Abstract:MAX phase materials have garnered significant attention due to their corrosion resistance, impressive antioxidation and high electrical and optical conductivity. One such material, Titanium Tin Carbide (Ti 2 SnC), has demonstrated notable nonlinear optical properties. The saturable absorption of Ti 2 SnC, embedded into a polyvinyl (PVA) film, was measured to assess its potential. The Ti 2 SnC -PVA film exhibited a calculated modulation depth of 7.8%. In the context of practical applications, the Ti 2 SnC-PVA film was employed as a saturable absorber (SA) in an Erbium-doped fiber laser (EDFL) cavity. This configuration enabled the generation of stable Q-switched and mode-locked pulse trains. Q-switched operation occurred in a pump power range of 51.67 mW–83.83 mW, reaching a peak pulse energy of 110.94 nJ. Transitioning to mode-locking operation, the laser cavity demonstrated efficiency in the pump power range of 105.27 mW–196.39 mW. At a pump power of 196.39 mW, the fiber laser cavity achieved its highest pulse energy of 5.42 nJ, characterized by a pulse width of 2.32 ps and a pulse repetition rate of 1.825 MHz. These results highlight the promising potential of Ti2SnC-PVA thin film as a cutting-edge material for applications in pulsed laser systems. The material's excellent nonlinear optical properties make it a compelling candidate for advancing the field of pulsed laser technology.

Utilizing iron phthalocyanines absorber for the generation of Q-switched and mode-locked pulses

Mode-locked and Q-switched mode-locked fiber laser based on a ferroferric-oxide nanoparticles saturable absorber

Passively Q-switched EDFL using Fe3O4-nanoparticle saturable absorber

Mode-locked soliton pulse generation using copper phthalocyanine absorber in long erbium-doped fibre laser cavity

Performance investigation of erbium-doped fiber laser based on cadmium chloride hydrate saturable absorber

Q-switched pulse operation in erbium-doped fiber laser subject to CdS nanoparticles-based saturable absorber deposit directly on the fiber ferrule

Q-switched fiber laser based on CdS quantum dots as a saturable absorber

Q-Switched Pulse Generation In L-Band Region With Polyacrylonitrile Saturable Absorber

Q-Switched pulse generation with an electro-deposited MoS2 film

Generation of Q-switched from a neodymium-doped fiber laser incorporated erbium oxide as a saturable absorber

Passively Q-switched erbium-doped fiber laser based on two-dimensional boron carbide nanoparticles as saturable absorber

Generation of Q-switched and mode-locked pulses in erbium-doped fiber ring laser using saturable absorption of Ti 2 SnC

Passively Q-switched and mode-locking fiber laser based on Sb2S3 saturable absorber

Ultrafast fiber laser at 1570 nm based on organic material as saturable absorber

Stable Nanosecond-Pulse Fiber Lasers Mode-Locked with Molybdenum Diselenide

Passively Q-switched Er-doped fiber laser based on carbon-doped silver nanoparticles saturable absorber prepared using laser ablation method

Nanosecond Pulse Generation in the C-Band Region Using Silver Sulfide as a Saturable Absorber

High-Power Mode-Locked Fiber Laser Using Lead Sulfide Quantum Dots Saturable Absorber

Femtosecond Pulsed Fiber Laser by an Optical Device Based on NaOH-LPE Prepared WSe2 Saturable Absorber

Q-switched Triple-Wavelength Erbium-Doped Fiber Laser with Black Phosphorus Absorber

Optimization of passive Q‐switched fiber laser employing MAX phase chromium aluminum carbide film