Abstract:Ultra-high-temperature ceramics (UHTCs) are optimal structural materials for applications that require extreme high temperature resilience (M p > 3000 °C), resistance to chemically aggressive environments, wear, and mechanical stress. Processing UHTCs with laser-based additive manufacturing (AM) has not been fully realized due to a variety of obstacles. In this work, selective laser reaction sintering techniques (SLRS) were investigated for the production near net-shape UHTC ceramics such as HfC, ZrC, TiC, HfN, ZrN, and TiN. Specifically, group IV transition metal and metal oxide precursor materials (<44 μm) were chemically converted and reaction-bonded into layers of UHTCs using single-step selective laser processing in 100 vol% CH 4 or NH 3 gas that might be compatible with prevailing powder bed fusion techniques. Conversion of either metals (Hf, Zr and Ti) or metal oxides (HfO 2 , ZrO 2 , and TiO 2 ) particles was first investigated to examine reaction mechanisms and volume changes associated with SLRS of single-component precursor systems. SLRS processing of metal or metal oxide alone produced near stoichiometric UHTC phases and yields up to >99.9 wt% total for carbides and nitrides and during the rapid reactive in-situ processing scheme. However, for single-phase feedstocks, gas-solid reactivity induced volumetric changes (correlated with the stochiometry of the rocksalt-type UHTC carbide and nitride products) resulted in residual stresses and cracking in the model-AM product layer. To mitigate conversion-induced stresses of single-phase precursors, composite metal/metal oxide precursors were employed to compensate for the volume changes of either the metal (which expands during conversion) or the metal oxide precursor (which contracts). While conversion of the optimized composite materials produced HfC layers with as little as +0.9% volume change, results indicated interparticle adhesion must be optimized to obtain robust UHTC-AM layers. Computational models of carbon and nitrogen diffusion in host transition metal lattices corroborated experimental results where a progressive particle conversion might inhibit interparticle diffusion unless laser processing parameters are carefully optimized to favor reaction bonding over discrete particle conversion. While this method presents a host of processing considerations, we demonstrate how this reactive approach may be viable for the AM of numerous UHTC materials that are not readily produced using current methods.

Laser-Induced Thermal Decomposition of Uranium Coordination Compounds with Non-oxidic Ligands to Produce Nitride and Carbide Materials

Formation of uranium oxy-carbide and uranium carbide via conversion of polymer covered uranium dioxide by laser-based thermal processing

Molten uranium dioxide structure and dynamics

Chemical durability and corrosion-induced microstructure evolution of compositionally complex titanate pyrochlore waste forms with uranium incorporation

Photolysis, Thermolysis, and Reduction of a Uranium Azide Complex Supported by a Double-Layer N–P Ligand

U(V) stabilization via aliovalent incorporation of Ln(III) into oxo‐salt framework

Macrocyclic Control of Electron Transfer to High Valent Uranium in Heterobimetallic Complexes

Reactions of Laser-Ablated U and Th with CO<sub>2</sub>: Neon Matrix Infrared Spectra and Density Functional Calculations of OUCO, OThCO, and Other Products

Thermalchemical and Thermodynamic Study of UN Nuclear Fuel Prepared by Carbothermal Reaction and Nitridation

Synthesis of propenone-linked covalent organic frameworks via Claisen-Schmidt reaction for photocatalytic removal of uranium

Polyepitaxial grain matching to study the oxidation of uranium dioxide

Synthesis of Carbon Nitride in Potassium Hydroxide Molten Salt for Efficient Uranium Extraction from Radioactive Wastewater

Dissolution kinetics and thermodynamics of uranium from a boltwoodite ore for nuclear fuel cycle application

Revealing Microstructure and the Associated Corrosion Mechanism of Al/amorphous Al2O3/Al Tri-Layer Coating Deposited on Depleted Uranium by Magnetron Sputtering

Reactive laser synthesis of ultra-high-temperature ceramics HfC, ZrC, TiC, HfN, ZrN, and TiN for additive manufacturing

Thermodynamic and experimental study of UC powders ignition

Initiation of nuclear reactions under laser irradiation of Au nanoparticles in the aqueous solution of Uranium salt

MOF-modified C3N4 for Efficient Photo-Induced Removal of Uranium under Air Without Sacrificial Agents

Design and Construction of the Uranyl Coordination Polymer with Multifunction Stimulus Response: Fluorescent Sensors for Halide Ions and Photochromism

Laser-Induced Plasmas of Plutonium Dioxide in a Double-Walled Cell

Laser Decontamination of a Fuel-Element Surface from Uranium-Plutonium Fuel Particles