Abstract:As one of the most widely used units in water cooling systems, the closed wet cooling towers (CWCTs) have two typical counter-flow constructions, in which the spray water flows from the top to the bottom, and the moist air and cooling water flow in the opposite direction vertically (parallel) or horizontally (cross), respectively. This study aims to present a simplified calculation method for conveniently and accurately analyzing the thermal performance of the two types of counter-flow CWCTs, viz. the parallel counter-flow CWCT (PCFCWCT) and the cross counter-flow CWCT (CCFCWCT). A simplified cooling capacity model that just includes two characteristic parameters is developed. The Levenberg–Marquardt method is employed to determine the model parameters by curve fitting of experimental data. Based on the proposed model, the predicted outlet temperatures of the process water are compared with the measurements of a PCFCWCT and a CCFCWCT, respectively, reported in the literature. The results indicate that the predicted values agree well with the experimental data in previous studies. The maximum absolute errors in predicting the process water outlet temperatures are 0.20 and 0.24 °C for the PCFCWCT and CCFCWCT, respectively. These results indicate that the simplified method is reliable for performance prediction of counter-flow CWCTs. Although the flow patterns of the two towers are different, the variation trends of thermal performance are similar to each other under various operating conditions. The inlet air wet-bulb temperature, inlet cooling water temperature, air flow rate, and cooling water flow rate are crucial for determining the cooling capacity of a counter-flow CWCT, while the cooling tower effectiveness is mainly determined by the flow rates of air and cooling water. Compared with the CCFCWCT, the PCFCWCT is much more applicable in a large-scale cooling water system, and the superiority would be amplified when the scale of water distribution system increases. Without multiple iterative calculations and extensive experimental data, the simplified method could be used to effectively analyze the thermal performance of counter-flow CWCTs in operation. It is useful for optimization operation of counter-flow CWCTs such that to improve the energy efficiency of the overall cooling water system.

Experimental and computational analysis of thermal performance of the oval tube closed wet cooling tower

Experimental and numerical analysis of a cross-flow closed wet cooling tower

Thermodynamic Investigation on the Performance of Closed Wet Cooling Tower

Investigation of heat transfer characteristics of deflected elliptical-tube heat exchanger in closed-circuit cooling towers

Study on thermal performance of new finned heat exchange tube bundles in cooling tower

Theoretical Investigation on Thermal Performance of New Structure Closed Wet Cooling Tower

Performance Analyses of Counter-Flow Closed Wet Cooling Towers Based on a Simplified Calculation Method

Experimental Study on Performance of a Closed Wet Cooling Tower for Air Wet-Bulb Temperature near 0°C

Theoretical and computational analysis of closed wet cooling towers and its applications in cooling of buildings

Thermal and experimental analysis of cross-flow closed cooling tower

THEORETICAL AND EXPERIMENTAL STUDY ON THERMAL PERFORMANCE OF CLOSED WET COOLING TOWER

Application of CFD to closed-wet cooling towers

Numerical investigation on novel water distribution for natural draft wet cooling tower

Thermal Characteristics of Closed Wet Cooling Tower Using Different Heat Exchanger Tubes Arrangement

Deciphering the heat and mass transfer behaviors of staggered tube bundles in a closed wet cooling tower using a 3-D VOF model

Parametric study of closed wet cooling tower thermal performance

Three-Dimensional Numerical Study on Thermal Performance in A Natural Draft Wet Cooling Tower

Numerical and experimental study on performance of seawater cooling towers based on a comprehensive coupling model

Numerical Simulation of the Performance Characteristics of the Hybrid Closed Circuit Cooling Tower