Abstract:Electrospun nanocomposite polymer blend poly(vinylidene difluoride-co-hexafluoropropylene) (PVDF-HFP)/poly(methyl methacrylate) (PMMA) membranes with a novel dispersion of x wt % of one-dimensional (1D) TiO2 nanofiber fillers (x = 0.0-0.8 in steps of 0.2) were developed using the electrospinning technique. The developed nanocomposite polymer membranes were activated using various redox agents such as LiI, NaI, KI, and tetrabutyl ammonium iodide (TBAI). Introduction of the 1D TiO2 nanofiber fillers improves the amorphous nature of the blended polymer membrane, as confirmed through X-ray diffraction (XRD) and Fourier transform infrared (FTIR), and yielded an electrolyte uptake of over 480% for a 6 wt % TiO2 nanofiber filler-dispersed sample. PVDF-HFP/PMMA-1D 6 wt % TiO2 nanofiber fillers with the LiI-based redox electrolyte provided a high conductivity of 2.80 × 10-2 S cm-1 and a power conversion efficiency (PCE) of 8.08% to their fabricated dye-sensitized solar cells (DSSCs). The observed better ionic conductivity and efficiency of the fabricated DSSCs could be due to the faster movement of the smaller-ionic-radius (Li) ions entrapped inside the amorphous polymer. This enhanced mobility of ions in the quasi-solid electrolyte leads to faster regeneration of the depleting electrons in the photoanode, resulting in improved efficiency. Further, the achieved high conductivity was analyzed in terms of the dynamics and relaxation mechanisms involved by the ionic charge carriers with complex impedance spectroscopy using a random barrier model and Havriliak-Negami formulation. It was observed that the high-conducting PVDF-HFP/PMMA-1D 6 wt % TiO2 nanofiber fillers with LiI-based redox electrolyte show better ac conductivity parameters such as a σ of 5.82 × 10-2 S cm-1, ωe (12685 rad s-1), τe (0.909 × 10-4 s), and n (0.578). Also, dielectric studies revealed that the high-conducting sample has a higher dielectric constant and subsequently high loss. The J-V characteristics were studied using the equivalent circuit of a single-diode model, and the parameters influencing the photovoltaic performance were determined by Symbiotic Organisms Search (SOS) algorithm. The results suggest that the high-efficient sample possesses a minimum series resistance of 1.33 Ω and a maximum shunt resistance of 997 Ω. Hence, the highest-conducting electrospun-blended polymeric nanocomposite (PVDF-HFP-PMMA-6 wt % TiO2 nanofiber fillers) with LiI-based redox agent and tert-butyl pyridine (TBP) additive as the polymer quasi-solid electrolyte nanofibrous membrane can be a better electrolyte for high-performance dye-sensitized solar cell applications.

Filling Two Needs with One Deed: Supercapacitor and Dye-Sensitized Solar Cells using Ionic Liquid Doped Polymer Electrolyte

Poly (ethyl methacrylate) mixed ionic liquid-trifluoromethanesulfonic chloride for electric double layer capacitor and dye-sensitized solar cells

Stable Efficient Solid-State Supercapacitors and Dye-Sensitized Solar Cells Using Ionic Liquid-Doped Solid Biopolymer Electrolyte

Ionic liquid doped solid polymer electrolyte: Synthesis, characterization and applications ICSEM-2021

Conducting Carbon Black Nano‐Filler Doped Polymer Electrolyte for Electrochemical Application

Synthesis of a series of novel imidazolium-containing ionic liquid copolymers for dye-sensitized solar cells

Novel photosensitizer for dye-sensitized solar cell based on ionic liquid–doped blend polymer electrolyte

Highly efficient ionic‐liquid based solid polymer electrolyte for energy device (RAFM 2022)

Preparation and Characterization of Novel Polymer-Based Gel Electrolyte for Dye-Sensitized Solar Cells Based on poly(vinylidene fluoride-co-hexafluoropropylene) and poly(acrylonitrile-co-butadiene) or poly(dimethylsiloxane) bis(3-aminopropyl) Copolymers

Ionic liquid (1-butyl-1-methylpyrrolidinium trifluoromethanesulfonate) doped polyethylene polymer electrolyte for energy devices

A Novel Composite Polymer Electrolyte Containing Room-Temperature Ionic Liquids and Heteropolyacids for Dye-Sensitized Solar Cells

Highly conducting corn starch doped ionic liquid solid polymer electrolyte for energy storage devices-RAFM 2022

Preparation of Poly(Acrylic Acid)/Gelatin/Polyaniline Gel-Electrolyte and Its Application in Quasi-Solid-State Dye-Sensitized Solar Cells

Ionic liquid effect for efficiency improvement in poly(methyl acrylate)/poly(vinyl acetate)-based dye-sensitized solar cells

Compositional dependence of electrochemical properties in biopolymer blend-based solid electrolytes doped with sodium perchlorate for EDLC applications

Ion dynamics and electrochemical performance of biopolymer phytagel and sodium thiocyanate-blended solid polymer electrolytes

A novel binary electrolyte 1-allyl-3-methylimidazolium dicyanamide ionic liquid/acetonitrile-iodide for sustainable dye-sensitized solar cells

Rational Design and Elucidation of Interfacial Dynamics in PMMA/PVDF Compatibilized Blends Through Solution Blending for Stable Quasi-Solid-State Dye-Sensitized Solar Cells

The conductivity and dielectric studies of polymer electrolytes based on iota-carrageenan with sodium iodide and 1-butyl-3-methylimidazolium iodide for the dye-sensitized solar cells

Novel Dispersion of 1D Nanofiber Fillers for Fast Ion-Conducting Nanocomposite Polymer Blend Quasi-Solid Electrolytes for Dye-Sensitized Solar Cells

Carboxymethyl Cellulose Based Biopolymer Electrolyte with Hybrid Fillers for Dye Sensitized Solar Cell