Abstract:In this paper, we demonstrate an optical frequency comb (OFC) based on an erbium-doped-fiber femtosecond laser, for the measurement of cavity ring-down spectroscopy (CRDS) with wavelengths of 1064, 1083, 1240, 1380, 1500, 1600, 1750 and 2100 nm. We adopt a multi-branch structure to produce high power at the specific wavelengths to meet the requirement for application in the spectral measurement. The OFC is developed by using a mode-locked fiber ring laser based on the nonlinear amplifying loop mirror mechanism. The laser is self-starting by introducing a nonreciprocal phase bias in the cavity and insensitive to the environmental perturbation. Using the chirped pulse amplification and highly nonlinear fibers, the broad spectra at the specific wavelengths are obtained. By optimizing the parameters of the pulses, the power of per mode at each target wavelength is greater than 300 nW.The frep is obtained by detecting the output of the femtosecond laser directly, while the fceo is detected by f-2f interference. The signal-to-noise ratio of the fceo is about 35 dB with a 300-kHz resolution bandwidth. By controlling the intra-cavity electro-optic modulator and piezoactuator , the frep is stabilized with high bandwidth and large range (about megahertz bandwidth and 3 kHz range). The fceo is stabilized by using feedback to the pump current of the femtosecond laser dynamically. The in-loop frequency instability degree of the fceo, evaluated by the Allan deviation, is approximately 4.95 × 10–18/τ1/2 at 1 s and integrates down to 10–20 level after 2000 s, while that of the frep is well below 5.85 × 10–13/τ. The all polarization-maintaining erbium fiber-based femtosecond optical frequency comb with multi-application branches we demonstrate in this paper is efficient and reliable for many other applications including optical frequency metrology and optical atomic clocks.

Single-branch Er:fiber frequency comb for optical synthesis at the $10^{-18}$ level

Multi-branch Fiber Frequency Comb for Precision Frequency Measurement of Molecular Transitions

A six-octave optical frequency comb from a scalable few-cycle erbium fiber laser

Multi-branch Erbium Fiber-Based Femtosecond Optical Frequency Comb for Measurement of Cavity Ring-Down Spectroscopy

A six-octave optical frequency comb from a scalable few-cycle erbium fibre laser

Tunable optical frequency comb from a compact and robust Er:fiber laser

All Polarization-Maintaining Er:fiber-based Optical Frequency Comb for Frequency Comparison of Optical Clocks

Optical and microwave metrology at the 10-18 level with an Er/Yb:glass frequency comb

Demonstration Of A Stable Erbium-Fiber-Laser-Based Frequency Comb Based On A Single Rubidium Atomic Resonator

Optically Stabilized Erbium Fiber Frequency Comb with Hybrid Mode-Locking and A Broad Tunable Range of Repetition Rate

Ultra-broadband dual-branch optical frequency comb with 10(-18) instability

Attosecond-Resolution Er:Fiber-Based Optical Frequency Comb

Long-term Frequency-Stabilized Er:fiber-based Optical Frequency Comb with Nonlinear Amplifying Loop Mirror

An All-Polarization-Maintaining Multi-Branch Optical Frequency Comb for Highly Sensitive Cavity Ring-Down Spectroscopy

Fully phase-stabilized 1 GHz turnkey frequency comb at 1.56 $μ$m

Femtosecond-laser-based optical clockwork with instability</= less than or equal to 6.3 X 10(-16) in 1 s.

Arbitrary Optical Frequency Synthesis Traced to an Optical Frequency Comb

Optical Frequency Synthesizer Referenced to an Ytterbium Optical Clock

Development of an Erbium-Fiber-laser-based Optical Frequency Comb at NTSC

Narrow-linewidth and highly stable optical frequency comb realized with a simple electro-optic modulator system in a mode-locked Er:fiber laser

A Silicon-Based Monolithic Optical Frequency Comb Source