Abstract:Membrane technologies and materials development appear crucial for the hydrogen/natural gas separation in the impending transition to the hydrogen economy. Transporting hydrogen through the existing natural gas network could result less expensive than a brand-new pipe system. Currently, many studies are focused on the development of novel structured materials for gas separation applications, including the combination of various kind of additives in polymeric matrix. Numerous gas pairs have been investigated and the gas transport mechanism in those membranes has been elucidated. However, the selective separation of high purity hydrogen from hydrogen/methane mixtures is still a big challenge and nowadays needs a great improvement to promote the transition towards more sustainable energy source. In this context, because of their remarkable properties, fluoro-based polymers, such as PVDF-HFP and NafionTM, are among the most popular membrane materials, even if a further optimization is needed. In this study, hybrid polymer-based membranes were deposited as thin films on large graphite surfaces. Different weight ratios of PVDF-HFP and NafionTM polymers supported over 200 μm thick graphite foils were tested toward hydrogen/methane gas mixture separation. Small punch tests were carried out to study the membrane mechanical behaviour, reproducing the testing conditions. Finally, the permeability and the gas separation activity of hydrogen/methane over membranes were investigated at room temperature (25 °C) and near atmospheric pressure (using a pressure difference of 1.5 bar). The best performance of the developed membranes was registered when the 4:1 polymer PVDF-HFP/NafionTM weight ratio was used. In particular, starting from the 1:1 hydrogen/methane gas mixture, a 32.6% (v%) H2 enrichment was measured. Furthermore, there was a good agreement between the experimental and theoretical selectivity values.

Study on ammonia transport and separation in Aquivion® perfluoro sulfonated acid membranes

Preparation and Performance of Quaternary Ammonium Salt-Containing Methacrylate Copolymer-Based Ultrafiltration Membranes

Performance analysis of short-side-chain Aquivion® perfluorosulfonic acid polymer for proton exchange membrane water electrolysis

Nafion-PTFE hollow fiber composite membranes for ammonia removal and recovery using an aqueous-organic membrane contactor

Proton transport through interfaces in nanophase-separation of hydrated aquivion membrane: Molecular dynamics simulation approach

Vacuum treated amorphous MOF mixed matrix membrane for methane/nitrogen separation

Effects of Structurally Different Tertiary Amines on the Properties of Quaternized Anionic Exchange Membranes Potentially Applicable for Water Electrolysis

CO2/CH4 Separation in Amino Acid Ionic Liquids, Polymerized Ionic Liquids, and Mixed Matrix Membranes

Super selective ammonia separation through multiple-site interaction with ionic liquid-based hybrid membranes

NH3 separation membranes with self-assembled gas highways induced by protic ionic liquids

Post‐synthesis Amination of Polymer of Intrinsic Microporosity Membranes for CO2 Separation

Hybrid Fluoro-Based Polymers/Graphite Foil for H2/Natural Gas Separation

Carbon Molecular Sieve Membrane Reactors for Ammonia Cracking

Zwitterionic Polyamide Membranes Via In-Situ Interfacial Polymerization Modification for Efficient Pervaporation Dehydration

High-performance CO2/CH4 separation membrane fabrication with PVAm modified by the MOFs containing amine groups

Sulfonium-polyamide membranes for high flux Mg2+/Li+ separation

Viability of Total Ammoniacal Nitrogen Recovery Using a Polymeric Thin-Film Composite Forward Osmosis Membrane: Determination of Ammonia Permeability Coefficient

Ph Stable Thin Film Composite Poly(amine-Urea) Nanofiltration Membranes with Excellent Rejection Performance

Metallic Supported Pd-Ag Membranes for Simultaneous Ammonia Decomposition and H2 Separation in a Membrane Reactor: Experimental Proof of Concept

Promising Fluorine-Free Ion Exchange Membranes Based on a Poly(ether-block-amide) Copolymer and Sulfonated Montmorillonite: Influence of Different Copolymer Segment Ratios

Ammonia permeation and plasticization of glassy polymeric membranes