Abstract:A saturable absorber (SA) is one of the important components in a passive mode-locked fibre laser configuration to attain picosecond- to femtosecond-competent ultrashort pulses for fulfilling the imperatives of industries, particularly engineering and life sciences. The substantiation of a newfound SA in the generation of mode-locked pulses utilising molybdenum gallium carbide (Mo 2 Ga 2 C)—a MAX phase nanomaterial—was authenticated in this work. A Mo 2 Ga 2 C SA thin film was fabricated via a simple solution with polyvinyl alcohol (PVA) as the hosting medium. Linear absorption, modulation depth, non-saturable absorption, and saturation intensity of the 17.141-μm Mo 2 Ga 2 C SA were found to be 8.29%, 19.82%, 9.21% and 2.85 kW/cm 2 , respectively. The fabricated Mo 2 Ga 2 C SA was then implemented into an erbium-doped fibre laser (EDFL) system to realise the eminently stable mode-locked fibre laser at a centre wavelength of 1559.2 nm and rudimentary signal-to-noise ratio (SNR) of 54.8 dB. The pulse repetition rate and pulse width were measured to be 968.72 kHz and 2.028 ps successively. The maximum pulse energy and peak power are 10.219 nJ and 24.12 mW. In corroboration with previous reports, the implementation of Mo 2 Ga 2 C as a mode-locker is propitious in validating the impressively stable and ultrafast nonlinear fibre laser system for further multidisciplinary applications, for instance, medical instrumentation, sensing and range finding, communication, and military due to its excellent optical, physical, thermal, and mechanical properties.

Nanosecond Pulse Generation in the C-Band Region Using Silver Sulfide as a Saturable Absorber

Silver Sulfide Nanoparticles As Nonlinear Optical Modulators for Q-switching and Mode-locking at 2 Μm

Q-switched pulse operation in erbium-doped fiber laser subject to CdS nanoparticles-based saturable absorber deposit directly on the fiber ferrule

Passively Q-switched Er-doped fiber laser based on carbon-doped silver nanoparticles saturable absorber prepared using laser ablation method

Q-Switched Pulse Generation In L-Band Region With Polyacrylonitrile Saturable Absorber

Femtosecond Er-Doped All-Fiber Laser with High-Density Well-Aligned Carbon-Nanotube-Based Thin-Film Saturable Absorber

Stable Nanosecond-Pulse Fiber Lasers Mode-Locked with Molybdenum Diselenide

Q-switched fiber laser based on CdS quantum dots as a saturable absorber

Q-Switched pulse generation with an electro-deposited MoS2 film

Utilizing iron phthalocyanines absorber for the generation of Q-switched and mode-locked pulses

Passively Q-switched and mode-locking fiber laser based on Sb2S3 saturable absorber

Femtosecond Pulsed Fiber Laser by an Optical Device Based on NaOH-LPE Prepared WSe2 Saturable Absorber

Molybdenum Gallium Carbide as Saturable Absorbers in 1.5-μm Passive Mode-Locked Fibre Laser

Passively Q-switched erbium-doped fiber laser based on two-dimensional boron carbide nanoparticles as saturable absorber

Performance investigation of erbium-doped fiber laser based on cadmium chloride hydrate saturable absorber

Nanosecond Pulse Generation at 2.7 Μm from a Passively Q-Switched Er:Y2O 3 Ceramic Laser

Generation of Q-switched and mode-locked pulses in erbium-doped fiber ring laser using saturable absorption of Ti 2 SnC

Passively Mode-Locked Er-Doped Fiber Laser Based on Sb2S3-PVA Saturable Absorber

Mode-locked soliton pulse generation using copper phthalocyanine absorber in long erbium-doped fibre laser cavity

Pulsed-laser-ablated gold-nanoparticles saturable absorber for mode-locked erbium-doped fiber lasers

Molybdenum gallium carbide coated D-Shape fiber for nanosecond dark pulse generation in erbium-doped fiber laser