparing biomimetic colour super hydrophobic coating by multi beam interference photoetching technology

Preparation technology of PET/PETG shrink film

New Injection Molding Technology and Development for Polymer Materials

Water-based plastic printing ink and preparation method thereof

Digital High-Efficiency Print Forming Method and Device for Multi-Material Casting Molds

Two-color Injection Molding of a TV Front Cabinets on an General Machine

A low-cost and highly efficient method of reducing coolant leakage for direct metal printed injection mold with cooling channels using optimum heat treatment process procedures

Effect of inorganic nanoparticles on polypropylene in‐mold decoration and microcellular foaming injection molding composites