Electrochromic Adaptability of NiO x Films Modified by Substrate Temperature in Aqueous and Non‐Aqueous Electrolytes

Yilin Ding,Mengying Wang,Zheyue Mei,Lei Liu,Jiaming Yang,Xiaolan Zhong,Mei Wang,Xungang Diao

DOI: https://doi.org/10.1002/admi.202102223

IF: 5.4

2022-03-07

Advanced Materials Interfaces

Abstract:Advanced Materials Interfaces, EarlyView.

materials science, multidisciplinary,chemistry

What problem does this paper attempt to address?

Electrochromism of titanium oxide thin films

Ye Yonghong,Zhang Jiayu,Gu Peifu,Liu Xu,Tang Jinfa

DOI: https://doi.org/10.1016/S0040-6090(96)08986-9

IF: 2.1

1997-01-01

Thin Solid Films

Abstract:The electrochromic characteristics of titanium oxide films prepared by reactive thermal evaporation and ion-assisted deposition have been investigated. It is found that their properties depend on the deposition and post-annealing process, and there is slight conflict between charge capacity and cyclic stability. With a compromise, a TiO2 film with above 7.6 mC cm(-2) Li+ ion capacity and above 10(6) color/bleach cycles is gained. The film is deposited at 50 similar to 80 degrees C substrate temperature and 250 similar to 260 degrees C post-annealing in an oxidizing atmosphere. With the post-annealed TiO2 film as the counter electrode, durable electrochromic devices, glass/ITO/TiO2/PPG-PMMA-LiClO4/WOx/ITO, are obtained. (C) 1997 Elsevier Science S.A.
Nickel Oxide Electrochromic Films: Mechanisms, Preparation Methods, and Modification Strategies - A Review

Fangyuan Zhao,Tingting Chen,Yu Zeng,Jiarui Chen,Jijie Zheng,yong liu,Gaorong Han

DOI: https://doi.org/10.1039/d4tc00114a

IF: 6.4

2024-04-04

Journal of Materials Chemistry C

Abstract:Intelligent energy-saving technologies have received widespread global attention as the continuous intensification of energy issues. Electrochromic technology provides dynamically adjustable optical properties to reduce building energy consumption. NiO is one of the most widely studied and applied anode electrochromic materials due to its excellent high optical modulation capability, fast response, and electrochemical stability. In this review, after briefly introducing the research background of electrochromic devices, we focus on the electrochromic mechanism in different electrolytes, preparation methods, and modification strategies of NiO films. The widely accepted electrochromic mechanism of NiO is the reversible conversion between colorless Ni2+ and colored Ni3+ and Ni4+. By optimizing the preparation parameters, the morphology, crystal structure, and chemical state of the NiO film can be adjusted to improve the electrochromic performance. Meanwhile, finding a preparation method with a large area and cost-effectiveness has become an urgent task. The electrochromic performance of NiO can be further enhanced by using appropriate modification strategies, such as surface modification, nanomaterialization, material compounding, doping, and electrolyte design. Finally, the future development prospects of NiO electrochromic films and electrochromic devices were explored.

materials science, multidisciplinary,physics, applied
One-Step Fabrication Of Nanostructured Nio Films From Deep Eutectic Solvent With Enhanced Electrochromic Performance

Guofa Cai,Jiangping Tu,Changdong Gu,Jiaheng Zhang,Jiao Chen,Ding Zhou,ShaoJun Shi,Xiuli Wang

DOI: https://doi.org/10.1039/c3ta01055d

IF: 11.9

2013-01-01

Journal of Materials Chemistry A

Abstract:Nanostructured NiO thin films were directly prepared by simple and efficient electrodeposition in a choline chloride-based ionic liquid. Uniform granules and some open voids between these granules are observed in the film deposited at 70 degrees C, while the film becomes compact and the NiO particles are 2-6 nm in size when the electrodeposition temperature is 90 degrees C. The optical transmittance of the film increased with the increase of the electrodeposition temperature. Although the electrochromic switching and reaction kinetics of the NiO film deposited at low temperature are fast due to the presence of metallic Ni and some voids, little transmittance modulation occurs in the wavelength range of 300-900 nm. In contrast, the NiO film deposited at high temperature exhibits high optical modulation of 67% at 550 nm, high coloration efficiency (98 cm(2) C-1 at 400 nm, 92 cm(2) C-1 at 550 nm and 51 cm(2) C-1 at 750 nm), good memory effect and cycling durability.
Electrochromic Properties of Ni/NiO/rGO Nanocomposite Films Prepared by a Facile Sol-Gel Technique

Shanshan Jiang,Guangzhong Yuan,Chenzheng Hua,Shahid Khan,Zhizheng Wu,Yong Liu,Jianxun Wang,Chenlu Song,Gaorong Han

DOI: https://doi.org/10.1149/2.1231713jes

IF: 3.9

2017-01-01

Journal of The Electrochemical Society

Abstract:Transparent electrochromic nickel oxide films with Ni-rGO (reduced graphene oxide) co-doping were deposited on ITO substrates by a facial sol-gel method. The structure characterization of the composite film was carried out by XRD, SEM and TEM, and proposed the growth model to illustrate the fabrication process. The electrochromic properties of Ni/NiO/rGO films have been studied in 1 mol/L KOH aqueous electrolyte via cyclic voltammetry, chronoamperometry and visible light transmission. The optimum Ni/NiO/rGO composite films with a thickness about 80 nm exhibits the maximum anodic/cathodic diffusion coefficient of 6.28 x 10(-9) cm(2) . s(-1)/4.94 x 10(-9) cm(2) . s(-1) and outstanding electrochromic properties, including the stable and reversible coloration-bleaching cycles, and large coloration efficiency (48.15 cm(2) . C-1), as well as large transmittance modulation (51.6%) and fast coloration/bleaching response speed (4.2 s/2.4 s) at a wavelength of 550 nm. These characteristics open the possibility to the industrial applications, particularly for the large-area electrochromic devices. (c) 2017 The Electrochemical Society. All rights reserved.
Enhanced electrochromic performance on novel W@NiO doped composite electrode via pre-annealing

Yilin Ding,Mengying Wang,Zheyue Mei,Lei Liu,Xiaolan Zhong,Mei Wang,Xungang Diao

DOI: https://doi.org/10.1016/j.vacuum.2022.111070

IF: 4

2022-07-01

Vacuum

Abstract:To improve the electrochromic properties of traditional sputtering NiO films, we prepare a novel W@NiO composite films depending on dual impact of doping and pre-annealing. The small quantity of doping tungsten is guaranteed by unique stacked targets sputtering mode. On this basis, different substrate temperature is set to obtain a series of samples. The obtained 200 °C W@NiO films show obvious improvement compared with room-temperature pure NiO films and literature results. Specially, the charge density can get ∼60 mC/cm2, the optical modulation can realize ∼83% at 550 nm, the coloration efficiency can up to 65.27 cm2/C at 550 nm, while the specific capacitance can achieve ∼30 mF/cm2. Additionally, the W@NiO-200 shows potential in prominent cyclic reversibility, rapid response time, prolonging cycle lifespan. This study provides a new strategy for preparation of high-quality electrochromic NiO films by sputtering technology.

materials science, multidisciplinary,physics, applied
Direct fabrication of electrochromic Ni-MOF 74 film on ITO with high-stable performance

Ning Zhang,Yuhong Jin,Qianqian Zhang,Jingbing Liu,Yongzhe Zhang,Hao Wang

DOI: https://doi.org/10.1007/s11581-021-04112-y

IF: 2.961

2021-06-10

Ionics

Abstract:Metal–organic framework (MOF) is a promising electrochromic material due to its high specific surface area and tunable pore size, which can benefit the fast transportation of ion/charge. Here, a simple solvothermal deposition method for fabrication of Ni-MOF 74 electrochromic films on ITO is developed. It is found that the reaction temperature has played an important role in the morphology and electrochromic performance of as-prepared Ni-MOF 74 film. The film prepared at the optimized temperature exhibits the best electrochromic performance with a rapid switching speed (the coloration/bleaching time = 24.5/23.5 s). In addition, the optimized film displays a high optical contrast of 44.4% at 550 nm and can be stably switched for 650 cycles with < 21.5% contrast attenuation. The electrochromism of Ni-MOF 74 can be attributed to the oxidized and reduced states of 2,5-dihydroxyterephthalic acid ligands. This simple method can be broaden to fabricate other metal-based MOF films for electrochromic applications.

chemistry, physical,physics, condensed matter,electrochemistry
Citric Acid Induced W18O49 Electrochromic Films with Enhanced Optical Modulation

Junliang Xie,Bin Song,Gaoling Zhao,Gaorong Han

DOI: https://doi.org/10.1063/1.5026893

IF: 4

2018-01-01

Applied Physics Letters

Abstract:Electrochromic materials exhibit promising applications in energy-saving fields for their ability to control heat from outdoors. Nanostructured W18O49 has drawn attention for its one-dimensional structure to transfer charge efficiently as a remarkable electrochromic material. W18O49 bi-layer films were fabricated through a facile one-step solvothermal process with citric acid as a chelating agent. The addition of citric acid improved the deposition on the substance, and a nanostructured film with a denser layer at the bottom and a tussock-like upper layer was obtained. The bi-layer film exhibited an enhanced optical modulation of 68.7%, a coloration efficiency of 82.1 cm(2)/C with stability over 400 cycles, and fast response times (1.4 s and 2.3 s for bleaching and coloring), with expectation to be applied in the electrochromic field. Published by AIP Publishing.
Improved electrochromic device based on mesoporous TiO2 and NiO films

Bo Zhang,Hui Wang,Yiwei Lu,Yang Song,Yanlin Li,Yuanyuan Tian

DOI: https://doi.org/10.1142/s1793604725510014

IF: 1.4901

2024-08-30

Functional Materials Letters

Abstract:Functional Materials Letters, Ahead of Print. Fabrication of electrochromic films with micro/nanostructures is one of the most feasible ways to improve their properties for high-performance electrochromic devices (ECDs). In this work, mesoporous TiO2 and NiO electrochromic films are prepared by sol-gel technique with an auxiliary solvent of F108 (PEO[math]PPO[math]PEO[math]). By adjusting the content of F108 and heat treatment temperature, the transparent and uniform mesoporous films are successfully prepared. The TiO2 and NiO films are composed of inter-connected nanoparticles with a size of about 20 nm. The thicknesses of the films are about 300 nm and the mesoporous sizes are about 13 nm. The films have a short response time during the electrochromic process. When supplied with positive/negative voltages for 50 s, the coloring/bleaching times of TiO2 and NiO mesoporous films are 15/13 and 17/12 s, respectively. The ECD fabricated with TiO2 and NiO mesoporous films shows good electrochromic properties: short response time (14/19 s, for bleaching/coloring time), wide transmittance modulation range ([math]37.21% at 540 nm), high coloration efficiency (CE) (100.6 cm2/C at 540 nm) and outstanding cycle stability (800 cycles). These are attributed to the mesoporous channels of films, which can increase reaction activity site, shorten ions transport path, and thus improve electrochromic reaction.

materials science, multidisciplinary
Interlaced NiCoO2 nanoparticle/nanosheet films for electrochromic energy storage devices with wide-band optical modulation and robust stability

Yongchao Liu,Yu Zhong,Huanhuan Liu,Pengyang Lei,Shiyou Liu,Jinhui Wang,Guofa Cai

DOI: https://doi.org/10.1039/d4tc02789b

IF: 6.4

2024-11-01

Journal of Materials Chemistry C

Abstract:Electrochromic smart windows offer an energy-saving route and a comfortable indoor environment for buildings due to their dynamic modulation of solar radiation. However, it is still challenging to facilely fabricate electrochromic films with large optical modulation in a wide wavelength band, neutral coloration, and long-term cycling stability. Herein, a type of in-situ grown NiCoO2 bimetallic oxide film on fluorine-doped tin oxide (FTO) substrates with interlaced nanoparticle/nanosheet structure is developed for electrochromism using a facile one-step solvothermal strategy. Owing to the unique structure, the NiCoO2 film delivers a neutral transparent-to-brown tinting, wide-band modulation (54.67% at 550 nm, 34.8% at 900 nm) in the visible-near-infrared region, fast switching speed (9/8.2 s), and high coloration efficiency (44.5 cm2/C at 550 nm). Moreover, the solvothermal growth approach enables good bonding of the NiCoO2 to the substrates, exhibiting excellent cycling stability of 2500 cycles. Additionally, a model of the smart window with the dual functions of electrochromism and energy storage was assembled using NiCoO2 film (electrochromic layer) and reduced graphene oxide (rGO) film (ion storage layer), realizing the visualization of the stored energy level through the color change. It is believed that this work would provide fundamental insights for the exploration of high-performance electrochemical materials and devices.

materials science, multidisciplinary,physics, applied
All-solid-state Electrochromic Devices Based on WO3||NiO Films: Material Developments and Future Applications

Ding Zhou,Dong Xie,Xinhui Xia,Xiuli Wang,Changdong Gu,Jiangping Tu

DOI: https://doi.org/10.1007/s11426-016-0279-3

2016-01-01

Science China Chemistry

Abstract:Electrochromism refers to the persistent and reversible change of optical properties by an applied voltage pulse.Electrochromic(EC)devices have been extensively studied because of their commercial applications in smart windows of green buildings,display devices and thermal control of equipments.In this review,a basic EC device design is presented based on useful oxides and solid-state electrolytes.We focus on the state-of-the-art research activities related to the structures of tungsten oxide(WO 3 )and nickel oxide(NiO),summarizing the strategies to improve their EC performances and further applications of devices.
High durable TiO2 electrochromic films by Ni doping

Jiaze Yuan,Liufen Xia,Yue Wu,Zichen Liu,Yogendra Kumar Mishra,Luying He,Jian Xiong

DOI: https://doi.org/10.1007/s10854-024-12729-8

2024-05-16

Journal of Materials Science Materials in Electronics

Abstract:Doping with metal ions to enhance the electrochromic performance of single material is attracting widespread attention. In this work, undoped and nickel (Ni)-doped TiO 2 electrochromic films with different doping content (0.5, 1, and 5 wt%) were successfully prepared via hydrothermal approach combined with a spin-coated technique. The effect of Ni on the microstructure, morphology, electrochemical and electrochromic performance of TiO 2 films were deep studied by field emission scanning electron microscopy (FESEM), high-resolution transmission electron microscope (HR-TEM) and X-ray photoelectron spectroscopy (XPS) and UV–Vis–NIR spectrophotometry coupled with an electrochemical workstation. FESEM images show a porous microstructure formation in all the coated films. HR-TEM images show that all the films have a polycrystalline phase with a preferred orientation along the anatase (101) plane of TiO 2 . The anatase (101) lattice spacing of Ni-doped TiO 2 samples were gradually decreased to 0.355 nm, 0.351 nm and 0.342 nm as the doped Ni increased, respectively. XRD proves the HR-TEM result. The electrochemical analysis reveals that the appropriate 1% Ni doping presented the most remarkable electrochromic performance, including that the maximum ions diffusion coefficient of 9.65 × 10 –10 cm 2 /s, the fastest coloring/bleaching switching time of 12.75 s and 1.99 s. Moreover, the 1% Ni-doping TiO 2 electrochromic film showed superior cyclic performance–little attenuation occurred after 200 cycles, whereas the undoped sample decayed almost by half after 100 cycles. The study provided valuable insights for promoting the potential applications of nickel metal-doped electrochromic materials.

materials science, multidisciplinary,engineering, electrical & electronic,physics, applied, condensed matter
Electrochromic Properties of Perovskite NdNiO 3 Thin Films for Smart Windows

Yifei Sun,Qi Wang,Tae Joon Park,Thomas Edward Gage,Zhen Zhang,Xuejing Wang,Di Zhang,Xing Sun,Jiazhi He,Hua Zhou,Daw Gen Lim,Chengzi Huang,Haoming Yu,Xuegang Chen,Haiyan Wang,Jianguo Mei,Eric Deguns,Shriram Ramanathan

DOI: https://doi.org/10.1021/acsaelm.1c00030

IF: 4.494

2021-03-24

ACS Applied Electronic Materials

Abstract:Semiconductors with electrically tunable band gaps are of great interest in controlling transparency to electromagnetic radiation. Thin films of perovskite nickelate NdNiO3 (NNO), a class of correlated oxides, were deposited on single-crystal (LaAlO3 (LAO)) and polycrystalline (fluorine-doped tin oxide-coated glass (FTO)) substrates by magnetron sputtering, chemical solution deposition (CSD), and atomic layer deposition (ALD). Their electrochromic behaviors were investigated using a three-electrode setup in basic (KOH solution, pH = 12) electrolyte. During bleaching/coloration process, the proton intercalation/deintercalation and simultaneous electron compensation in the NNO lattice under electrical bias led to crossover of the material between the pristine-conducting phase (Ni3+) and the strongly correlated insulating phase (Ni2+), which serves as the working principle for electrochromic (tunable opacity in the visible range) behavior. Cyclic voltammetry (CV) scans demonstrate that NNO films are electrochemically stable in basic solutions for all three film deposition methods explored here. CV scans at varying rates enabled the extraction of diffusion coefficient of protons in thin film NNO, which is ∼10–7 cm2 s–1 among all films studied. Large light transmittance modulation by bleaching and coloration was observed on films grown on both LAO and FTO substrates, suggesting its potential as an electrochromic material candidate for smart windows and optical shutter applications. Porous NNO films obtained by chemical solution deposition tend to demonstrate stronger electrochromic activity than dense films grown by sputtering or ALD.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaelm.1c00030?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaelm.1c00030</a>.Atomic layer deposition process details, atomic layer deposition process optimization experiments, and optical images of NNO/FTO samples at pristine and bleached states (<a class="ext-link" href="/doi/suppl/10.1021/acsaelm.1c00030/suppl_file/el1c00030_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

materials science, multidisciplinary,engineering, electrical & electronic
Electrochromic Properties of Porous NiO Thin Films Prepared by a Chemical Bath Deposition

X. H. Xia,J. P. Tu,J. Zhang,X. L. Wang,W. K. Zhang,H. Huang

DOI: https://doi.org/10.1016/j.solmat.2008.01.009

IF: 6.9

2008-01-01

Solar Energy Materials and Solar Cells

Abstract:Highly porous nickel oxide thin films were prepared on ITO glass by a simple chemical bath deposition (CBD) method in combination with a following heat-treatment process. XRD analysis revealed that the as-deposited precursor film contained β-Ni(OH)2 and γ-NiOOH, and they changed to cubic polycrystalline NiO after annealing. The FTIR results showed presence of free hydroxyl ion and water in the NiO thin films. The electrochromic properties of NiO thin films were investigated in an aqueous alkaline electrolyte (1M KOH) by means of transmittance, cyclic voltammetry (CV) and chronoamperometry (CA) measurements. The NiO thin film annealed at 300°C exhibited a noticeable electrochromism and good memory effect. The coloration efficiency was calculated to be 42cm2C−1 at 550nm, with a variation of transmittance up to 82%. The porous NiO thin films also showed good reaction kinetics with fast switching speed, and the coloration and bleaching time were 8 and 10s, respectively.
Aluminum-ion-intercalation nickel oxide thin films for high-performance electrochromic energy storage devices

Hongliang Zhang,Sheng Liu,Tao Xu,Weiping Xie,Guoxin Chen,Lingyan Liang,Junhua Gao,Hongtao Cao

DOI: https://doi.org/10.1039/d1tc04240h

IF: 6.4

2021-01-01

Journal of Materials Chemistry C

Abstract:Unleashing the true merits of aluminum-ion-intercalation nickel oxide thin films for EESDs by taking a closer look at the optical modulation, energy storage, and diffusion and reaction kinetics of the NiO/Al 3+ system.

materials science, multidisciplinary,physics, applied
Niobium Tungsten Oxides for Electrochromic Devices with Long-Term Stability

Cong Wu,Zewei Shao,Wenbo Zhai,Xinshui Zhang,Chang Zhang,Chengyu Zhu,Yi Yu,Wei Liu

DOI: https://doi.org/10.1021/acsnano.1c09234

IF: 17.1

2022-02-22

ACS Nano

Abstract:There is a keen interest in the use of electrochromic materials because they can regulate light and heat, thereby reducing the cooling and heating energy. However, the long response time, short cycle life, and high power consumption of an electrochromic film hinder its development. Here, we report an electrochromic material of complex niobium tungsten oxides. The Nb18W16O93 thin films in the voltage range of 0 to -1.5 V show good redox kinetics with the coloration time of 4.7 s and bleaching time of 4.0 s, respectively. The electrochromic device based on the Nb18W16O93 thin film has an optical modulation of 53.1% at a wavelength of 633 nm, with the coloration efficiency of ∼46.57 cm2 C-1. An excellent electrochemical stability of 78.1% retention after 8000 cycles is also achieved. These good performances are due to the fast and stable Li-ion intercalation/extraction in the open framework of Nb18W16O93 with multiple ion positions. Our work provides a strategy for electrochromic materials with fast response time and good cycle stability.
Temperature-Controlled Crystal Size of Wide Band Gap Nickel Oxide and Its Application in Electrochromism

Muyang Shi,Tian Qiu,Biao Tang,Guanguang Zhang,Rihui Yao,Wei Xu,Junlong Chen,Xiao Fu,Honglong Ning,Junbiao Peng

DOI: https://doi.org/10.3390/mi12010080

IF: 3.4

2021-01-14

Micromachines

Abstract:Nickel oxide (NiO) is a wide band gap semiconductor material that is used as an electrochromic layer or an ion storage layer in electrochromic devices. In this work, the effect of annealing temperature on sol-gel NiO films was investigated. Fourier transform infrared spectroscopy (FTIR) showed that the formation of NiO via decomposition of the precursor nickel acetate occurred at about 300 °C. Meanwhile, an increase in roughness was observed by Atomic force microscope (AFM), and precipitation of a large number of crystallites was observed at 500 °C. X-ray Diffraction (XRD) showed that the NiO film obtained at such a temperature showed a degree of crystallinity. The film crystallinity and crystallite size also increased with increasing annealing temperature. An ultraviolet spectrophotometer was used to investigate the optical band gap of the colored NiO films, and it was found that the band gap increased from 3.65 eV to 3.74 eV with the increase in annealing temperature. An electrochromic test further showed that optical modulation density and coloring efficiency decreased with the increase in crystallite size. The electrochromic reaction of the nickel oxide film is more likely to occur at the crystal interface and is closely related to the change of the optical band gap. An NiO film with smaller crystallite size is more conducive to ion implantation and the films treated at 300 °C exhibit optimum electrochromic behavior.

chemistry, analytical,nanoscience & nanotechnology,instruments & instrumentation,physics, applied
Preparation and electrochromic properties of NiO and ZnO-doped NiO thin films

Fei Wang,Jia Jia,Wei Zhao,Lan Zhang,Huizhong Ma,Na Li,Yunlong Chen,Fei Wang,Jia Jia,Wei Zhao,Lan Zhang,Huizhong Ma,Na Li,Yunlong Chen

DOI: https://doi.org/10.1016/j.mssp.2022.106986

IF: 4.1

2022-11-15

Materials Science in Semiconductor Processing

Abstract:Great optical contrast, high coloration efficiency, short response time, and good cycling stability have become the key to achieving large-scale application of electrochromic materials. In this paper, NiO thin films and ZnO-doped NiO thin films were prepared using magnetron sputtering technology. The microstructure and electrochromic properties of thin films were studied using Scanning Electron Microscopy (SEM), X-Ray Diffraction (XRD), electrochemical workstation and UV spectrophotometer, and the optimal preparation parameters of NiO thin films were found. The results show that NiO thin films with sputtering power of 150 W, Ar:O2 of 50:6, working pressure of 2.0 Pa and sputtering time of 20 min displayed the best electrochromic properties. In the electrolyte of 1 mol/L KOH, the optical contrast was 74.04% (@550 nm), the coloration efficiency was 8.73 cm2/C, the coloration time was 1.67 s, and the bleaching time was 1.26 s. ZnO-doped NiO thin films were prepared with the optimal parameters of NiO thin films. The results show that the ZnO-doped can improve the bleached state transmittance of the thin films. Moreover, the optical contrast reached 78.20% (@550 nm), the coloration efficiency was 11.20 cm2/C, and the cycling stability of the thin films was greatly improved. The results of electrochemical impedance measurement show that ZnO-doped in NiO thin films can reduce the charge transfer impedance and ion diffusion impedance, which is conducive to electrochromic reactions.

engineering, electrical & electronic,materials science, multidisciplinary,physics, condensed matter, applied
Nanofilms based on superstructured niobium tungsten oxide have high dual-functional potential for electrochromism and energy storage

Zongmin Li,Xuesong Gao,Yuan He,Qiaofeng Wang,Renfu Li,Liwen He,Mingyi Shang,Yuechan Li,Yujie Yan,Zixin Huang,Dongya Sun,An Xie

DOI: https://doi.org/10.1016/j.apsusc.2024.160394

IF: 6.7

2024-05-27

Applied Surface Science

Abstract:Niobium-tungsten oxide represents a novel type of bimetallic cathode electrochromic material. The superstructure is capable of accommodating a greater number of ions, which has been a hot material for research in recent years. In this paper, composite niobium-tungsten oxide materials were prepared on fluorine-doped tin oxide (FTO) substrates using the sol–gel spin-coating method. The particle size, band gap and response time of the electrochromic films were improved by regulating the film annealing temperature. As the annealing temperature was increased, the particle size of the Nb 18 W 16 O 93 film increased from 7.54 nm to 31.8 nm. Concurrently the band gap decreased, which enhanced the electrical conductivity of the material. The electrochemical and optical measurements show that the film has excellent properties, and by choosing the appropriate annealing temperature, the coloring efficiency reaches 55.3 cm 2 C −1 from 34.1 cm 2 C −1 , the switching time reaches t c = 4.3 s, t b = 3.5 s, and the energy storage capacity reaches 21.086 mF cm −2 at a surface current density of 0.05 mA cm −2 . The present work demonstrates that adjusting the annealing temperature can enhance the electrochromic and energy storage performance of the proposed films, which have for the potential to be utilized in electrochromic bifunctional applications.

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films
High-performance laminated NiO film striking a balance between the color-changing capability and cycling stability and its real application in bistable display

Chenchen Zhang,Zerui Li,Qiwei Zheng,Xinglong Zhou,Zicong Lin,Jiong Zhang,Xiufeng Tang,Yunfeng Zhan,Jianyi Luo

DOI: https://doi.org/10.1016/j.solmat.2024.112729

IF: 6.9

2024-01-29

Solar Energy Materials and Solar Cells

Abstract:Electrochromic (EC) technology is highly desirable in energy-conserving bistable displays as it can dynamically modulate color changes under small voltages and maintain the changed color after the power is cut off. For its practical application, low cost, easy fabrication and good durability are crucial. The shoulder-by-shoulder EC structure is talented in achieving low cost and easy fabrication because the counter electrode and its corresponding conductive layer were not necessary in it. Moreover, the EC material determines the stability against light radiation and long-term use. Herein, crystalline NiO films were selected owing to their gifted structure stability in crystalline state , and were fabricated through the sputtering process at a high deposition rate of 50 nm/min. The NiO film was further optimized to a laminated structure with the room-temperature-deposited NiO at the top and the 100 °C-deposited NiO at the bottom adjacent to ITO substrates as the adhesive layer. A high optical modulation rate of 59 % and excellent cycling stability with only 6 % degradation over 3000 cycles were achieved. Bistable price tags were then designed using the high-performance laminated NiO film and shoulder-by-shoulder EC structure. Thus fabricated EC material will significantly advance the applications of EC technology in various intelligent display scenarios.

materials science, multidisciplinary,physics, applied,energy & fuels
Influence of Hf doping on structural, morphological, optical and electrochemical properties of NiO thin films: Electrochromic application

B. Brioual,A. El-Habib,Z. Rossi,A. Aouni,M. Addou,M. Diani,M. Jbilou

DOI: https://doi.org/10.1016/j.jssc.2024.124637

IF: 3.3

2024-05-01

Journal of Solid State Chemistry

Abstract:In this study, the authors investigated the influence of hafnium doping on the properties of NiO thin films using the spray pyrolysis (SP) method. A comprehensive analysis was conducted to evaluate the structural, morphological, optical, and electrochemical characteristics of the deposited films. Techniques such as X-ray diffraction analysis (XRD), Raman spectroscopy, scanning electron microscopy (FESEM), energy dispersive analysis by X-ray (EDS), UV–Vis–NIR spectrophotometry, cyclic voltammetry (CV), and chronoamperometry (CA) were employed. XRD examination revealed that the NiO thin films exhibit a polycrystalline cubic phase, with a preferred orientation along the (111) plane. The successful integration of Hf ions into the NiO matrix was confirmed by the Raman spectrum. SEM images depicted the formation of dense and uniform nanograins on all film surfaces, free from any cracks. EDS analysis and elemental mapping indicated uniform and homogeneous distribution of Ni, O, and Hf elements across the films. The optical analysis suggested a decrease in the optical band gap energy from 3.54 eV to 3.49 eV with an increase in hafnium doping concentration. Electrochemical results revealed a continuous improvement in specific capacitance with Hf doping. The NHf6 sample reached 65 F. g−1 at 5 mV s−1, compared to 46 F. g−1 at 5 mV s−1 for the NHf0 sample. However, the NHf4 film exhibited the highest optical density variation (49%), shortest response times (tb = 3.58 s, tc = 4.67 s), and the largest coloration efficiency (63.39 cm2/C), indicating enhanced electrochromic performance at this Hf doping rate. These findings suggest that Hf-doped NiO holds promise as a candidate for use as a counter-electrode in electrochromic devices.

chemistry, physical, inorganic & nuclear

Electrochromic Adaptability of NiO x Films Modified by Substrate Temperature in Aqueous and Non‐Aqueous Electrolytes

Electrochromism of titanium oxide thin films

Nickel Oxide Electrochromic Films: Mechanisms, Preparation Methods, and Modification Strategies - A Review

One-Step Fabrication Of Nanostructured Nio Films From Deep Eutectic Solvent With Enhanced Electrochromic Performance

Electrochromic Properties of Ni/NiO/rGO Nanocomposite Films Prepared by a Facile Sol-Gel Technique

Enhanced electrochromic performance on novel W@NiO doped composite electrode via pre-annealing

Direct fabrication of electrochromic Ni-MOF 74 film on ITO with high-stable performance

Citric Acid Induced W18O49 Electrochromic Films with Enhanced Optical Modulation

Improved electrochromic device based on mesoporous TiO2 and NiO films

Interlaced NiCoO2 nanoparticle/nanosheet films for electrochromic energy storage devices with wide-band optical modulation and robust stability

All-solid-state Electrochromic Devices Based on WO3||NiO Films: Material Developments and Future Applications

High durable TiO2 electrochromic films by Ni doping

Electrochromic Properties of Perovskite NdNiO 3 Thin Films for Smart Windows

Electrochromic Properties of Porous NiO Thin Films Prepared by a Chemical Bath Deposition

Aluminum-ion-intercalation nickel oxide thin films for high-performance electrochromic energy storage devices

Niobium Tungsten Oxides for Electrochromic Devices with Long-Term Stability

Temperature-Controlled Crystal Size of Wide Band Gap Nickel Oxide and Its Application in Electrochromism

Preparation and electrochromic properties of NiO and ZnO-doped NiO thin films

Nanofilms based on superstructured niobium tungsten oxide have high dual-functional potential for electrochromism and energy storage

High-performance laminated NiO film striking a balance between the color-changing capability and cycling stability and its real application in bistable display

Influence of Hf doping on structural, morphological, optical and electrochemical properties of NiO thin films: Electrochromic application