Abstract:Organic phase change material (PCM) is considered to be promising for building energy efficiency, as it can be directly incorporated into matrix resin to impart thermal storage capacity after being encapsulated in a shell to form phase change material microcapsule (EPCM). However, existing studies have shown that the encapsulation of organic shell materials negatively affects the inherent thermal storage efficiency of PCM and increases its fire hazard. Towards efficient utilization of the thermal storage efficiency of organic PCM and reduction of its fire hazard when applied to building insulation coatings, we decorated halloysite nanotube (HNT) with P, N component (p-HNT) and embedded it into EPCM (p-h-EPCM), which integrated the high thermal conductivity and flame retardancy of p-HNT and developed a high-performance EPCM for thermal regulation coatings. Specifically, p-h-EPCM possesses exceptional thermal stability and has an enthalpy of 113.21 J/g. After mixing ph-EPCM into epoxy resin (EP/p-h-EPCM), we further investigated its flame-retardant effect and temperature control performance in practical applications. The cone calorimeter (CCT) showed that EP/p-h-EPCM was 35.7 % lower in the peak of heat release rate (pHRR) and 18.97 % lower in the total heat release (THR) compared to the epoxy resin (EP) that incorporated the same mass of EPCM (EP/EPCM). Moreover, the small room test and thermal imager test results showed that EP/p-h-EPCM had the mildest temperature fluctuations of 8.68 degrees C and 5.23 degrees C when heating/cooling, respectively. Considering the favorable flame retardant effect and energy-efficient thermal regulation performance, the obtained p-h-EPCM has a broad prospect in the practical application of building temperature-control coatings.

Improved thermal energy storage, leak prevention and flame retardance of phase change material using halloysite nanotubes

Enhanced thermal performance of phase change material microcapsules using halloysite nanotubes

Thermal Energy Storage Performance of Paraffin-Based Composite Phase Change Materials Filled with Hexagonal Boron Nitride Nanosheets

Thermophysical Properties of a Novel Nanoencapsulated Phase Change Material

Thermophysical Properties of Paraffin-Based Composite Phase Change Materials Filled with Carbon Nanotubes

Phase Change Materials of Paraffin in H-Bn Porous Scaffolds with Enhanced Thermal Conductivity and Form Stability

Research on the modification of microencapsulated phase change material for thermal energy storage by nano-SiO2 and graphite

Thermal Comfort and Flame Retardant Performance of Novel Temperature-Control Coatings with Modified Phase Change Material Microcapsules

The thermal behavior and flame retardant performance of phase change material microcapsules with modified carbon nanotubes

Effect of Halloysite Nanotubes on the Conformation and Thermal Properties of Shape-Stable Phase Change Materials: A Molecular Dynamics Study

Investigation on the Melting Performance of a Phase Change Material Based on a Shell-and-Tube Thermal Energy Storage Unit with a Rectangular Fin Configuration

Synthesis and Thermal Properties of the Ma/Hdpe Composites with Nano-Additives As Form-Stable Pcm with Improved Thermal Conductivity

A synergistic improvement in heat storage rate and capacity of nano-enhanced phase change materials

INVESTIGATION OF POLYURETHANE-BASED HALLOYSITE NANOTUBE AS SOLID-SOLID PHASE CHANGE MATERIAL FOR THERMAL ENERGY STORAGE

Preparation and performance characterization of metal foam/paraffin/ single-walled carbon nanotube composite phase change material

Experimental Investigations on the Thermal Performance and Phase Change Hysteresis of Low-Temperature Paraffin/MWCNTs/SDBS Nanocomposite via Dynamic DSC Method

Flame retardant and leaking preventable phase change materials for thermal energy storage and thermal regulation

Preparation and characterization of carbon nanotube microcapsule phase change materials for improving thermal comfort level of buildings

Amino-Functionalized Single-Walled Carbon Nanotubes-Integrated Polyurethane Phase Change Composites with Superior Photothermal Conversion Efficiency and Thermal Conductivity

Thermal Properties of Myristyl Alcohol/polyvinyl Butyral/carbon Nanotubes As Composite Phase Change Materials for Thermal Energy Storage

Enhanced thermal energy storage of a paraffin-based phase change material (PCM) using nano carbons