Abstract:Understanding the elemental and structural evolution from green fibers to inorganic fibers is important for fabricating high-performance ceramic fibers via the polymer-derived ceramics (PDCs) route. In a previous study, we found a novel polyborazine precursor, poly[2-propylamino-4,6-bis(methylamino)borazine-co-tri(methylamino)borazine] (PPMAB), which possesses a high ceramic yield and outstanding spinnability. Herein, we provide an insight into the evolution process from PPMAB to inorganic BN fibers. During the curing process, NH3 only reacted with the B–NHCH3 groups in PPMAB to form B–NH2 groups, which further reacted with B–NHCH3 to form B–NH–B bridges. Therefore, crosslinked networks were formed in the cured fibers and the gel content increased from 52.3 to 92.1 wt%. In the nitridation process, NH3 not only reacted with unreacted B–NHCH3 but also reacted with B–NHCH2CH2CH3 groups to form B–NH2 groups, which reacted with N–CH3 bridges in the adjacent PPMAB molecule to form –N(B3N3)3- networks. Simultaneously, CH3NH2 and CH3CH2CH2NH2 escaped from the fibers, and the carbon content of the fibers was reduced from 20.588 wt% to 0.115 wt%. By controlling the curing and nitridation processes, the curing degree can be enhanced, whereas the pore defects resulting from gas molecular escape can be effectively reduced. Thus, dense inorganic BN fibers with excellent dielectric properties (2.33 < ε < 2.5, tan δ < 3.4x10−3) and high tensile strength (1.6 GPa) were fabricated. The present study not only provides ideas for the design and synthesis of polyborazine precursors, but also for the fabrication of high-performance BN fibers.

One-dimensional electrospun alumina borate ceramics: transformation from fiber-like structure to ribbon-like structure at the increased concentrations of precursor sol

Effects of electrostatic polarities on the morphology of electrospun oxide nanofibers: A case study on alumina-based nanofibers

Insights into the pore-forming effect of polyvinyl butyral (PVB) as the polymer template to synthesize mesoporous alumina nanofibers via electrospinning

Effect of formic-acid-to-acetic-acid ratio on the structure and spinnability of aqueous aluminium sol of alumina fibre

Influence of Al2O3 Fiber on the Properties Al2O3-Based Ceramic Core

Synthesis and Characterisation of Alumina Fibres Using Organic/Inorganic Composite Sol

Confined Gelation Synthesis of Flexible Barium Aluminate Nanofibers as a High-Performance Refractory Material

Copolymer-Controlled Homogeneous Precipitation for the Synthesis of Porous Microfibers of Alumina

Facile Electrospinning Preparation of Y3Al5O12 Nanobelts

Alumina Ceramic Nanofibers: An Overview of the Spinning Gel Preparation, Manufacturing Process, and Application

Synthesis and Characterization of Polyvinyl Butyral–al(no 3 ) 3 Composite Sol Used for Alumina Based Fibers

Insight into the evolution process from novel polyborazine precursor PPMAB to inorganic BN fiber

Synthesis and characterization of sol-gel derived continuous spinning alumina based fibers with silica nano-powders

From Bulk to Porous Structures: Tailoring Monoclinic SrAl2Si2O8 Ceramic by Geopolymer Precursor Technique

Microstructural transitions and dielectric properties of boron-doped amorphous alumina thin film

Effect of the alumina and silica source mixing procedure on the microstructural evolution of alumina-mullite composite fibers prepared by sol–gel method

Synthesis and microstructural characterization of aluminum borate whiskers

Preparation and characterization of continuous alumina based fiber reinforced with orientated mullite whisker

Hydrothermal synthesis of boehmite nanorods from alumina sols

Preparation and Characterization of LaAlO3 Nanofibers Via Electrospinning

Electrospinning of pure polymer-derived SiBCN nanofibers with high yield