Abstract:ORCs (Organic Rankine Cycles) are of great significance for energy conservation and CO2 emission reductions owing to their usage in converting low grade waste heat to electrical power. The working fluid properties are the key to getting good cycle performance. The advantages of CO2 and hydrocarbon working fluids for use in ORCs are investigated here for six binary mixtures: CO2+propane/n-butane/iso-butane/n-pentane/iso-pentane/neo-pentane. A transcritical ORC simulation program was used to predict the cycle performance for various hydrocarbon mass fraction working fluids for a turbine inlet temperature of 453.15 K and inlet pressure of 1.3pc. The predicted cycle performance is used to divide the six working fluids into three categories relative to the thermal efficiency of an ORC using pure CO2. The first working fluid type (CO2+propane) has increasing efficiencies with increasing hydrocarbon mass fraction while the second type have maximum thermal efficiencies at hydrocarbon mass fractions of 0.3, and the third type has maximums at a mass fraction of 0.2. In addition, the thermodynamics relative efficiency, ξ, is highest for CO2+propane and then decreases for CO2+iso-butane, CO2+ n-butane, CO2+neo-pentane, CO2+iso-pentane, and CO2+n-pentane with the lowest. Then, the cycle efficiencies of the three working fluid types were analyzed from the perspective of the hydrocarbon molecular structure. The results show that longer main carbon chains and branched carbon chains have larger pc and Tc, with this critical property leading to higher efficiencies at low hydrocarbon mass fractions. Lower p′c and T′c lead to higher efficiencies at high hydrocarbon concentrations. Thus, there is a trade-off between the cycle efficiency and the hydrocarbon mass fraction. Finally, the three best working fluid mixtures, 0.3CO2/0.7propane, 0.7CO2/0.3neo-pentane and 0.8CO2/0.2pentane, were further analyzed according to their cycle characteristics. The 0.3CO2/0.7propane mixture working fluid had the best cycle efficiency for these conditions.

Parameters analysis and techno-economic comparison of various ORCs and sCO 2 cycles as the power cycle of Lead–Bismuth molten nuclear micro-reactor

Parameters Analysis and Techno-Economic Comparison of Various ORCs and Sco2 Cycles As the Power Cycle of Lead–Bismuth Molten Nuclear Micro-Reactor

Comparison study of Trilateral Rankine Cycle, Organic Flash Cycle and basic Organic Rankine Cycle for low grade heat recovery

Comparative Investigations on Dynamic Characteristics of Basic ORC and Cascaded LTES-ORC under Transient Heat Sources

Experimental Investigations on Dynamic Performance of Organic Rankine Cycle Integrated with Latent Thermal Energy Storage under Transient Engine Conditions

Optimization of Organic Rankine Cycle Involving Operating Conditions and Work Fluids and Heat Integration

Simultaneous Optimization for Organic Rankine Cycle Design and Heat Integration

Thermodynamic Analysis and Optimization of Binary CO2-Organic Rankine Power Cycles for Small Modular Reactors

Thermodynamic analysis and optimization of the combined supercritical carbon dioxide Brayton cycle and organic Rankine cycle‐based nuclear hydrogen production system

Exploration and Analysis of CO2 + Hydrocarbons Mixtures As Working Fluids for Trans-critical ORC

Design and Performance Analyses for a Novel Organic Rankine Cycle with Supercritical-Subcritical Heat Absorption Process Coupling

Thermo-economic analysis and multi-objective optimization of supercritical Brayton cycles with CO2-based mixtures

Thermo-economic analysis of a novel partial cascade organic-steam Rankine cycle

Analysis of the Thermodynamic Performance Limits of the Organic Rankine Cycle in Low and Medium Temperature Heat Source Applications

Performance Comparison and Analysis of a Combined Power and Cooling System Based on Organic Rankine Cycle

Performance Analysis and Parametric Optimization of Supercritical Carbon Dioxide Cycle with Bottoming Organic Rankine Cycle

Multi-objective optimization of supercritical CO 2 Brayton cycles for coal-fired power generation with two waste heat recovery schemes

Synthesis and simultaneous optimization of multi-heat source multi-pressure evaporation organic Rankine cycle with mixed working fluid

Techno-economic-environmental analysis and fluid selection of transcritical organic Rankine cycle with zeotropic mixtures

A comparative study of the energy, exergetic and thermo-economic performance of a novelty combined Brayton S-CO2-ORC configurations as bottoming cycles

Performance investigation and precooler design of a coupled supercritical CO 2 -based mixture Brayton cycle with absorption refrigeration cycle