Interfacial Pyro‐Phototronic Effect: A Universal Approach for Enhancement of Self‐Powered Photodetection Based on Perovskites with Centrosymmetry

Linjuan Guo,Huan Wang,Ziqing Xu,Ridong Cong,Lei Zhao,Suheng Zhang,Kai Zhang,Linjie Gao,Shufang Wang,Caofeng Pan,Zheng Yang

DOI: https://doi.org/10.1002/adfm.202306526

IF: 19

2023-09-27

Advanced Functional Materials

Abstract:A universal interfacial pyro‐phototronic effect approach for self‐powered photodetection utilizing various centrosymmetric metal halide perovskite semiconductors is demonstrated, including 3D perovskites such as MAPbBr3 and MAPbCl3, as well as 2D perovskites like (PEA)2PbI4. The observation of pyro‐phototronic effect‐enhanced photoresponses can be achieved by fabricating heterojunctions or Schottky junctions utilizing materials with centrosymmetry. Utilizing the pyro‐phototronic effect presents a potent approach to augment the efficacy of self‐powered photodetectors (PDs) that rely on metal halide perovskites (MHPs). Nevertheless, the pyro‐phototronic effect has thus far been restricted to perovskites possessing a non‐centrosymmetric crystal structure, limiting their scope of application. This study introduces a universal interfacial pyro‐phototronic effect (IPPE) strategy to MHP single crystals with centrosymmetry. The utilization of heterojunctions or Schottky junctions has resulted in the observation of typical four‐stage photoresponses with rapid speed, thereby significantly enhancing the performance of self‐powered PDs and expanding the spectral response range. The contact conditions, such as the choice of metals and surface smoothness, have an important impact on IPPE. The IPPE approach is a versatile technique that can be employed to fabricate self‐powered PDs based on diverse 3D and 2D perovskites. This study broadens the utilization of the pyro‐phototronic phenomenon in centrosymmetric perovskites, which offer advantages in producing optoelectronic devices with superior performance.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology

What problem does this paper attempt to address?

### Problems the paper attempts to solve

This paper aims to solve the problems faced in achieving high - efficiency self - powered photodetectors (PDs) using perovskite materials, especially metal - halide perovskites with centrosymmetric structures. Specifically, the paper focuses on the following aspects:

1. **Expanding the application range**:
- **Background**: Currently, the pyro - phototronic effect has been widely applied in non - centrosymmetric perovskite materials, but its application in centrosymmetric perovskite materials is limited.
- **Problem**: How to achieve a high - efficiency pyro - phototronic effect in perovskite materials with centrosymmetric structures, thereby broadening their application range in self - powered photodetectors.

2. **Improving performance**:
- **Background**: Traditional self - powered photodetectors usually rely on heterojunctions or Schottky junctions to enhance the built - in electric field, but these methods are limited in effectiveness in some cases.
- **Problem**: How to significantly improve the performance of self - powered photodetectors, including response speed, sensitivity, and response wavelength range, through the interface pyro - phototronic effect (IPPE).

3. **Optimizing contact conditions**:
- **Background**: Contact conditions (such as the choice of metal and surface smoothness) have an important impact on the pyro - phototronic effect.
- **Problem**: How to optimize these contact conditions to further enhance the pyro - phototronic effect, thereby improving the overall performance of the photodetector.

4. **Verifying universal applicability**:
- **Background**: Although the pyro - phototronic effect has been verified in some specific types of perovskite materials, its applicability in perovskite materials of different dimensions (3D and 2D) is still unclear.
- **Problem**: How to verify the universal applicability of the interface pyro - phototronic effect in various centrosymmetric perovskite materials, including 3D and 2D perovskite materials.

### Main research contents

1. **Experimental materials and methods**:
- The research selected three representative metal - halide perovskite materials with centrosymmetric structures: MAPbBr3, MAPbCl3, and (PEA)2PbI4.
- Single - crystal samples were prepared by different growth methods and were characterized in detail, including absorption spectra, photoluminescence spectra, and X - ray diffraction (XRD), etc.

2. **Device structure and performance testing**:
- Nine different types of photodetectors were fabricated, including structures based on Schottky junctions and heterojunctions.
- The electrical properties of these devices in the dark and under illumination were evaluated through current - voltage (I - V) and capacitance - voltage (C - V) measurements.
- The photoelectric response characteristics of these photodetectors under different laser power densities were systematically tested, verifying the significant enhancement effect of the interface pyro - phototronic effect on the photoelectric response.

3. **Mechanism analysis**:
- The working principle of the interface pyro - phototronic effect was analyzed in detail, including interface polarization caused by band bending, changes in polarization intensity due to temperature changes, and the resulting pyroelectric current.
- The four - stage photoelectric response behavior of different - structure photodetectors was explained through energy band diagrams and experimental data.

### Conclusion

This research successfully demonstrated that by constructing heterojunctions or Schottky junctions, a high - efficiency interface pyro - phototronic effect can be achieved in metal - halide perovskite materials with centrosymmetric structures. This method not only significantly improves the performance of self - powered photodetectors but also broadens their application range in optical detection and communication applications. In addition, the research also found that contact conditions (such as metal selection and surface smoothness) have an important impact on the interface pyro - phototronic effect, and optimizing these conditions can further improve the performance of the photodetector.