Abstract:Problem statement. The selective laser melting method is a promising technology for the production of parts from heat-resistant alloys. Traditional methods of manufacturing such parts require additional technological equipment and processing, which increases the time of production preparation and, as a result, to the creation of a large number of raw materials. Selective laser melting allows you to produce parts of a complex configuration without the need for additional equipment. Molding of parts using additive technologies, which ensure a reduction in product preparation time, mechanical processing operations, and an increase in the efficiency of material use. Their application in the technological cycle of manufacturing products is an urgent task today. However, before the introduction into the technological process of forming products from heat-resistant alloys by the selective laser melting method, it is necessary to carry out a comprehensive analysis of the mechanical and technological characteristics of the material and its microstructure, which affects the final properties of the parts. The purpose of the article. Investigation of the possibility of implementing the selective laser melting method for the production of parts from strong alloys, analysis of the mechanical characteristics of the material, as well as the microstructure, which affects the final properties of the parts. Conclusions. Studies have shown that the selective laser melting method is effective for the production of complex parts from heat-resistant alloys. The obtained data on the mechanical properties after heat treatment of the Inconel718 alloy demonstrate its compliance with the requirements of the AMS 5662 standard and its suitability for working under extreme conditions. In the microstructure, highlighted features are revealed, which are characteristic of the selective laser melting method, as well as the presence of visible tracks and a special texture − elongated grains in the direction of growing parts. Research points to the potential of additive technologies in improving technological processes and properties of alloys for the production of heat-resistant alloy parts.

Effect of Powder Composition Characteristic Temperatures And Input Energy Density on Microstructure and Internal Stresses of Nickel- and Cobalt-Based Heat-Resistant Alloys Produced by Selective Laser Melting. Part 2

In-situ Study of Microstructure and Mechanical Properties of GH3536 Alloy Manufactured by Selective Laser Melting at 750 °C

Effect of heat treatment on the microstructural evolution of a nickel-based superalloy additive-manufactured by laser powder bed fusion

Effect of Volume Energy Density on Selective Laser Melting Niti Shape Memory Alloys: Microstructural Evolution, Mechanical and Functional Properties

High-temperature mechanical properties of nickel-based superalloys manufactured by additive manufacturing

Microstructure and Mechanical Properties of FeCoNiCrAlx High-entropy Alloys by Selective Laser Melting

INVESTIGATION OF THE STRUCTURE AND PROPERTIES OF FERROUS NICKEL ALLOYS AFTER MOLDING BY SELECTIVE LASER MELTING

Selective Laser Melting of Pre-Alloyed NiTi Powder: Single-Track Study and FE Modeling with Heat Source Calibration

Study of the Effect of Selective Laser Melting Parameters on the Structure and Physico-Mechanical Properties of a Blank Made of Stainless Chromium-Nickel Steel

Features of the Macro-, Micro-, and Fine Structure of the Nickel Superalloy Product Material Formed by the Method of Electron Beam Additive Manufacturing

Mechanical Behavior of a Medium-Entropy Fe65(CoNi)25Cr9.5C0.5 Alloy Produced by Selective Laser Melting

Effect of treatment mode on microstructure evolution and mechanical properties of nickel-based superalloy fabricated by selective laser melting

Design, microstructure and thermal stability of a novel heat-resistant Al-Fe-Ni alloy manufactured by selective laser melting

Effect of beam energy density characteristics on microstructure and mechanical properties of Nickel-based alloys manufactured by laser directed energy deposition

Microstructure Evolution of FeNiCoCrAl1.3Mo0.5 High Entropy Alloy during Powder Preparation, Laser Powder Bed Fusion, and Microplasma Spraying

The Effect of Laser Remelting during SLM on Microstructure and Mechanical Properties of CoCrFeNiNb0.25

Microstructure, mechanical properties and strengthening mechanisms of IN738LC alloy produced by Electron Beam Selective Melting

Research status on the effect of energy density on the forming microstructure and properties of nickel-based superalloys for laser additive manufacturing

Additive Manufacturing of Cobalt-Based Dental Alloys: Analysis of Microstructure and Physicomechanical Properties

Microstructure, Mechanical Properties, and Fatigue Fracture Characteristics of High-Fracture-Resistance Selective Laser Melting Al-Ni-Cu Alloys

Understanding Mechanical Characteristics of FeNiCrCoCu HEA in Nanoscale Laser Powder Bed Fusion via Molecular Dynamics