Abstract:Graphene quantum dots (GQDs) have received great interest in the past few years due to its unique properties such as the quantum confinement and edge effects when their sizes are down to 10 nm. These new physical properties can induce size-dependent bandgap, and unique optical and electronic properties, which make them excellent materials for photovoltaics and photoelectochemical (PEC) devices. In a dye-sensitized solar cell (DSSC), light harvesting capability of dyes could be enhanced by Förster resonance energy transfer (FRET) phenomena, wherein energy is transferred from an excited donor fluorophore to a suitable acceptor dye molecule. The strict requirement that the overlap of the emission spectrum of donor and absorption spectrum of acceptor, which also requires proper band edge alignment between the them, significantly limits the variety of donors and acceptors suitable for the FRET-based DSSCs. In our DSSC work, graphene quantum dots were co-sensitized with N719 dyes and we successfully explored that the GQDs is a suitable donor material for the N719 dyes. From the emission and time decay spectra analysis, the FRET efficiency was measured to be 27 %. The power conversion efficiency ( ƞ) of the standard DSSC is 6.12 % with a short-circuit current density ( J sc ) of 12.74 mAcm -2 and open-circuit voltage ( V oc ) of 760 mV. The co-sensitization of GQD greatly enhances the ƞ up to 7.96 % with a J sc of 16.54 mAcm -2 and V oc of 770 mV. The co-sensitization of GQDs improved both the J sc and ƞ values by ~ 30 %. The FRET enhanced the overall light absorption capacity of the N719 dye and hence photocurrent generation of the DSSC. Moreover, the co-sensitization of GQDs increase the TiO 2 /dye/electrolyte interface resistance, which suppresses the charge recombination and leads to increased V oc value. For PEC water splitting, higher light absorption can also be achieved by utilizing light-matter interplaymechanisms, such as, surface plasmon resonance (SPR), plasmonicresonance energy transfer (PRET) and exciton−plasmon interactions (EPI). The optical properties of the semiconductor and metal nanoparticles (SNPs-MNPs) are strongly modified via EPI comparing to single NPs. Therefore, we have utilized the unique combination of GQDs and AuNPs (SNPs-MNPs) to effectively enhance PEC performance of TiO 2 nanorods (TNRs). The AuNP-GQD decorated TNR photoelectrode has achieved a superior PEC performance with a photocurrent density of 1.75 mAcm -2 at 1.23 V vs RHE, which is one of higher value obtained in PEC measurement using TiO 2 nanorods due to an efficient utilization of solar light. The experimental analysis has indicated that the AuNPs has contributed to the PRET / SPR-mediated hot electron injection into TiO 2 and the GQDs contributed to the improved electron injection into the TiO 2 . Moreover, the significantly improved PEC water splitting efficiency is attributed to the synergistic effect due to EPI and/or FRET between AuNPs and GQDs in addition to the good catalytic property of the AuNPs and the GQDs.

Integrative role of PEDOT: PSS in adjusting the photoresponse efficiency of novel reduced graphene quantum dots/silicon heterojunction for optoelectronics and solar energy conversion applications

The Interaction Between Quantum Dots and Graphene: the Applications in Graphene‐Based Solar Cells and Photodetectors

Multifunctioning Graphene Oxide Capping Layer for Highly Efficient and Stable PEDOT:PSS-Silicon Hybrid Solar Cells

Graphene Doping Improved Device Performance of ZnMgO/PbS Colloidal Quantum Dot Photovoltaics

Perovskite Quantum Dot-Reduced Graphene Oxide Superstructure for Efficient Photodetection

Graphene Quantum Dots Assisted Photovoltage and Efficiency Enhancement in Cdse Quantum Dot Sensitized Solar Cells

Near-infrared, Eco-Friendly ZnAgInSe Quantum Dots-Sensitized Graphene Oxide-Tio2 Hybrid Photoanode for High Performance Photoelectrochemical Hydrogen Generation

(Invited) Light Absorption Enhancement Using Graphene Quantum Dots in Dye-Sensitized Solar Cells and Photoelectrochemical Water Splitting

Regulation of the conductivity and work function of PEDOT:PSS using MoO2 nanocrystals to achieve efficient CsPbBr I3- red light quantum dot light-emitting diodes

Fabrication of graphene: CdSe quantum dots/CdS nanorod heterojunction photodetector and role of graphene to enhance the photoresponsive characteristics

Reinforcing Photogenerated Carrier Extraction of Environment-Friendly InP/ZnSeS Quantum Dots for High-Performing Photoelectrochemical Photodetection and Solar Energy Conversion.

Dual Role of Graphene Quantum Dots in Active Layer of Inverted Bulk Heterojunction Organic Photovoltaic Devices.

Preparation of Graphene/Polymer Composite Photocathode for Qdssc

Hybrid Interfacial Engineering: An Enabling Strategy for Highly Sensitive and Stable Perovskite Quantum Dots/Organic Heterojunction Phototransistors

Regulation of the Conductivity and Work Function of PEDOT:PSS Using MoO2 Nanocrystals to Achieve Efficient CsPbBrxI3-x Red Light Quantum Dot Light-Emitting Diodes

Hydrothermal Synthesis of ZnO/Graphene Quantum Dots-Polymer as an Efficient Photoanode Electrode for High-Performance Dye-Sensitized Solar Cells

Modulating the 0D/2D Interface of Hybrid Semiconductors for Enhanced Photoelectrochemical Performances

Moderately Reduced Graphene Oxide/pedot:Pss As Hole Transport Layer to Fabricate Efficient Perovskite Hybrid Solar Cells

Photovoltaic Device Application of a Hydroquinone-Modified Conductive Polymer and Dual-Functional Molecular Si Surface Passivation Technology

Enhanced performance of self-powered ZnO-based PEC type UV photodetectors by loading GQDs to construct heterojunctions

A first-principles study of optoelectronic properties and electric field modulation in PbS quantum dot/graphene hybrid systems