Abstract:Particle-reinforced titanium matrix composites (PTMCs), as a new type of lightweight high-temperature structural materials, have a broad application prospect in aerospace and advanced automotive fields, owing to their excellent fatigue-resistance ability, as well as high-temperature toughness and hardness properties. Grinding with cubic boron nitride (CBN) superhard abrasive wheels plays a continuous growth role in achieving high-efficiency ultimate precision, and desired surface quality of components. However, high grinding temperatures, fast tool wear, and numerous machining defects appear during conventional grinding (CG) processes due to the presence of reinforcement phases within PTMCs. In this paper, a radial ultrasonic vibration–assisted grinding (RUVAG) equipment is proposed and fabricated to achieve the reduction of tool wears and high machined surface quality. Results show that radial ultrasonic vibrating amplitudes have great influences on material removal mechanism and abrasive wear properties. When the amplitude reaches 5 μm, the synergistic removal of reinforcement phases (i.e., TiC particles and TiB short fibers) and Ti–6Al–4 V matrix materials was achieved in terms of micro-fracture morphology of grains, machined surface defects, and evolutions of average pile-up ratio after employing radial ultrasonic vibrations into CG processes. Meanwhile, the normal grinding force was increased by 5.1–14.8% and the grinding temperature was reduced by 37.2% under the RUVAG process, resulting from the radial hammering action and interrupted cutting state between workpiece and grains. Additionally, radial ultrasonic vibration facilitates the transverse expansion of cracks within the reinforcing particles and promotes microfracture behavior, leading to a significant reduction in surface defects. This study helps to promote the engineering application of PTMCs, and also provides a practical reference and theoretical basis for realizing high quality and efficient processing of other difficult-to-machine materials.

Wear Behavior of Ceramic Tools in Longitudinal‐Torsional Ultrasonic Vibration‐Assisted Milling

Investigation on cutting forces and tool wear in high-speed milling of Ti-6Al-4V assisted by longitudinal torsional ultrasonic vibrations

Cutting Performance of a Longitudinal and Torsional Ultrasonic Vibration Tool in Milling of Inconel 718

STUDY ON THE WEAR PERFORMANCES OF CERAMIC TOOLS FOR MACHINING 304 STAINLESS STEEL

Study on tool wear in longitudinal-torsional composite ultrasonic vibration–assisted drilling of Ti-6Al-4V alloy

Cutting performance and coated tool wear mechanisms in laser-assisted milling K24 nickel-based superalloy

Inhibitory Effect of Laser Surface Texturing in Dry Cutting of Titanium Alloy on Cemented Carbide Tool Wear

Performance Analysis of the Longitudinal-Torsional Ultrasonic Milling of Ti-6Al-4V

Cutting performance and surface quality of Ti-6Al-4V by longitudinal ultrasonic vibration-assisted high-speed dry milling with coated carbide tools

Cutting Force Model of Longitudinal-Torsional Ultrasonic-Assisted Milling Ti-6Al-4V Based on Tool Flank Wear

Investigation on the Tool Wear Suppression Mechanism in Non-Resonant Vibration-Assisted Micro Milling

Tool wear evolution and its influence on cutting performance during milling ultra-high-strength steel using different cooling conditions

Surface micro-texture and tribological properties in longitudinal-torsional ultrasonic-assisted milling Ti2AlNb

Wear mechanism and cutting performance evaluation of fine ceramic tools

Wear Behavior of Al 2 O 3 -Ticn Composite Ceramic Sliding on Stainless Steel

Analytical and experimental investigation on cutting force in longitudinal-torsional coupled rotary ultrasonic machining zirconia ceramics

Theoretical investigation of machining-induced residual stresses in longitudinal torsional ultrasonic–assisted milling

Precision Grinding Technology of Silicon Carbide (SiC) Ceramics by Longitudinal Torsional Ultrasonic Vibrations

Machining performance evaluation and tool wear analysis of dry cutting austenitic stainless steel with variable-length restricted contact tools

Wear Behavior of Si3N4 Ceramic Cutting Tool Material Against Stainless Steel in Dry and Water-Lubricated Conditions

Effect of radial ultrasonic vibrations on wear properties of CBN grains in high-speed grinding of PTMCs